Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Bedford
Gate installation in Bedford almost always means replacing something that has been standing since the Reagan administration. We are talking 30 to 50 year old cedar posts, swing gates hung in the 1980s, and operators with control boards that are no longer made. A new driveway gate here in Bedford typically runs $1,800 to $4,200 for a standard single swing, and $3,500 to $7,500 for a sliding gate, depending on whether we are resetting posts, adding automation, or working with an existing fence line. We quote the full number in writing before any work starts, and we answer the phone live at (626) 649-4572 any hour, any day.
Why Latch & Post Gate Repair Is Bedford’s Preferred Gate Installation Company
Our crews know Bedford not as a dot on a map but as a series of specific neighborhoods: Bedford Oaks, Shady Brook, Stonegate, and the winding streets off Cummings Drive and Harwood Road. We have pulled cedar posts in this town that looked fine above the soil line and were hollow three inches below it. That local pattern, repeated across hundreds of Bedford homes, is not something a general handyman learns from a checklist. It affects how we bid, how we set footings, and what we warn you about before we start.
Bedford homeowners call us because the technician who shows up is background-checked, wears a uniform, and follows the Cedarwell C.A.R.E. values on every visit: clean up like it is our own home, ask before we move or touch anything, respect your time and quiet hours, and explain the price before the work. We lay drop cloths on the floor and put on shoe covers before we step inside your entryway, garage, or control panel room. Before we leave, we photograph the cleaned work area. It is part of every job, not an extra line item.
Cody Beckman runs our gate installation and repair team with the same standard he set when Latch & Post joined the Cedarwell family in 2009: if a gate is not right, we come back and make it right under the 365-Day Done Right Promise. No argument, no fine print. That is the promise behind every Bedford install we complete.
Driveway Gate Installation in Bedford
Driveway Gate Installation in Bedford is rarely a brand-new fence line. It is usually a like-for-like replacement on an existing swing gate whose original cedar hinge post has been heaved out of plumb by Tarrant County’s shrink-swell black clay over three to five decades. A standard single driveway swing gate replacement in Bedford, including a new post, new hinges, and basic steel or aluminum frame, runs $1,800 to $3,400 without automation. Adding a modern operator pushes the total to $3,200 to $4,800, installed and programmed.
Post Reset and New Footings
When we hang a driveway gate on a post that has moved, the new gate inherits the old problem. In Bedford, that means we pull the original cedar post, dig a deeper hole, set a new pressure-treated or steel post in concrete, and only then do we mount the gate. This is the part of the job most quotes skip, and it is the part that determines whether the gate still closes square in three years.
Automation Retrofit vs. Full Replacement
If your 1980s or 1990s driveway gate was never automated, or had an operator that has since died, we can often retrofit a new arm or swing operator onto a sound frame. Bedford homeowners with straight posts and solid hinges get a clean retrofit for $1,000 to $1,800 on top of the gate itself. If the frame is sagging or the post is soft, retrofitting is throwing money into a hole. We will tell you which one applies to your gate before you spend a dollar.
Sliding Gate Installation in Bedford
Sliding Gate Installation in Bedford suits the many homes here with shorter driveway setbacks or gates that swing out over a sloped apron. Bedford’s fully built-out neighborhoods rarely have room for a grand swing arc, so many homeowners off Harwood Road and near Central Drive convert a tired swing gate to a cantilever or track slide system. A basic chain-link or aluminum sliding gate in Bedford starts around $2,400 and a heavier steel slide gate with rack-and-pinion track runs $3,500 to $7,500, including the operator.
Converting a Swing Gate to a Slide
On homes where a 1970s wrought-iron swing gate has finally outlived its posts, a slide conversion often makes more sense than rebuilding the swing. The gate rolls along a track instead of hanging on a hinge post, which means the clay-driven post heave that plagues Bedford swing gates stops being the point of failure. We price this honestly: a slide conversion can cost $400 to $1,000 more than a like-for-like swing replacement, but it can save two post resets over the next decade.
Track Options for Bedford Soils
Bedford’s black clay moves every season, and that movement will crack a poorly prepared track foundation. We pour a continuous reinforced concrete pad for track systems, or we use a V-track and wheel assembly for cantilever gates where the ground is too active for a full track. The choice depends on your driveway’s slope and drainage, which we check during the free measure.
Trusted Brands We Service in Bedford
Our technicians are factory-trained on the gate equipment Bedford families actually have bolted to their posts: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The brands that come up most in Bedford are DoorKing on older 1990s swing and slide operators, Elite on mid-2000s replacements, and Ghost Controls on newer retrofit arms. We keep common DoorKing limit switches, Ghost Controls arms, and FAAC photocells in local stock so a Bedford stop does not turn into a two-week parts wait. When we install, we program the operator on site, test every safety edge and photocell, and walk you through the remotes before we leave.
Common Gate Installation Problems We See in Bedford Homes
- Hollow cedar hinge posts. In Bedford’s 1980s subdivisions, original cedar gate posts wicked up clay moisture for decades and rotted at the soil line. What looks like a simple hinge adjustment is usually a full post-pull-and-reset once we dig down and find the post hollow at grade.
- Obsolete operator control boards. Legacy LiftMaster, FAAC, and BFT gate operators installed in the 1990s are no longer serviceable, and without UL 325 entrapment protection they fail current safety standards. Replacement is often cheaper than hunting for a discontinued board.
- Clay-driven post heave. Tarrant County’s black clay shrinks during Bedford’s routine 100°F+ summer stretches and swells after spring rains, cycling gate posts out of plumb season after season. A gate that dragged in July and swung free in April is a classic Bedford clay symptom.
- Freeze-seized motors and cracked welds. Hard freezes like the February 2021 storm that hit the Mid-Cities hard crack welds and seize automated gate motors. We are still seeing deferred damage from that event years later, mostly on older steel swing frames.
Pricing for Gate Installation in Bedford, TX
Here is what Bedford homeowners can expect to pay. A basic single swing gate replacement without automation: $1,800 to $3,400. A slide gate conversion with operator: $3,500 to $7,500. Adding a modern operator to an existing sound gate: $1,000 to $1,800. A full post-pull-and-reset with new concrete footing: $400 to $900 per post. The two things that move the number most in Bedford are the condition of the posts and whether the old operator needs full replacement. You get the exact price in writing before we start, and the price is agreed before any work begins. A free measure and estimate are part of every visit. Call (626) 649-4572 to schedule one.
We Also Serve Cities Near Bedford
Our Bedford crew runs the same gate installation routes into Colleyville, Euless, Hurst, and North Richland Hills. If you are a few minutes outside Bedford, call us and we will schedule a free measure. The post rot and clay heave patterns are the same Tarrant County story, and we stock parts for all of it locally.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Bedford
In Bedford, sagging usually means the post has rotted at grade, not that the hinges are loose. We can do a quick hinge adjustment for $120 to $200 if the post is still sound, but on 1980s cedar posts we almost always find the wood hollow below the soil line, which means a full post-pull-and-reset at $400 to $900. Call us at (626) 649-4572 and we will dig down and tell you which one you have before we quote.
Replace it. The 1990s LiftMaster boards are discontinued, and even a used board is a short-term fix on a 30-year-old motor. A new operator with current UL 325 entrapment protection runs $1,000 to $1,800 installed in Bedford, and it comes with a current warranty. Rebuilding a dead board can cost $600 to $900 and leaves you with an old motor and no safety edge compliance. Call for a free on-site look and a written price.
Yes, and most Bedford installs are exactly that: a new gate hung on an existing fence line where the old gate has failed. The catch is the fence posts on either side, which are often as old as the gate. We inspect the posts during the free measure and tell you if we can use them or if we need to set new ones. You will see that in the written quote before any work starts.
Bedford does not require a city permit for a like-for-like gate replacement on a single-family home, but if we are running a new electrical line or adding an automatic operator, the work must meet current UL 325 safety standards for entrapment protection. We handle the electrical side to code and document the safety edge and photocell tests for you. If your project needs a permit, we tell you during the measure, not after the work starts.
Bedford’s housing stock was almost fully built out between the 1970s and early 1990s, so the gates here have been standing on Tarrant County’s shrink-swell black clay for 30 to 50 years. That clay heaves posts out of plumb every drought and rainy season. Newer suburbs have younger posts and often different soil prep. In Bedford, the failure is structural and age-driven, which is why most of what we do here is replacement, not fresh installation. Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on.
Ready to get a straight answer and a written price? Call Latch & Post Gate Repair at (626) 649-4572 for a free estimate. We serve Bedford with live-person answers around the clock, and every install is covered by the 365-Day Done Right Promise.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Bedford and the Mid-Cities with gate installation and repair since 2009.