Latch & Post Gate Repair gate repair team

Gate Company in Hurst - On-Site in 60 Minutes, Fixed the Same Day

Same-day gate service with the price agreed before we start. Licensed and insured engineers covering repairs, operators and access control across the whole area.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Call Now - 24/7 Dispatch

We answer around the clock

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Gate Company in Hurst, TX

Latch & Post Gate Repair is a Hurst gate company focused on one trade: gates that latch, swing, and close the way they should. Most Hurst homes were built between the 1950s and 1980s, and many original wood privacy gates are now 40 to 60 years old, set on shallow 4×4 posts that predate modern installation standards. Combine that with North Texas Blackland Prairie clay that swells and shrinks through every wet spring and dry summer, and you get posts that lean, frames that rack, and latches that stop lining up. Our crews work on those failures every week. Call (626) 649-4572 and a live person answers, any hour.

Call (626) 649-4572

Why Hurst Homes Are Different

Hurst sits on expansive clay that moves. After spring thunderstorms, the ground swells and pushes gate posts out of plumb. During triple-digit summer droughts, the same clay contracts and pulls footings the other direction. A gate that closed cleanly in March can drag across the ground by July, then bind against the latch post in October. That shrink-swell cycle is the dominant cause of gate failure in Hurst, and it means repairs here usually start at the footing, not at the hinge.

The housing stock makes it worse. Hurst’s post-war ranch homes often still carry their original gate installations: 4×4 posts set in shallow concrete, hardware that has seen 60 years of rain, heat, and ground movement. By the time a homeowner calls us, the frame is typically racked, one post is leaning, and the hardware has seized. A new latch on a post that is 3 inches out of plumb will fail within months. That is why our Hurst technicians check post plumb and footing integrity before touching any hardware. Ice events, like February 2021, add another wrinkle: frozen, saturated clay expands laterally and can pop a stressed post out of alignment overnight. After a North Texas ice storm, we see calls spike not from ice damage, but from posts that moved while the ground was frozen.

Our Main Hurst Services

Most Hurst homeowners reach out for one of three reasons: a gate that will not latch, a gate that needs full replacement, or an electric opener that quit. Each service has its own dedicated Hurst page below.

Gate Repair in Hurst

A sagging or stuck gate in Hurst is rarely just a hinge problem. The clay underneath the posts has usually moved, and that movement transfers into the frame, the latch alignment, and the hinge stress. We start with post plumb and footing condition, then work outward to hinges, latch hardware, and frame square. The repair plan is written down and priced before any work begins. For the full scope of what we fix, see Gate Repair in Hurst.

Gate Repair in Hurst

Gate Installation in Hurst

New gate installation on Hurst’s clay requires footings that reach below the active shrink-swell zone, and posts that are set to stay plumb through wet and dry cycles. We size the post depth and concrete mass to the gate’s weight and width, then build the frame square so the latch lines up on day one and stays that way. Wood privacy gates, steel driveway gates, and full post-and-panel replacements are all in scope. Details are on Gate Installation in Hurst.

Gate Installation in Hurst

Electric Gate Repair in Hurst

An opener that hums but will not move, a remote that stopped working, a gate that reverses mid-cycle: these are the calls we field on Hurst driveway gates every week. We service control boards, arms, photo eyes, safety edges, and remotes, and we work on the brands families around here actually own: Linear, Viking, Ghost Controls, DoorKing, and more. Same-day repair is often possible. Read more on Electric Gate Repair in Hurst.

Electric Gate Repair in Hurst
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (626) 649-4572

What happens when you call

  1. 1
    A real person answersNo phone trees - you reach a local pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched.
  3. 3
    A background-checked tech heads outLicensed & insured, dispatched right away.
  4. 4
    You approve before work beginsNothing starts until you say go.

Brands We Service in Hurst

Our Hurst technicians are factory-trained on the operators and hardware families we see most in local driveways and backyards: Linear, Viking, Ghost Controls, and DoorKing, plus FAAC, BFT, LiftMaster, Elite, and Mighty Mule. We keep common boards, arms, and remotes stocked locally so most electric gate repairs finish in a single visit. A wider overview is on our brands page.

Pricing for Gate Company in Hurst, TX

Service Typical range in Hurst
Gate latch replacement $120 – $260
Hinge replacement (pair) $140 – $300
Post reset or replacement $280 – $650
Gate frame racking repair $180 – $420
Wood privacy gate installation $450 – $1,100
Steel driveway gate installation $1,800 – $4,500
Electric opener replacement (residential) $650 – $1,500
Control board replacement $220 – $520
Safety sensor or photo eye replacement $130 – $280
Remote or keypad programming $60 – $140

What pushes a Hurst price toward the upper end of a range is usually the soil: a post that needs a deeper, wider footing to hold against clay movement costs more than a simple hardware swap. You will see the exact number in writing before we touch anything, and that written price is what you pay. No surprise line items, no pressure to approve extras on the spot.

Neighborhoods We Serve in Hurst

We work throughout Hurst, including the older ranch-home neighborhoods where original gates and clay footings are most common. Typical response for gate repair calls in Hurst is same day or next day, depending on the season and when you call.

  • Hurstview Hills
  • Mayfair
  • Shady Oaks
  • Bellaire Park
  • Richland Terrace

Service Area – Cities Near Hurst

Beyond Hurst, our crews serve the neighboring communities where homeowners deal with the same Blackland Prairie clay and aging gate stock. We regularly dispatch to North Richland Hills, TX, Bedford, TX, Colleyville, TX, and Haltom City, TX.

Serving Hurst, TX - Our Local Coverage Area

We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs About Gate Company in Hurst

Ready to get started? Free estimates · within the hour response in Hurst
Call (626) 649-4572

What happens when you call

  1. 1
    A real person answersNo phone trees - talk to a local gate repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Hurst Customers Say

★★★★★ 5.0 from 5+ reviews

"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."

- Ravi Menon

"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."

- Benson Ide

"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."

- Opal Reddick

How It Works in Hurst

Getting your gate repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate repair needs and we provide an upfront, transparent quote - no obligation, no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Hurst - typically within 30-60 minutes, with parts stocked on the truck.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

Current Offers

Bring these savings to your next appointment.

10%

10% Off Your First Service Visit

Valid on your first completed service visit with us.

Expires Mar 31, 2027
Always

Written Price Before Any Work Starts

Expires Mar 31, 2027
Included

Shoe Covers and Drop Cloths on Every Visit

Expires Mar 31, 2027
Included

Photo of the Clean-Up Before We Leave

Expires Mar 31, 2027

Request a Free Estimate

Tell us what's going on in Hurst - we'll get back to you fast. No obligation.

When you submit this form, you accept our Privacy Policy and agree that you may be contacted via phone, email, or SMS about your request, including by the independent contractors we may refer it to.

Prefer to text? Text Now
Call Now - 24/7 Dispatch
Areas We Serve
Call Now - 24/7 Dispatch