Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fresno
Gate installation in Fresno means solving two problems at once: the span and the soil. A 16-foot farm gate needs a real footing and an operator sized for the weight, while Fresno’s alluvial clay swells through the winter irrigation cycle and shrinks hard every summer, so a post that was plumb in April can lean over an inch by February. We know this because we work here every week. If you need a new driveway gate, a pedestrian gate, or a solar-powered opener on a rural parcel, call (626) 649-4572 and we’ll come look at your site, write you a price, and explain exactly what the soil is going to do to your posts over the next five years.
Why Latch & Post Gate Repair Is Fresno’s Preferred Gate Installation Company
We’re a Gate Installation specialist, not a general contractor who occasionally hangs a gate. Every technician we send to Fresno is background-checked, uniformed, and factory-trained on the brands families actually own out here: Viking, Ghost Controls, and DoorKing among them. We are part of the Cedarwell family, independently owned and operated since 2009. The 365-Day Done Right Promise covers every installation we do in Fresno, from a simple pedestrian gate in the Woodward Park corridor to a solar-powered cattle gate off the southeast ag fringe. If it isn’t right, we make it right. No argument, no fine print.
We answer the phone around the clock. A live person, not a voicemail tree. When a Fresno homeowner calls at 9pm because a newly installed gate won’t latch, someone picks up and talks it through. That matters here, because Fresno’s winter Tule fog can roll in and leave a new operator’s circuit board wet and confused, and by morning the gate is stuck open. You don’t want to wait until business hours for that call to go through.
Our Fresno customers consistently mention two things in reviews: the written price before any work starts, and the condition of their floors after we leave. We wear shoe covers and lay drop cloths on every visit, even on an outdoor gate job where we step through the house to reach the control panel. We take a photo of the cleanup before we go. That’s the Cedarwell C.A.R.E. routine: Clean up like it is our own home. Ask before we move or touch anything. Respect the family’s time and quiet hours. Explain the price before the work.
Gate Installation Services in Fresno
Gate Installation Services in Fresno begin with the post holes, because the soil here decides everything else. Fresno sits on deep alluvial clay that expands during the winter irrigation cycle and agricultural water-table shifts, then shrinks and cracks through the bone-dry summer. A gate post set in a standard footing will heave and lean within a season or two, dragging the gate panel with it. So we dig deeper, backfill wider, and design the footing around soil movement, not just the weight of the gate. The job typically includes removing the old gate and operator, setting new posts, hanging the new gate panel with adjusted hinges, installing the operator and safety photocells, and programming keypads or remotes. For a standard driveway swing gate in Fresno, you’ll usually be somewhere between $2,800 and $6,500 installed, depending on width, material, and whether you’re adding automation. A pedestrian gate runs $900 to $2,400. You’ll see the exact number in writing before we touch anything.
Swing Gates and Double Gates
Most Fresno homes with a front driveway gate have a swing gate, and many acreage properties use a double swing gate for equipment access. The wider the span, the more the soil matters, because each post carries more lateral load. On a double gate we set both hinge posts in oversized footings and check the reveal between panels so the latch catches cleanly even after a wet season shifts things a fraction.
Sliding Gates
Sliding gates work well where the driveway slopes or where a swing gate would block the yard. In Fresno, west-facing slide gates get direct afternoon sun, and the steel track expands enough to bind by mid-afternoon on a 105-degree day. We account for that with proper clearance and roller spacing, and we check the rack and pinion alignment before we leave.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Fresno
Electric Gate Installation in Fresno is as much about power as it is about the gate itself. On city lots, we can usually tap an existing circuit and hardwire a Viking or DoorKing operator with a battery backup. On rural parcels south and west of Fresno, the nearest power drop is often 200 feet away or more, and running conduit gets expensive quickly. That’s when a solar gate opener makes sense. A solar kit includes the panel, a deep-cycle battery, the operator, safety photocells, and a charge controller. For a typical rural electric gate install around Fresno, expect $4,200 to $9,000 depending on gate width, weight, and whether we’re running AC power or going solar. You’ll get a written quote before any work begins, and the price we agree on is the price you pay.
Solar Gate Openers
A solar opener has to survive Fresno’s two extremes: 110-degree summers that cook batteries and age panel wiring fast, and Tule fog winters that can starve a panel of direct sun for weeks. We size the panel and battery for the fog season, not the summer, and we use heat-rated wire insulation so the panels hold up. If your gate is more than 16 feet wide or heavy tubular steel, we’ll recommend a heavier-duty operator and explain why.
Safety Photocells and Entrapment Protection
Any new automatic gate in Fresno needs compliant entrapment protection, which usually means safety photocells across the gate opening and a reversing edge or monitored sensor. This is not an upsell. It’s the law and it’s the right thing when kids and pets live on the property. We wire and test every sensor before we hand you the remote.
Trusted Brands We Service in Fresno
We install and service Viking, Ghost Controls, and DoorKing operators across Fresno, along with the other major brands. Our techs are factory-trained on the specific control boards and limit-switch logic these brands use, so the first visit usually ends with a working gate, not a part on order. For Fresno customers we can source local parts quickly through the Houston parts desk, and common components like photocells, remotes, and batteries are often on the truck already. When you call about a Ghost Controls opener acting up in the fog, we know exactly which firmware and which corroded connector to check first. That’s what brand training means in practice.
Common Gate Installation Problems We See in Fresno Homes
- Hinge posts heaving out of plumb. Fresno’s alluvial clay swells every winter and shrinks every summer, pushing posts sideways and causing the gate panel to sag and drag. A sag correction that ignores the footing fails again within the year.
- Solar openers undercharging in Tule fog. The dense fog that blankets the Valley from November through February cuts panel output dramatically, leaving batteries weak and gates sluggish or dead. We size solar systems for fog season, not summer.
- Oversized farm gates overloading residential operators. Wide, heavy equipment-access swing gates on southeast and west Fresno parcels wear out the rack and pinion fast on an undersized operator. By mid-afternoon, the west-facing steel has thermally expanded and bound the track.
- Untreated wood warping under 105-degree sun. Fresno’s summers are brutal on wood gates. Without proper sealing and hardware spacing, boards cup and the gate loses its square, causing the latch to miss the striker.
Pricing for Gate Installation in Fresno, TX
Here are the numbers we typically quote for Fresno. A standard steel driveway swing gate with a single operator runs $2,800 to $6,500 installed. A double swing gate for a wide driveway or equipment access runs $5,500 to $12,000 depending on span and post conditions. A solar-powered rural gate install runs $4,200 to $9,000 with the panel, battery, and safety photocells included. A pedestrian gate runs $900 to $2,400. The variables that move the price here are gate width and weight, whether we’re going solar or hardwired, and how deep we have to go to reach stable soil below the clay. You’ll always get a written price before we start, and it’s the price you’ll pay when the work is done. Estimates are free.
We Also Serve Cities Near Fresno
Our Gate Installation in Fresno team also covers Missouri City, Manvel, Stafford, and Sugar Land. If you’re on a farm road just outside the Fresno limits, we’ll still come out and look at your gate. The clay doesn’t stop at the city line, and neither do we.
Serving Fresno, TX - Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Fresno
Yes. We install solar gate openers on rural Fresno properties all the time. The system includes a panel, deep-cycle battery, charge controller, and an operator sized for your gate’s width and weight. We size the panel and battery for Fresno’s foggy winters, not the sunny summers, so the gate keeps working through the Tule fog season. Call (626) 649-4572 for a free site estimate and we’ll write up a price with the exact equipment list.
Because the post was reset without fixing the footing. Fresno’s alluvial clay swells in the winter and shrinks in the summer, and a post set in a shallow or standard footing will move seasonally no matter how straight it looks in April. The fix is a deeper, wider footing with a backfilled base that resists lateral movement. We do this on every gate installation in Fresno, and we’ll show you the difference on your next service call.
We regularly install swing gates from 12 to 20 feet wide on Fresno-area farms and ranches, and double gates up to 24 feet or more for equipment access. The key is matching the operator to the actual weight of the gate and setting hinge posts in footings that can handle the clay. For a wide farm gate, expect the installed price to run $5,500 to $12,000 depending on the steel, the footing work, and whether you want solar or hardwired automation. Call (626) 649-4572 and we’ll come measure the opening and write you a quote.
Yes. Any new automatic gate has to be installed with compliant entrapment protection, which means safety photocells and a reversing edge or monitored sensor. This is a requirement, and it’s also practical when kids and pets live on the property. We include and test all required safety devices on every electric gate installation in Fresno, and we’ll explain how they work before we finish.
Fresno’s 105 to 115 degree summers degrade operator wiring insulation and warp untreated wood gates, while Tule fog deposits moisture on circuit boards and hinge hardware from November to February. We use heat-rated wiring, corrosion-resistant components, and we size solar systems for the fog season. These aren’t extras; they’re part of how a gate install in Fresno should be done from the start.
Call Latch & Post Gate Repair for Gate Installation in Fresno
If you need a new gate on a drive, a driveway off Highway 6, or a ranch entrance south of town, we’ll come out, look at the soil, measure the opening, and write you a price. No pressure. No surprises. You’ll see the number before we touch anything, and the 365-Day Done Right Promise covers the work afterward. Call (626) 649-4572 for a free estimate, day or night. A live person answers.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Fresno since 2009.