Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Fresno, TX
Fresno gates face a problem most Texas gate companies never see: the ground itself moves. The San Joaquin Valley’s clay soil swells when wet and shrinks hard in summer, and that seasonal shift heaves posts, skews hinges, and jams latches in ways that have nothing to do with the gate hardware itself. We’re Latch & Post Gate Repair, a Cedarwell-family gate specialist, and we work on exactly three things: gate repair, gate installation, and electric gate repair. If your gate is leaning, dragging, or refusing to close, call us at (626) 649-4572 and we’ll give you a straight answer.
Why Fresno Homes Are Different
Fresno sits on deep alluvial clay, and Fresno gates sit on top of it. In a wet winter, that clay expands and can push a 4-inch steel post sideways by more than an inch. In a dry summer, it shrinks and the post settles back, often at a slightly different angle. Repeat that cycle a few times and a gate that once latched perfectly now catches on the strike plate or derails off its track. We check post depth and footing integrity on nearly every service call here, because in Fresno the soil is usually the real problem, not the latch.
The housing stock adds a second layer. North Fresno neighborhoods like the Woodward Park corridor and Copper River Ranch are full of master-planned communities with shared automated entry gates, loop detectors, and operators that get called on daily by hundreds of vehicles. Out toward the ag fringe, south and west of town, we see ranch-style properties with heavy tubular-steel driveway gates sized for tractors and equipment trailers. The hardware is different, the load is different, and the repair approach has to be different too.
And then there’s the weather. Fresno summers push past 105°F, which bakes operator wiring, warps untreated wood gates, and causes thermal binding on west-facing steel slide tracks by mid-afternoon. But the bigger surprise for most homeowners is the Tule fog. From November through February, that dense Valley fog deposits moisture on hinges, lock cylinders, and circuit boards, and we get corrosion failures that nobody expects from a place known for dry heat.
Our Main Fresno Services
Most Fresno homeowners call us for one of three reasons, and each has its own dedicated Fresno page with local pricing and details specific to this city’s soil, climate, and housing stock.
Gate Repair in Fresno
A leaning post, a latch that won’t catch, a slide gate that binds mid-afternoon. In Fresno, most repairs come back to the clay soil shifting under the post or the summer heat warping something that used to line up. We start by checking whether the footing is still solid, because replacing a latch on a post that’s actively moving is just buying time. Then we quote the fix in writing before anything gets touched. Full details, including Fresno-specific pricing, are on our Gate Repair in Fresno page.
Gate Installation in Fresno
Installing a gate in Fresno means building for the ground you’re putting it in. Whether it’s a new driveway gate in a north Fresno HOA community or a heavy equipment gate on a ranch parcel toward the ag fringe, the post footings have to be deep enough and the hardware sized for the load. We measure, spec the gate, and give you a written price before any work starts. Every installation is covered by our 365-Day Done Right Promise. See the Gate Installation in Fresno page for what’s included and what it costs here.
Electric Gate Repair in Fresno
Fresno’s summer heat ages operator wiring faster than most places, and the Tule fog season takes its own toll on circuit boards and limit switches. When an electric gate stops mid-cycle or won’t respond to a remote, we troubleshoot the operator, the loop detector, the safety edges, and the power supply. Our technicians are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Local pricing and common failure modes are spelled out on the Electric Gate Repair in Fresno page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fresno
We’re factory-trained on the gate operators Fresno families actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means we can usually identify the fault on the first visit and carry the right part on the truck. See our brands for the full list.
Pricing for Gate Company in Fresno, TX
| Service | Typical range in Fresno |
|---|---|
| Standard gate-latch replacement | $140-$280 |
| Gate hinge replacement (single) | $180-$320 |
| Post re-setting or concrete re-bedding | $350-$750 |
| Slide gate track realignment | $250-$550 |
| Swing gate operator install (single) | $1,200-$2,400 |
| Slide gate operator install | $1,800-$3,200 |
| Electric gate troubleshooting / diagnostics | $95-$180 |
| Loop detector replacement | $300-$600 |
| Safety edge replacement | $250-$500 |
| New driveway gate installation (swing, steel) | $1,500-$3,500 |
Fresno prices skew slightly higher for post work, because the clay soil means we’re often digging deeper for a proper re-bed rather than doing a surface patch. Thermal binding on slide gates can also add a track adjustment to what looked like a simple operator repair. Whatever the job, you get a written price before any work starts, and that number doesn’t change unless you approve a change first.
Neighborhoods We Serve in Fresno
We work across Fresno, from the gated communities off the Woodward Park corridor to the ranch parcels south and west of the city. Our dispatch and scheduling are coordinated from the brand’s Houston office, with crews serving Fresno locally.
- Woodward Park corridor
- Copper River Ranch area
- Older southeast-side neighborhoods near irrigation canals
- Ranch properties south and west toward the ag fringe
- Master-planned communities with shared entry gates
Most Fresno calls can be scheduled within a few days; we’ll confirm the window when you call and let you know if an earlier slot opens up.
Service Area – Cities Near Fresno
We also serve families in nearby communities, including Missouri City, TX, Manvel, TX, Stafford, TX, and Sugar Land, TX. If you’re on the edge of Fresno or just over the line, give us a call and we’ll confirm coverage.
Serving Fresno, TX - Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fresno
Many north Fresno communities, especially along the Woodward Park corridor and Copper River Ranch, have architectural guidelines that require HOA approval before a gate style or material changes. Call your HOA or management company first; we’ll work from their spec sheet and match the finish they require.
Most Fresno repair calls are scheduled within a few days. We always answer live, 24/7, so call (626) 649-4572 and we’ll find the earliest window that fits your schedule, including weekends.
Yes, that’s part of the job. We coordinate the power run, the operator, the safety edges, and the loop detector so the gate works as one system. You’ll see a written price for all of it before work begins.
Contact Latch & Post Gate Repair in Fresno
If your gate is leaning, dragging, or refusing to respond, we’ll come out, figure out what’s actually going on, and give you a written price before anything gets touched. Our technicians wear shoe covers, lay drop cloths on floors they cross, and send you a cleanup photo before they leave. Call (626) 649-4572 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fresno Customers Say
"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide