Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across North Richland Hills
Gate installation in North Richland Hills typically runs between $1,800 and $6,500 for a new driveway gate with operator, and $450 to $1,300 for a pedestrian walk gate, depending on width, material, and whether we’re retrofitting existing posts or setting new ones. Most installations in North Richland Hills are completed within one to three days once materials arrive. We work in this city every week, from the HOA communities along Davis Boulevard to the neighborhoods around Iron Horse and Hometown NRH, so we know what holds up here and what doesn’t. Call (626) 649-4572 and we’ll give you a written price before any work starts.
Why Latch & Post Gate Repair Is North Richland Hills’s Preferred Gate Installation Company
We focus on one thing: gates. Every gate comes down to two parts, the latch that holds it and the post that carries it. That’s the job we focus on, and it’s why our Gate Installation team knows the specific failures of North Richland Hills homes better than a general contractor ever could.
North Richland Hills homeowners call us because we’re honest about what needs replacing and what doesn’t. We won’t sell you a new gate when a post reset and new hinges will fix the problem. We also leave your property the way we found it, a written price comes first, shoe covers and drop cloths go down before we step inside, and you get a photo of the clean-up before we leave. That’s the Cedarwell Care Promise, and it’s not an upsell. It’s how we’ve done the job since Latch & Post became part of the Cedarwell family in 2009.
We answer the phone around the clock. A live person takes your call at (626) 649-4572, nights and weekends included. No voicemail queue. When a gate won’t close and your dog is standing at the opening, that matters.
Led by Cody Beckman, our background-checked, uniformed technicians are factory-trained on the brands common to this area and we stock many parts locally for North Richland Hills customers.
Sliding Gate Installation in North Richland Hills
Sliding Gate Installation on a North Richland Hills home usually runs $2,400 to $6,500, with the final number driven by gate width, whether we’re adding an operator, and whether the concrete pad needs prep work. Sliding gates are the right answer here when a driveway slopes up from the street or when a swing gate would arc into a parked car or a fence line. In older North Richland Hills subdivisions, where lots are modest and setbacks are tight, a slide gate saves the space a swing gate would need.
Retrofitting an Existing Sliding Gate
If you already have a slide gate but the track is worn or the rollers are shot, we can often rebuild the rolling hardware without replacing the whole gate. That work typically runs $900 to $2,200. We’ll inspect the concrete track bed, set new rollers, and square the gate frame before rehanging it.
New Slide Gate With Operator
A full installation includes the gate frame, track system, operator, safety photocells, and all wiring to your panel. We pull any required local permits and schedule with your HOA if needed. You’ll see the exact line-item price in writing before we order a single part.
Gate Opener Installation in North Richland Hills
Gate Opener Installation on a North Richland Hills property typically runs $1,100 to $3,400, depending on whether it’s a swing or slide gate and whether the existing control board can be reused. This is the job we’re doing most often in this city right now. The automated entry gates installed during the late-1990s and early-2000s HOA buildout around Iron Horse and Hometown NRH commonly used LiftMaster and Viking operators that are now past their rated cycle life.
Operator Replacement on an Existing Gate
We remove the old motor, mount the new operator, wire in safety photocells and edge sensors, and set the open/close limits. The job usually takes half a day. If the old mounting plate is compatible, we reuse it; if not, we fabricate a new one on site.
First-Time Automation for a Manual Gate
If your gate swings by hand and you’re ready to automate it, we run the power from your panel to the gate post, install the operator arm or slide motor, and add the entrapment protection UL 325 requires. On Tarrant County clay, we pay extra attention to post stability before mounting anything, a wobbly post will shorten any operator’s life.
Trusted Brands We Service in North Richland Hills
Our technicians are factory-trained on the brands common to this exact market. In North Richland Hills we work on FAAC and BFT swing operators, Linear slide motors, and the Viking units that are still running on older HOA entry gates. We stock common control boards, remote transmitters, and safety edge parts for these brands locally, which means faster turnaround when a board fails and your gate is stuck open. We’ll also quote a retrofit path if your current brand has been discontinued, rather than leaving you with a dead-end operator you can’t get parts for.
Common Gate Installation Problems We See in North Richland Hills Homes
- Heaving posts from Blackland Prairie clay. North Richland Hills sits on expansive clay that shrinks in summer drought and swells with fall rain. That movement tilts gate posts, throws hinges out of plumb, and makes latches bind or fail to close flush.
- Obsolete control boards on 1990s-2000s HOA gates. Original LiftMaster and Viking boards installed across whole subdivisions are failing now in the same window. We can often replace the board, but if the motor is also worn past its rated cycle life, replacement is the cheaper answer.
- Pre-UL 325 operators without safety photocells. Legacy automated gates installed before modern entrapment protection requirements often lack working edge sensors or photocells. We always correct this during installation, it’s a family safety issue, not an option.
- Wooden walk gates hung before modern hardware existed. The 1980s and 1990s side-yard gates common across North Richland Hills were often hung on lightweight hinges that sag over time. We reframe the opening and rehang with heavy-duty hardware when we install a new gate.
Pricing for Gate Installation in North Richland Hills, TX
A standard pedestrian walk gate in North Richland Hills runs $450 to $1,300. A new steel or ornamental iron driveway swing gate starts around $1,800 and goes to $4,500. Sliding gates run $2,400 to $6,500, including the track and operator when ordered together. Adding automation to an existing gate falls between $1,100 and $3,400. The biggest cost drivers are gate width, material choice, whether we’re setting new posts in clay soil, and whether your HOA requires a specific design or finish. You’ll always receive a written price before work begins, and that price doesn’t change unless you add scope. We quote, you approve, then we order. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near North Richland Hills
We regularly install gates just beyond North Richland Hills in Hurst, Haltom City, Bedford, and Colleyville. If you’re in one of those cities, Gate Installation in North Richland Hills is the same crew and the same Care Promise, just a few minutes down the road.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in North Richland Hills
Usually just the motor and control board. Most HOA entry gates in North Richland Hills were installed with steel posts and frames that outlast the operator by a wide margin. We replace the motor, board, and safety sensors on a healthy gate for $1,200 to $2,800. We’ll tell you honestly if the gate frame itself is too far gone, which happens when the post footings have heaved and the frame has twisted. Call (626) 649-4572 and we’ll assess it on site, the quote is free.
Because the city’s residential buildout happened in one concentrated window. The master-planned communities developed along Davis Boulevard between the late 1980s and early 2000s used the same LiftMaster and Viking operators across entire subdivisions. Those operators had similar rated cycle lives, so they’re reaching end-of-life together. One failed motor call in a gated community often turns into several neighbors requesting quotes the same week.
North Richland Hills sits on expansive clay that moves more than most homeowners realize. During summer drought the clay shrinks and pulls away from post footings; after fall rain it swells and pushes upward. That cycle tilts posts, which binds operators and throws swing gates out of alignment. We set gate posts deeper than minimum code, use concrete that holds in clay, and often add a steel post insert. It’s the difference between a gate that stays square for years and one that needs rehinging every spring.
If the gate was automated before roughly 2016, it may not. Older installations in North Richland Hills often lack the working photocells and edge sensors UL 325 now requires, and disconnected safety devices are a serious risk for kids and pets. During any installation or operator replacement we bring the gate up to current UL 325 standards. We’ll point out exactly what’s missing and quote the correction in writing.
If the operator is under 8 years old and the board is the only failure, repair is usually cheaper, typically $400 to $900. Beyond 10 to 12 years, or if the motor itself is failing, replacement is the honest recommendation at $1,200 to $2,800 installed. We’ll show you the repair cost and the replacement cost side by side, and let you decide without pressure. Call (626) 649-4572 for a straight answer on your specific gate.
Call Latch & Post Gate Repair in North Richland Hills
We know the gates in this city, the ones built in the 1990s along the Iron Horse corridor, the HOA entry gates with Viking operators, and the side-yard wooden gates that have been sagging for a decade. We’ll give you a written price, protect your floors and your quiet hours while we work, and back the installation with the 365-Day Done Right Promise. If it’s not right, we make it right, no argument. Call (626) 649-4572 for a free estimate.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving North Richland Hills and surrounding Tarrant County communities.