Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fresno
A new driveway gate in Fresno typically runs $2,800 to $8,500 installed, depending on span, material, and whether you’re adding an automatic opener. Most standard installations take one to two days once we’ve measured and ordered your gate. If you’re on acreage south or west of town where the power line stops at the barn, we’ll spec a solar setup instead, and you’ll see the full price in writing before we order a single part. Call (626) 649-4572 and a live person answers, day or night.
We work the whole Fresno market, from Copper River Ranch and the Woodward Park corridor down through the older southeast neighborhoods and out to the ag fringe past Clovis and Fowler. The soil here is its own animal. More on that below, because it’s the reason half the gates we replace were never really broken, just badly footed.
Key takeaways for Fresno homeowners:
- Post footing, not the opener, is the usual root cause of a dragging, jamming, or derailed gate on Valley clay.
- Solar is standard on acreage where mains power stops before the entrance, not a specialty upgrade.
- Written price before any work starts, shoe covers and drop cloths on every visit, and a photo of the clean-up before we leave.
- 365-Day Done Right Promise covers every gate we install. If it’s not right, we make it right, no fine print.
Why Latch & Post Gate Repair Is Fresno’s Preferred Gate Installation Company
Latch & Post has been part of the Cedarwell family of independently owned gate specialists since 2009. We’re not a general handyman service that happens to hang a gate now and then. Every gate comes down to two parts, the latch that holds it and the post that carries it, and that’s the job we focus on in Fresno.
Our Gate Installation team works this Valley soil every week. Cody Beckman, who leads our Fresno operation, grew up around the ag land south of town and knows exactly what happens to a 4-inch steel post when the clay swells in winter. That local knowledge changes how we dig, how deep we set footings, and which operator we recommend for a 20-foot farm gate versus a 12-foot swing gate in a gated community.
Every visit follows the Cedarwell C.A.R.E. routine: Clean up like it’s our own home, Ask before we move or touch anything, Respect your time and quiet hours, Explain the price before the work. We lay drop cloths on the floor and put on shoe covers before we step inside. If you have kids napping, we’ll schedule around quiet hours and use quiet tools.
Automatic Gate Installation in Fresno
Automatic Gate Installation in Fresno means pairing the right operator with a gate and post that can actually handle local conditions. On a standard residential swing gate, that’s a Ghost Controls or Viking opener wired to mains power, with safety edges and a receiver for remotes. On acreage east toward Sanger or west past Highway 99, where the panel is longer and the soil worse, we go heavier and often solar. “Automatic Gate Installation” gives you an electric opener, safety sensors, a keypad or intercom, and the wiring run sized for Fresno heat. Most jobs run $1,800 to $4,200 for the operator and installation on top of the gate itself, with solar panels adding $600 to $1,100 depending on panel count and battery bank.
A Fresno homeowner needs automatic gates when the driveway is long, the street is busy, or the gate is too heavy to swing by hand. That last one is more common than people think. A 16-foot tubular-steel gate on ag-fringe property can weigh 400 pounds, and the person opening it twice a day feels every pound.
Solar Openers for Long Acreage Entrances
When mains power ends at the barn and the gate is 300 feet further down the lane, solar is the build that makes sense. We size the panel to the operator’s duty cycle and Fresno’s short winter days, including those Tule fog weeks when direct sun is scarce. Sizing matters: an under-paneled solar opener loses capacity in the afternoon and leaves a heavy farm gate dead by evening. We don’t undersize.
Heavy-Duty Operators for Wide Farm Gates
Gates sized for a tractor or a hay trailer need an operator rated for that span and weight. A residential-class opener on a 20-foot gate stalls, burns out the motor, or strips the gearbox, the operator fails first, not the gate. We spec Ghost Controls and DoorKing operators sized for wide panels, with battery backup if you’re opening that gate through fog season.
Gate Installation Services in Fresno
Gate Installation Services in Fresno start with measuring the opening, checking the soil at both post locations, and confirming power or choosing solar. We then give you a written quote with three budget levels where it makes sense: basic, standard, and heavy-duty. You pick, and nothing is ordered until you’ve signed off on the number. Standard driveway gates in Fresno run $1,200 to $4,000 for the gate itself, with installation adding $800 to $1,600 depending on post depth and concrete work. Pedestrian gates run $300 to $900 for the gate plus $200 to $500 to hang and align it properly.
Fresno is a city of two very different housing types, and the gate work reflects that. North Fresno tract homes inside gated communities share automated entry systems with loop detectors. Outlying parcels south and west have long ranch entrances with heavy swing gates sized for equipment. We install both every month.
Sliding and Double-Drive Gates
Sliding gates need a flat track or a cantilever system, and on Fresno clay, the cantilever is often the better call because the track doesn’t sink into swelling soil. Double-drive gates spread the load across two posts and two operators, which helps when each leaf is 10 feet or more. Both take longer to install than a simple swing gate, and the written quote reflects that before we dig.
Security and Pedestrian Gates for Fresno Homes
A security gate on a Copper River Ranch property usually means a steel or aluminum frame with vertical bars, a DoorKing or Elite operator, and a keypad tied to the house. A pedestrian gate alongside it keeps kids and pets in without opening the main driveway every time. We quote both together when the opening allows, which saves you a second mobilization down the road.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fresno
We’re factory-trained on Viking, Ghost Controls, DoorKing, and Elite, the brands Fresno families and ranchers actually own. We keep common parts in our local stock so a control board or a safety edge doesn’t mean a week of waiting. If you call us about an existing Viking opener on your driveway gate in Fresno, the tech who shows up has worked on that exact model before.
Common Gate Installation Problems We See in Fresno Homes
- Gate posts heaving out of plumb on Valley clay. Winter irrigation and the ag water table make the clay swell, then summer bakes it dry. A post that was dead level in June can be an inch out of line by February, and the gate starts dragging at the latch.
- Undersized operators on wide acreage gates. A 20-foot gate built for tractors gets a residential opener rated for 12 feet. The motor burns out within a couple of seasons, and the gate never moved properly to begin with.
- Thermal binding on west-facing steel slide gates. Fresno’s 105-degree afternoons expand the steel until it binds on the track. By mid-afternoon the gate won’t move, and by evening it’s fine again. Clearance and track design matter here more than on the coast.
- Tule fog corrosion on hinges and circuit boards. Fresno’s fog season deposits moisture on everything from November through February. Hinges rust, lock mechanisms stick, and operator boards corrode even though the city barely sees rain.
Pricing for Gate Installation in Fresno, CA
Here’s what Fresno homeowners can expect to pay. A basic single swing driveway gate, powder-coated steel, runs $1,800 to $3,200 installed. A double-drive gate runs $3,500 to $6,500. Adding a mains-powered automatic opener adds $1,800 to $4,200. Solar adds $600 to $1,100. A pedestrian gate runs $500 to $1,400 installed. A heavy 20-foot farm gate with a properly sized solar operator can run $6,000 to $9,500 all in, and it should, because undersizing that job costs more the second time.
Every quote is written, itemized, and agreed before we order anything. Call (626) 649-4572 for a free measure and estimate. You’ll know the number before any work starts.
We Also Serve Cities Near Fresno
Beyond Fresno, we install and service gates in Clovis, Madera, Sanger, and Fowler. The soil and the gate styles change a little from one to the next, but the footing problem is the same Valley-wide, and so is the fix. Call us and we’ll get you scheduled.
Serving Fresno, CA - Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Fresno
It’s almost always the post, not the operator. Fresno’s alluvial clay swells when the winter irrigation season raises the water table, and it pushes gate posts out of plumb. The gate then drags at the latch or jams mid-swing. We check post depth and footing integrity first on every call in the ag fringe. Call (626) 649-4572 and we’ll tell you what’s actually moving before we sell you anything.
Yes. We spec a solar gate opener sized for the panel’s duty cycle and Fresno’s fog season, not just sunny July. The operator runs off deep-cycle batteries charged by panels we angle for winter sun. We’ve done this on long driveways off S. Dickenson Avenue where the power stopped at the barn, and the gate opens every time, all year.
We dig deeper than the standard 30 inches, bell the bottom of the hole, and use a wider concrete column so the swelling clay can’t grip and shove the post sideways. On properties near irrigation canals we go even deeper. The goal is a footing that stays put through a full wet-and-dry cycle. That’s the single biggest difference between a gate that lasts and one that heaves out in two winters.
Yes. California requires automatic gates to have safety features like reversing edges, photo eyes, or both, depending on the installation. We install and test those as part of every automatic opener job. When we’re done, your gate meets current safety requirements and we stand behind it with the 365-Day Done Right Promise.
Yes, if the operator is sized for the gate and the electronics are protected. We use operators rated for wide, heavy panels, and we mount control boards in weather-sealed enclosures. That matters in fog season when circuit boards in unsealed boxes corrode. Most failures we see are from undersized or poorly protected equipment, not from the gate itself. Call (626) 649-4572 for a straight answer on your specific setup.
Ready to get a written price on your Fresno gate installation? Call (626) 649-4572 and a live person will answer, any hour, any day. We’ll schedule a measure, give you a written quote before any work starts, and install a gate built for Valley soil and Valley summers.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Fresno and the Central Valley since 2009.