Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Clovis, CA
Clovis sits at the edge of the Sierra Nevada foothills, and that shapes nearly every gate job we do here. The post-1990 subdivisions that define this city came with wide side-yard gates built for boats, RVs, and weekend trips to Shaver Lake or Kings Canyon. Those gates are heavier than standard pedestrian gates, and they sit under Valley sun that reaches 108°F in summer and Tule fog that returns every winter. We’re a gate company built for exactly those conditions. If you need Gate Repair in Clovis or a full replacement, call us at (626) 649-4572 and we’ll give you a written price before any work begins.
Why Clovis Homes Are Different
Clovis is overwhelmingly 1985-2015 planned-subdivision housing: stucco homes on 6,000-9,000 square foot lots, and a wrought iron or powder-coated steel side gate as a near-standard feature. Lots sized for RV storage often include a secondary 10-12 foot wide gate on the side return, and that unsupported span puts constant stress on post-mount hinges. We see the same failure pattern across northeast neighborhoods: the hinge-side post leans outward within five to eight years, the gate starts binding, and the homeowner assumes the latch or hinges need replacing. Often it’s the post that needs resetting in fresh concrete.
Add Clovis’s climate and the picture gets clearer. Summer heat in the 108-112°F range bakes powder coating until it micro-cracks, warps wooden gate posts, and shortens the life of automatic operator motors. Then the December-to-February Tule fog delivers months of sustained moisture straight into those cracks. Hinges, rollers, and latch hardware rust faster here than homeowners expect. Many Clovis gate repairs are less about a broken part and more about how the Valley weather has been working against the hardware for a decade.
Our Main Clovis Services
Most Clovis homeowners call us for one of three things: a gate that won’t close properly, a new gate matched to their HOA’s requirements, or an electric opener that stopped responding.
Gate Repair in Clovis
Most repair calls in Clovis involve wide RV gates that have started sagging or binding. The heavy single-panel design common in this city means the hinge-side post takes enormous load, and when it leans, the latch no longer lines up. We reset posts in concrete, replace hinges rated for the panel weight, and adjust the latch so the gate closes without dragging. Before we start, you get a written price. Learn more about Gate Repair in Clovis.
Gate Installation in Clovis
Installation in Clovis often means working inside an HOA-governed community like Harlan Ranch or Loma Vista, where architectural review may require a specific material or finish. We’re familiar with that process and can size a gate to the opening, set posts to the right depth, and hang the panel so it swings cleanly for years. You’ll see the full written price before we order anything. Details are on our Gate Installation in Clovis page.
Electric Gate Repair in Clovis
Electric gate problems in Clovis tend to follow the seasons: motor burnout after a hard summer, or moisture-related sensor failures during fog season. We service Linear, Viking, Ghost Controls, and DoorKing openers, among others, and we can usually diagnose the issue on the first visit. Some repairs are a circuit board swap; others need a post realignment so the operator isn’t fighting the gate’s weight. See Electric Gate Repair in Clovis for specifics.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Clovis
We work on the brands Clovis homes actually have installed: Linear, Viking, Ghost Controls, and DoorKing are common here. Our technicians are factory-trained on these systems, and we keep replacement parts moving for the models we see most in the Valley. See our brands for the full list. Most repairs are completed on the first visit because the right part is already on the truck.
Pricing for Gate Company in Clovis, CA
| Service | Typical range in Clovis |
|---|---|
| Standard gate-latch replacement | $145 - $285 |
| Hinge repair or replacement | $160 - $320 |
| Gate post reset in concrete | $220 - $410 |
| Single-panel RV gate realignment | $190 - $380 |
| Electric operator motor replacement | $390 - $740 |
| Circuit board repair | $225 - $410 |
| Safety sensor replacement | $120 - $230 |
| Full gate installation (standard side-yard) | $1,450 - $3,200 |
| Electric gate opener installation | $1,200 - $2,600 |
What pushes a Clovis quote higher is usually the gate’s weight and the post condition: a 12-foot RV panel that has already leaned its post out of plumb takes more labor to correct than a standard pedestrian gate. HOA material requirements can also shift the price. Whatever the job, our written price comes before any work starts, and that is the number you pay unless we discover something new and get your approval first.
Neighborhoods We Serve in Clovis
We work across Clovis, from the newer master-planned communities on the north and east sides to the established subdivisions closer to Old Town. Our technicians know the gate profiles in each area, and we schedule with the family’s routine in mind.
- Harlan Ranch
- Loma Vista
- Quail Lakes
- Buchanan Estates
- Clovis West area
Most Clovis neighborhoods can be reached within the hour during a normal business day, and we coordinate quiet-tool work around nap schedules when asked.
Service Area – Cities Near Clovis
Our Clovis scheduling is coordinated from the Cedarwell family’s Fresno, Central Valley office, and we also serve nearby communities. If you’re in Fresno, TX, Sanger, TX, Fowler, CA, or Madera, CA, the same care routine and written-price promise apply. Call and we’ll let you know the next available window for your area.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Clovis
Most Clovis neighborhoods are reachable within the hour during a normal business day. We answer calls around the clock, so if a gate is stuck open at night, someone will take your call and help you figure out the next step. Emergency dispatch depends on where our technicians are at that moment.
Often, yes. Master-planned communities like Harlan Ranch and Loma Vista may require architectural review before a gate’s material or finish changes. If you know your HOA’s rules, we’ll work within them. If you don’t, we can usually tell you what questions to ask your HOA manager before we move forward.
Every visit includes shoe covers and drop cloths before we step inside, and we take a photo of the clean-up before we leave. That is the Cedarwell Care Promise, and it is not an upsell. We ask before moving anything, and we keep tools quiet when there are sleeping kids in the house.
If your gate is sagging, stuck, or just loud enough to wake the baby, call Latch & Post Gate Repair at (626) 649-4572. Cody Beckman and the team will give you a straight answer and a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Clovis Customers Say
"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide