Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Hurst
Gate installation in Hurst usually costs between $1,400 and $6,800 depending on the gate’s span, the operator you choose, and what has to happen with the post footing. In this city the footing is almost always the real job, not the panel itself. Hurst sits on Blackland Prairie clay that swells after spring rain and shrinks hard in summer, and most of the homes here were built in the 1960s and 70s with gate posts that were never set deep enough for that movement. We design every Hurst gate install around the soil first, then the gate. Call (626) 649-4572 for a written, no-pressure estimate at your home.
Why Latch & Post Gate Repair Is Hurst’s Preferred Gate Installation Company
We are a gate-only shop, not a general handyman service. That narrow focus matters in Hurst because the failure mode here is so consistent: the clay moves, the post leans, the gate racks, and the hardware gets blamed. We know to check post plumb before we touch a hinge or an opener, and we explain what we find before we quote a dollar figure.
Cody Beckman leads our crews, and the team works under the Cedarwell C.A.R.E. values on every Hurst job. That means shoe covers and drop cloths inside your home, a photo of the cleanup before we leave, quiet tools when kids are asleep, and a written price before work begins. No upsell pressure. The 365-Day Done Right Promise covers every installation: if it is not right, we make it right.
Dispatch and scheduling are coordinated from the brand’s Dallas-Fort Worth office, and crews serve Hurst locally. Calls go to a live person 24 hours a day, seven days a week, including holidays.
Sliding Gate Installation in Hurst
Sliding Gate Installation in Hurst is the most common solution we recommend for wide driveway entrances, especially on the acreage properties along Pipeline Road, Bellaire Drive, and the long residential lots near Shady Brook. A slide gate rides on a track instead of swinging through an arc, which means you keep all your usable driveway space and the gate does not fight the slope or the heaving soil the way a swing gate does. On a typical Hurst ranch lot a new slide gate runs $2,200 to $6,800, including the gate panel, track, posts, and operator. The footing and track bed usually drive the final number more than the gate itself.
Self-Supporting Track for Clay Ground
In Hurst we build slide gates so the gate’s weight sits on its own concrete track pad rather than hanging off the posts. That matters here because a post that shifts a half inch will bind a hanging gate. The track keeps the gate true even as the surrounding soil swells and shrinks through the season.
Wide Farm Entrances and Setbacks
For gates wider than 14 feet we size the track and the operator for the full panel weight, and we set the footing deeper than code minimums. Hurst clay expands laterally after rain, and a short footing on a wide gate will lean within a year.
Gate Opener Installation in Hurst
Gate Opener Installation in Hurst comes down to power first. Many of the longer driveways in the northeast part of the city, and the acreage lots closer to the HEB area, sit far enough from the panel that running mains power to an opener would mean a 40-to-80 foot trench through root-heavy clay. That trench can cost more than the operator. Solar openers sized for the actual gate weight and span are often the smarter choice here, and the math changes with the length of your run. Expect $1,100 to $3,400 for a complete opener install, depending on whether you need solar, the operator’s capacity, and the safety accessories required.
Solar Power for Long Hurst Drives
When the gate is more than about 60 feet from a power source, we recommend solar. A properly sized solar opener with a good panel and battery keeps a wide gate working through North Texas winters, especially if the panel is mounted clear of tree shade.
Sizing the Operator to the Gate
The most expensive mistake on a Hurst installation is undersizing the operator. A 16-foot farm gate weighs a lot more than a 10-foot driveway gate, and clay that swells adds load. We measure panel weight before recommending a unit, and we quote the specific model in writing.
Trusted Brands We Service in Hurst
Our technicians are factory-trained on the equipment families actually own on Hurst properties, including Linear, Viking, and Ghost Controls. We stock common parts for these brands locally so a new install or a replacement opener does not wait on a parts shipment from out of state. If your existing gate has a specific operator and you want to keep that brand, we will match it where it makes sense and tell you honestly when it does not.
Common Gate Installation Problems We See in Hurst Homes
- Clay-cycle post heaving: Spring saturation and summer drought push hinge posts out of plumb. A new wide gate will rack and bind at the latch within a season, even when the panel and hardware are brand new, if the footing was not designed for the soil.
- Original 4×4 posts in shallow footings: Many Hurst ranch homes built in the 1960s and 70s still have their original redwood or cedar posts set only 18 to 24 inches deep. Replace the gate on top of those posts and you will be re-racking it within a year. The footing and post need replacing, not just the panel and hinges.
- Undersized power on rural entrances: Longer driveways east and northeast of Hurst create voltage drop over long cable runs. Undersized wire or a weak operator leaves the gate sluggish or dead. Solar retrofit or a properly sized low-voltage run solves this before the gate is hung.
- Ice-storm ground pressure: Frozen saturated clay expands laterally and pops posts out of alignment overnight. Hurst gate repair calls spike after ice events, and the damage is usually at the post line, not from ice impact on the panel itself. We check plumb before recommending any fix.
Pricing for Gate Installation in Hurst, TX
A new pedestrian gate in Hurst runs $1,400 to $3,200. A driveway swing gate typically lands between $2,400 and $5,500. A wide slide gate for an acreage entrance runs $2,200 to $6,800, and a quality operator adds $1,100 to $3,400. What moves the cost in Hurst specifically is the footing work: if we are replacing a 40-year-old 4×4 post that has heaved out of plumb, that involves digging, new concrete, and often a deeper, wider hole than the original builder used. The written estimate you get before work starts breaks this out line by line. We agree on the price before anything is touched, and the number on your estimate is the number on your invoice.
We Also Serve Cities Near Hurst
Our Hurst customers often ask us to help family and neighbors in the surrounding area. We provide the same Gate Installation service in North Richland Hills, Bedford, Colleyville, and Haltom City. Whether the job is a new farm slide gate or a solar opener retrofit, the same written-price promise and 365-Day Done Right Promise apply.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Hurst
Yes, and in Hurst solar is often the better financial choice when the gate sits more than about 60 feet from a power source, because trenching through clay and roots runs $18 to $30 per foot before you even pay for the wire or the electrician. A correctly sized solar opener with a dedicated panel and battery handles a wide gate through North Texas weather, provided the panel gets a few hours of direct sun. Call (626) 649-4572 and we will measure the gate and confirm if solar is right for your specific setup.
Because the post is moving, not the hardware. Hurst’s Blackland Prairie clay swells after spring storms and shrinks in summer, and the post shifts with the soil. New hinges on a leaning post will bind and bend within months. The fix starts with confirming the post is out of plumb and then re-setting it on a deeper footing sized for clay movement. After that, the gate stays true because the foundation finally matches the ground it sits in.
Probably not the ice itself. What usually happens in Hurst after an ice event is that frozen, saturated clay expands laterally and pops the gate post out of alignment overnight, even with no impact damage at all. The panel and hinges then bind because the geometry changed by a half inch or more. We check post plumb first on every post-storm call, because that tells us whether this is a hardware fix or a footing fix. If it will not close today, call (626) 649-4572 and we will get someone out.
If the opening is wider than about 14 feet, or the ground in front of the gate slopes or swells seasonally, a slide gate is almost always the better long-term choice for a Hurst property. Swing gates that wide need a lot of clear arc space and they fight the heaving soil at the hinge post. A slide gate on a self-supporting track carries its own weight and ignores clay movement better. We will measure the opening and tell you honestly which design fits.
New automatic gate installations must comply with UL 325, which means photo eyes across the gate opening, obstruction detection built into the operator, and proper warning signage posted on both sides. On a Hurst install we include these as standard equipment, not upgrades, and we test the reversal system before we finish. The written estimate lists every safety component so you see exactly what is going on your gate.
If you need gate installation in Hurst, call (626) 649-4572 for a free, written estimate. We will measure the opening, check the post footings, and give you a price before any work starts.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Hurst since 2009.