Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Yonkers
Gate repair in Yonkers usually costs between $180 and $480 for common fixes like hinge replacement, latch adjustment, or post shimming, and most calls are completed in one visit. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we work on the gates Yonkers actually has: 80-year-old cast iron hung on brick pillars, sliding driveway gates on Park Hill, and automatic operators that salt has worked over for a decade. If your gate is dragging, refusing to latch, or dead at the keypad, call (626) 649-4572 and a live person answers, day or night.
Why Latch & Post Gate Repair Is Yonkers’s Preferred Gate Repair Company
We focus on gates only. Not gutters, not decks, not a handyman’s Wednesday. When a Yonkers homeowner calls us about a sagging iron gate or a dead Viking operator, the technician who shows up works on gates every single week, and has likely fixed the same failure on a house three blocks away. That focus means the right part is on the truck, the right diagnosis happens without guesswork, and the repair is finished before the crew moves on to the next job.
Our technicians work under the Cedarwell C.A.R.E. values: clean up like it’s our own home, ask before we move or touch anything, respect the family’s time and quiet hours, and explain the price before the work. That last part is not a slogan. You get a written price before any work starts, every single visit. No pressure, no “we need a decision today.” And when we’re inside the house to reach a gate operator or control panel, we put on shoe covers and lay drop cloths on the floor first. Your floors stay clean; that’s part of the job, not an upsell.
Every repair and installation we do in Yonkers is covered by the 365-Day Done Right Promise. If the fix isn’t right, Latch & Post makes it right with no argument and no fine print. Dispatch and scheduling are coordinated from our New York City office, and crews serve Yonkers locally.
Iron Gate Repair in Yonkers
Iron gate repair in Yonkers usually means one of three things: a hinge or post that has shifted, a latch that no longer lines up, or rust that has eaten through a section of the frame. On Yonkers’ older grid streets, where pre-war cast-iron gates still hang on original brick or cut-stone pillars, the most common culprit is not the iron itself. It’s the pillar. Decades of freeze-thaw cycles work the footing loose, and the post racks slowly out of plumb until the gate drags the walk or the latch bolt misses the keep by half an inch. A standard iron gate repair in Yonkers runs $180-$380, and if a section of the frame needs to be cut out and replaced, you’re looking at the higher end of that range or slightly beyond. You’ll see the exact number in writing before we touch anything.
Post Reset and Shim on Original Pillars
When a Yonkers iron gate drags in April but worked fine in November, the odds are high the pillar moved. We pull the hinge pins, reset the post footing, shim it level, and re-hang the gate so the reveal is even and the latch catches cleanly. Skipping this step and only adjusting the hinges will last one winter. Maybe two.
Rust Repair and Frame Reinforcement
Road salt brine from Yonkers’ steep hills settles into the bottom rail of iron gates and works from the inside out. We grind out the rot, weld in a new section where the frame is salvageable, and treat the repair so it doesn’t become the next failure point. When the rust has compromised more than a third of the rail, we’ll tell you honestly that replacement is the cheaper answer than another repair season.
Sliding Gate Repair in Yonkers
Sliding gate repair in Yonkers typically involves a gate that has jumped its track, a rack and pinion assembly that has worn out, or an operator that strains and stops halfway. On the city’s steeper properties, especially around Park Hill and the southwest riverfront, a sliding gate carries extra load every time it cycles because the track was never perfectly level to begin with. Add salt brine and Hudson moisture to the rollers and rack, and the assembly fails from the bottom up. Sliding gate repair in Yonkers commonly runs $220-$480, depending on whether we’re resetting the track, replacing a section of rack, or swapping a dead operator. Written price first, always.
Track Realignment and Roller Replacement
When a sliding gate shudders or grinds mid-travel, the track has usually drifted or a roller has seized. We check the full track run with a level, correct any dips or sags, and replace worn rollers with parts rated for salt exposure. Failing to level the track before replacing rollers just sends the new rollers to an early grave.
Rack and Pinion and Operator Rescue
The rack is the toothed bar along the gate, and the pinion is the gear that drives it. Hudson moisture rusts both from the inside out, especially on riverfront blocks. We inspect the rack teeth for wear, replace the damaged section, and make sure the operator is not fighting a gate that’s already failing. Sometimes the operator is fine and the rack was the whole problem.
Trusted Brands We Service in Yonkers
Our technicians are factory-trained on the brands Yonkers families actually have bolted to their gates: Viking, DoorKing, Ghost Controls, Elite, LiftMaster, FAAC, and BFT. That includes operators installed 15 or 20 years ago, some of which are no longer made. We keep common control boards, limit switches, and receiver modules stocked for fast turnaround on Yonkers jobs, so a repair doesn’t stall waiting for a part shipped from a warehouse in another state. If your gate operator is obsolete, we’ll tell you what can honestly be retrofitted and when a new board or a full operator swap is the smarter spend. You can read more about our Gate Repair approach, but the short version is this: we fix what’s fixable and we don’t sell a replacement when a $150 board fixes the problem.
Common Gate Repair Problems We See in Yonkers Homes
- Frost-heaved pillars on Park Hill and the riverfront blocks. A heavy iron swing gate that drags every spring is usually not a broken operator. The brick or bluestone pillar has racked out of plumb after the ground thawed, and the gate is hanging on a post that moved. We reset and shim the post before we touch any hardware.
- Salt brine corroding control boards and operator arms. Yonkers’ steep streets get heavy road salt all winter, and the runoff settles into gate equipment faster than in flat Westchester towns. We open the operator housing expecting corrosion, and usually find it.
- Hudson moisture rusting hinge posts from the inside. Homes along the western waterfront sit alongside the tidal Hudson estuary, and the ambient moisture accelerates rust in ways inland blocks never see. A gate that fails at the post while the panel looks fine is a classic riverfront problem.
- Gates hung 80 to 100 years ago, before modern safety requirements. Yonkers is full of original wrought-iron gates that were never designed for automatic openers, let alone safety photocells. We retrofit where the structure is sound, and we’ll be straight with you when a 90-year-old gate belongs in the recycle pile.
Pricing for Gate Repair in Yonkers, NY
Most gate repairs in Yonkers fall between $180 and $480, and you’ll get the exact number in writing before any work starts. A simple latch alignment or hinge shim tends toward the lower end. Resetting a frost-heaved post, replacing a rack section on a sliding gate, or swapping a corroded control board lands in the $300-$480 range. Full gate replacement on one of the city’s older iron gates is a different conversation, and we’ll help you weigh the cost of one more repair season against a new gate that won’t need attention every spring. Estimates are free. Call (626) 649-4572 and we’ll give you a straight answer on what the fix should cost.
We Also Serve Cities Near Yonkers
Our Gate Repair in Yonkers service area also reaches Mount Vernon, New Rochelle, White Plains, and the Bronx. If you’re a few minutes over the city line, we can still get a technician to your gate, and the same written-price and shoe-covers routine applies no matter the zip code. Call (626) 649-4572 and say where you are.
Serving Yonkers, NY - Our Local Coverage Area
We’re based in the Yonkers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Yonkers
Usually not. On Park Hill, where streets are steep and winters are salty, the most common spring failure is frost heave: the original brick or bluestone pillar shifts a few inches out of plumb after the ground thaws, and the gate hangs low enough to drag. The operator is often completely fine. We were called out on Park Hill for a cast-iron swing gate that had dragged all winter and finally jammed a LiftMaster operator mid-travel. Before touching the operator, we pulled the pins and found the original brick pillar had shifted about three inches out of plumb, so we reset and shimmed the post footing, re-hung the gate, and did a sag correction on the hinge post. The gate has run clean through two salt seasons since. Call (626) 649-4572 if yours is doing the same thing, and we’ll diagnose the post before we blame the motor.
It can, yes. Yonkers operates under its own municipal building codes through the Yonkers Building Department, not NYC’s and not Westchester’s. Structural work on a gate pillar, especially resetting a footing in masonry that’s 80-plus years old, may require a local permit that contractors from outside the city don’t routinely pull. We’re familiar with Yonkers’ permitting process and can tell you early in the job whether yours needs paperwork. For a straight answer on your specific gate, call (626) 649-4572.
Because your gate sits next to the tidal Hudson estuary, and the ambient moisture along the western waterfront is significantly higher than it is inland. Add road salt brine from Yonkers’ hilly streets, and the metal components, especially hinge posts and rack and pinion assemblies, rust from the inside out. Your cousin’s gate in northern Westchester deals with salt, but not the Hudson humidity. For a repair that accounts for both, call (626) 649-4572.
In many cases, yes. If the post footing is sound and the gate hinge structure is straight, we can retrofit a new LiftMaster or FAAC operator onto an existing gate, including one that has been around for decades. The exceptions are gates where the frame has rusted through in multiple sections or the posts have racked so badly that shimming would only buy a season. We’ll inspect the whole gate before recommending retrofitting or replacement, and you’ll get a written price for either option. Call (626) 649-4572.
Yes, and this is not optional. Any automatic gate should have working safety photocells and proper force settings so the gate stops and reverses if it meets an obstruction while closing. Many Yonkers gates predate modern safety standards, and if yours lacks a photocell or has one that has failed, we’ll recommend installing or replacing it as part of any operator service. Safety edges and photocells protect kids, pets, and anyone on the sidewalk. Call (626) 649-4572 if you’re not sure whether your gate’s safety system is current.
If your gate is dragging on Park Hill, rusting by the river, or dead at the keypad anywhere in Yonkers, call (626) 649-4572. A live person answers around the clock, and your estimate is free. Every job comes with a written price before work starts, shoe covers and drop cloths when we step inside, and the 365-Day Done Right Promise.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Yonkers and nearby Westchester communities since 2009 as part of the Cedarwell family.