Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Clovis
If you need a new gate in Clovis, you’re looking at two numbers right away: a standard pedestrian gate install typically runs $900-$1,800, while a wide side-yard RV gate with new posts and hardware lands between $2,400 and $5,500. We can usually get a crew to your Clovis home within 2-3 business days once measurements and HOA details are sorted, and every job starts with a written price before any work begins. Call (626) 649-4572 for a free measure and a straight answer. We know Clovis gates differently than a general contractor would: the tight side returns, the HOA finish rules, and the heat that punishes cheap hardware.
Why Latch & Post Gate Repair Is Clovis’s Preferred Gate Installation Company
We’re a gate specialist, not a handyman with a gate side gig. Latch & Post Gate Repair has been part of the Cedarwell family since 2009, and every job follows the Cedarwell Care Promise: a written price before work starts, shoe covers and drop cloths on every visit, and a cleanup photo before we leave. Clovis homeowners tell us the same thing over and over: they want to know the crew will treat the house like their own. That’s the job.
Our technicians are background-checked, uniformed, and factory-trained on the brands families around Clovis actually own: Viking, Ghost Controls, DoorKing, Elite, and more. We carry common parts for those brands in our Fresno, Central Valley office, which means less waiting when a Clovis install needs a specific hinge or operator arm. Dispatch and scheduling are coordinated from that office; crews serve Clovis locally. Every call from Clovis is answered by a live person around the clock, nights and weekends included.
Gate Installation Services in Clovis
Gate Installation Services in Clovis means something specific here: most of the homes we work on are 1985-2015 stucco subdivisions on 6,000-9,000 sq ft lots, where the side return was built to store a boat or RV and the gate spanning it is 10-12 ft wide. That’s not a standard hardware-store gate. The panel weight alone, hung on unsupported posts, is enough to pull a hinge post out of plumb within five to eight summers. When we install in Clovis, we’re not just hanging a panel. We’re checking the footing, the post depth, the swing radius against the stucco, and whether the track or hinges can carry the load for a decade, not a season.
For a standard wrought iron or powder-coated steel pedestrian gate, budget $900-$1,800 depending on width, finish, and hardware. A double-swing driveway gate on new posts runs $3,200-$6,800. The written quote you get before we start includes the posts, the hardware, the removal of the old gate, and the cleanup.
RV and Double Gates
Clovis is a launchpad for Shaver Lake, Kings Canyon, and Sequoia, all within 90 minutes. That’s why so many homes here have oversized side-yard RV or boat gates. Those gates are the dominant install category in Clovis, far more than in neighboring Fresno’s older urban housing stock. Wide single-panel and double-swing RV gates need heavier-duty hinges, deeper post footings, and often a steel post sleeve to stop torque from leaning the post outward. We size all of that before the concrete goes in.
Slide and Space-Tight Conversions
A lot of Clovis side returns were built tight. The house sits close to the fence line, the driveway is shared, and a swing gate simply doesn’t have the radius to open without hitting a stucco wall or a neighbor’s car. In those cases we convert the opening to a slide gate or go rack-and-pinion, which puts the panel on a track along the fence instead of arcing into the driveway. It’s the right fix for a real Clovis layout problem, and it keeps pedestrian and vehicle access working during the install.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Clovis
Electric Gate Installation in Clovis has to account for two things at once: the San Joaquin Valley heat and the way these side returns are wired. Summers here routinely push 108-112°F, and an automatic gate operator mounted in direct sun without ventilation will burn out well ahead of its rated lifespan. We see it every July and August. When we install a new operator, we mount it with clearance for airflow, use UV-rated wiring, and position solar panels so they actually get sun rather than sitting in the shade of the house or a neighbor’s fence.
Operator installation on an existing Clovis gate typically runs $1,100-$2,400 depending on operator type, keypad or intercom hardware, and whether we’re trenching for loop detectors or running conduit along the fence. A full new gate plus operator and entry hardware lands between $3,800 and $7,500. Every quote is written, and the price is agreed before we touch anything.
Operators and Entry Hardware
We install and program operators from Viking, Ghost Controls, DoorKing, and Elite, plus keypads, intercoms, loop detectors, and remote receivers. On Clovis side returns, we often recommend a keypad over a sole remote because kids, dog walkers, and pool services all need access without a phone call. The programming is done on site, tested with your vehicles, and shown to you before we leave.
Solar and Battery Options
A shaded Clovis side yard kills a solar gate opener battery in about a year. It never fully recharges, the gate creeps, and then it stops mid-cycle at the worst time. We can size the panel to the actual sun exposure, relocate it to the fence cap or a small pole mount, or run a low-voltage line from the house when trenching is possible. We’ll show you the numbers for each before you decide.
Trusted Brands We Service in Clovis
Our technicians are factory-trained on the gate operators Clovis homes actually use: Viking, Ghost Controls, DoorKing, and Elite. When a Clovis install requires a specific receiver board, hinge, or safety photocell, we can usually pull it from our Fresno office stock the same week rather than waiting on a distributor. That matters when your gate is off its post and the side return is open. We also handle LiftMaster, FAAC, BFT, Linear, and Mighty Mule for existing installations across the Clovis area.
Common Gate Installation Problems We See in Clovis Homes
- HOA architectural review delays. In master-planned communities like Harlan Ranch and Loma Vista, the finish and material of your new gate often need approval before install. We can tell you what’s likely to pass, get the spec sheet together, and coordinate the submittal so the job isn’t stalled at the last step.
- Hinge posts leaning under heavy RV panels. The 10-12 ft unsupported span on a Clovis side-yard gate slowly torques the hinge-side post outward until the gate binds against the stucco. A new install should include a deeper footing or a steel post sleeve so this doesn’t repeat in six years.
- Too little swing room on shared driveways. Tight rights of way in Clovis’s 1985-2015 planned subdivisions often leave no space for a swing gate to open cleanly. A slide conversion or rack-and-pinion track uses the fence line instead of the driveway and keeps the opening functional.
- Rusted hardware from heat-fractured powder coat plus Tule fog. The 108°F summers micro-crack the finish on steel and wrought iron; the December-to-February Tule fog pushes moisture straight into the cracks. We install stainless or galvanized hinges and rollers where we can and use rust-inhibiting hardware on every outdoor Clovis install.
Pricing for Gate Installation in Clovis, CA
Here’s what Clovis gate work actually costs based on recent installs we’ve quoted across the city:
- Pedestrian gate, 4-6 ft, new posts and hardware: $900-$1,800
- Wide side-yard RV gate, 10-12 ft, new posts and hardware: $2,400-$5,500
- Double-swing driveway gate, new posts and hardware: $3,200-$6,800
- Electric operator added to existing gate: $1,100-$2,400
- Full new gate plus operator and entry hardware: $3,800-$7,500
These ranges reflect Clovis’s market: the prevalence of wide RV returns, HOA finish requirements, and hardware that has to survive Valley heat. Your written quote includes the measure, the removal of the old gate, all post and footing work, hardware, installation, and cleanup. Call (626) 649-4572 to schedule a free measure. You’ll see the exact number before we start, and that number doesn’t change mid-job.
We Also Serve Cities Near Clovis
Our crews serve Clovis and the surrounding Central Valley area, including Clovis neighbors like Fresno, Sanger, Fowler, and Madera. If you’re just outside Clovis proper, call us and we’ll confirm coverage for your street. Every job gets the same written-price, cleanup-first standard.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Clovis
Because the standard Clovis side-yard gate is 10-12 ft wide and very heavy, and the hinge-side post rarely has the footing depth to carry that unsupported span. Within five to eight years the post leans outward and the gate binds against the stucco, which means the fix is a post reset and re-poured footing rather than new hinges. Call (626) 649-4572 and we’ll tell you over the phone whether your gate leaning sounds like a post problem or a hardware issue.
In most cases, yes. Harlan Ranch and Loma Vista are HOA-governed master-planned communities that mandate specific gate materials and finishes through architectural review, and replacing with an off-spec color or material can get flagged. We coordinate the finish and material submittal before we order anything, so you’re not paying for a gate that gets rejected.
A slide gate or rack-and-pinion conversion is the standard fix. The panel runs along the fence on a track instead of arcing into the driveway, which keeps the shared right of way clear and gives you back the full opening width. We’ll measure the side return and tell you which option fits before you commit to hardware.
The 108-112°F summer heat can overheat a poorly mounted operator, and the December-through-February Tule fog adds sustained moisture to hinges, rollers, and electronics that were already stressed. We mount operators for airflow, use UV-rated wiring, and choose rust-resistant hardware. High-tension springs and cables on an automatic gate carry real risk; we don’t give step-by-step DIY guidance for tension work. This is one that belongs with a trained pro.
Yes. We can run conduit along the fence line, trench in the softscape beside the driveway, or use wireless options where the layout allows, so the concrete stays intact. We’ll look at your specific side return and show you the routing options before any cutting or digging starts. Call (626) 649-4572 for a free look, and you’ll get the quote in writing.
If you’re in Clovis and you need Gate Installation done right, call us at (626) 649-4572. A live person answers, day or night. We’ll schedule a free measure, talk through the HOA details, and put the price in writing before any work starts.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Clovis with the Cedarwell Care Promise: written pricing, clean floors, and a cleanup photo before we go.