Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Madera
A new gate for a Madera property runs roughly $2,400 to $9,800 installed, depending on whether you need a simple chain-link swing gate for a backyard or a heavy automated slide gate across a ranch driveway. We serve homes on the in-town grid, the horse parcels of Madera Ranchos, and the working properties along Avenue 12 through Avenue 17. When you call (626) 649-4572, a live person answers. We’ll talk through what your driveway actually needs, send a technician to measure, and hand you a written price before any work begins.
Why Latch & Post Gate Repair Is Madera’s Preferred Gate Installation Company
We’re part of the Cedarwell family, independently owned and operated, and we’ve focused on one trade since 2009: gates. Not fences, not general contracting. The latch that holds the gate and the post that carries it.
Madera homeowners call us because the technician who arrives understands what a 105°F San Joaquin Valley summer does to a control board, and what irrigation-fed alkali soil does to a steel anchor plate. That’s specific knowledge. It comes from working here, not from a training manual. Our technicians are background-checked, uniformed, and factory-trained on the equipment families in this area actually run: FAAC, BFT, Linear, Viking, and more.
Every visit includes the Cedarwell Care Promise: a written price before work starts, shoe covers and drop cloths inside your home, and a photo of the clean-up before we leave. No upsell, no pressure. And every installation carries the 365-Day Done Right Promise. If it isn’t right, we make it right. No argument.
Electric Gate Installation in Madera
Electric Gate Installation in Madera usually means one of two jobs: retrofitting an existing manual gate with an operator, or replacing an old operator that has finally died from years of Valley heat. A basic single-swing operator installation on an in-town Madera home typically runs between $1,800 and $3,400. A heavy slide gate operator on a ranch property, with new safety photocells and a reinforced post, usually lands between $4,200 and $7,500.
What surprises most Madera homeowners is how much of the job is preparation. Before we mount any operator, we check the post footing for alkali corrosion, verify the gate’s travel path is clear, and confirm the hinges or rollers can carry the added load. An operator bolted onto a failing post is a callback waiting to happen.
Retrofitting an Operator to an Existing Gate
If your manual gate is structurally sound, retrofitting is often the cheaper answer. We install the operator, wire the safety photocells required for automatic operation, and program the remote controls. The gate never needs to leave your property. This is common for Madera Ranchos properties where the homeowner installed a chain-link or pipe-panel gate years ago and now wants an opener.
Full Operator Replacement
When the old control board has already gone through two or three ‘summer burnout’ cycles, replacement beats repair on cost. A rebuilt board on a ten-year-old operator may last one more season. A new LiftMaster or FAAC unit installed correctly will handle Madera’s heat for years. We’ll show you both numbers in writing and let you decide.
Driveway Gate Installation in Madera
Driveway Gate Installation in Madera splits into two very different jobs. In-town homes on 6,000-square-foot lots typically need a single swing gate or a simple sliding gate at the driveway mouth, running $2,400 to $5,200 installed. Ranch properties on one-acre-plus parcels, where the driveway is a long setback from the road, usually need a heavy tubular-steel slide gate sized for truck access, running $5,800 to $9,800.
The soil matters more than most people realize. Along Avenue 12 and Avenue 17, irrigation runoff leaves the ground alkali-heavy. Standard galvanized anchor plates corrode faster than they should. We use heavier-gauge anchor hardware and, where the soil is particularly aggressive, set posts in concrete with drainage channels to slow the corrosion. That’s not standard practice on a suburban job. It’s standard practice on a Madera ranch job.
Swing Gates for In-Town Homes
Most Madera homes built in the 1950s through 1970s have compact driveways. A single swing gate keeps the footprint small and the hardware simple. We can match the gate to your existing fence material, powder-coat the steel to handle Valley sun, and hang it so it clears the sidewalk without dragging.
Slide Gates for Ranch Driveways
On Madera Ranchos lots, a swing gate means sweeping a wide arc across the driveway every time it opens. A slide gate runs parallel to the fence line, which is why almost every large property here uses one. We build these with steel frames sized for full-size trucks and farm equipment, then set the roller track on a concrete base that won’t settle unevenly.
Trusted Brands We Service in Madera
We install and service equipment from FAAC, BFT, Linear, and Viking, plus LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule. What that means for Madera customers is simple: when a technician arrives, they already know the equipment on your gate. We don’t learn on your dime. We carry common parts locally, including control boards, limit switches, and photocells, so a repair or retrofit can often happen in one visit instead of two.
Common Gate Installation Problems We See in Madera Homes
- ‘Summer burnout’ on older control boards. Sustained heat above 105°F overheats circuit boards and cracks wiring insulation. We see this on operators that ran fine all winter, then died in July. Retrofit with a modern board or replace the operator entirely.
- Alkali-soil corrosion at the gate base. Along the Avenue 12-Avenue 17 corridor, anchor plates and base welds corrode while the visible gate face still looks fine. We check the base on every installation, even when the customer only asked about the operator.
- Posts that shifted in irrigation-fed soil. Ranch properties with flood or drip irrigation near the gate line often have posts that lean a few degrees. A new gate hung on a leaning post will bind. We reset the footing before we hang anything.
- Tule fog moisture damage in winter. December through February, dense fog pushes moisture into operator housings. Contactors and limit switches that baked all summer now corrode. We use sealed housings and dielectric grease on connections for Madera installs.
Pricing for Gate Installation in Madera, CA
A simple manual gate for an in-town Madera home starts around $1,200 to $2,200. Add an operator and you’re at $3,000 to $5,200. A heavy ranch slide gate with automation lands between $5,800 and $9,800, depending on gate length, steel gauge, and whether we’re resetting posts in alkali soil. Every quote includes the written price before work begins. Always. You’ll know the number before we touch anything, and that number is what you pay. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Madera
Our Madera crews also handle Gate Installation in Fresno, Clovis, Kerman, and Chowchilla. If you’re on the edge of Madera or just over the county line, call and ask. Chances are we’re already working nearby. For more on our local coverage, see Gate Installation in Madera.
Serving Madera, CA - Our Local Coverage Area
We’re based in the Madera area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Madera
Alkali-heavy soil, common along the Avenue 12-Avenue 17 corridor, accelerates corrosion on anchor plates and base welds. We address it by using heavier-gauge anchors, setting posts in concrete with drainage, and inspecting the base even when the visible gate face looks fine. A standard installation without this step will fail at the base in a few years. Call (626) 649-4572 and we’ll check your soil before quoting.
Usually, yes. Sustained 105°F+ temperatures overheat older control boards and crack wiring insulation. If your operator dies every July and works again in October, the board is failing from heat stress. Replacing the board may buy a season. Replacing the operator with a modern unit built for continuous heat is often the cheaper long-term fix. We’ll show you both prices in writing.
Often, yes. If the gate itself is structurally sound and the post footing hasn’t corroded or shifted, we can mount a new operator, wire the safety photocells, and have the gate running on modern remotes. We’ll inspect the post base and hinges before recommending a retrofit. If the base is compromised, replacement is the honest answer. Estimates are free.
Automatic gates require safety photocells that stop and reverse the gate if anything crosses the path, plus a manual release so the gate can be opened by hand during a power outage. We install these on every automated gate, no exceptions. This is not optional hardware. It protects your kids, your pets, and anyone using the driveway. Call (626) 649-4572 with questions.
Yes. Many ranch parcels in Madera Ranchos don’t have power at the gate line, and running conduit from the house costs more than the operator. Solar gate openers from FAAC, BFT, and Viking work well here, especially paired with a battery bank for the foggy winter weeks. We’ll size the panel and battery for your gate’s cycle count. Estimates are free.
Contact Latch & Post Gate Repair in Madera
Call (626) 649-4572 for a free, no-pressure estimate on any gate installation in Madera. A live person answers, day or night. We’ll schedule a measure, hand you a written price, and if you say yes, we’ll do the work the Cedarwell Care way: clean floors, straight answers, and a photo of the clean-up before we leave. No surprises.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Madera since 2009 as part of the Cedarwell family.