Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across White Plains
Gate repair in White Plains typically costs between $180 and $340 for a standard latch, hinge, or alignment fix, and most residential jobs can be scheduled within one to two business days. If your gate sags, drags on the concrete, or won’t open at all, call Latch & Post at (626) 649-4572 and we’ll give you a written price before anything gets touched. We serve every neighborhood in White Plains, from the estate-era streets of Gedney Farm to the condominium towers downtown, and we know exactly what the freeze-thaw cycle does to gate posts in this part of Westchester County.
What makes White Plains different from White Plains neighbors like Scarsdale or Harrison is the mix. Our Gate Repair team gets called to 1930s Tudor homes with ornamental wrought iron swing gates in the morning, then crosses Martine Avenue to work on a commercial barrier arm in the afternoon. That dual demand means our technicians are fluent in both custom ironwork and UL 325-compliant automated operators, which is rare for one gate company.
Every call is answered by a live person, 24 hours a day. Not a voicemail, not a callback queue. When you call (626) 649-4572, you speak with someone who can answer questions about your gate, schedule the visit, and explain exactly what the written price will cover.
Why Latch & Post Gate Repair Is White Plains’s Preferred Gate Repair Company
We’ve worked on enough White Plains gates to know the local housing stock inside out: 1920s-1950s Tudors and Colonials in Fisher Hill and Gedney Farm with original ironwork, postwar split-levels in the Highlands, and newer high-rise condominiums downtown with automated garage and pedestrian gates. Each property type fails differently, and we treat each one with the same care routine on every visit: shoe covers on before we step inside, drop cloths laid on floors, and a photo of the clean-up before our technician leaves. That’s the Cedarwell C.A.R.E. standard, and it’s included, not an upsell.
Our technicians are background-checked, uniformed, and factory-trained on the brands White Plains homeowners actually own: LiftMaster, FAAC, Linear, Viking, Ghost Controls, DoorKing, and more. We carry local parts stock for common White Plains failures, which means fewer return trips and a faster fix on the first visit.
Every repair and installation is covered by the 365-Day Done Right Promise. If it isn’t right, we make it right. No argument, no fine print. That guarantee is why White Plains customers keep our number in their phones.
Driveway Gate Repair in White Plains
Driveway gate repair in White Plains usually costs between $180 and $340 for a hinge or latch fix, and between $300 and $650 when the operator or control board is involved. The specific number is always in writing before we start, so you’ll never face an invoice that’s bigger than the quote.
White Plains’s freeze-thaw cycle is hard on driveway gates. Frost penetrates 24 to 36 inches deep through Westchester winters, and repeated thaw-refreeze events push hinge posts out of plumb. When that happens, the gate panel sags, drags on the driveway, and throws the automated operator out of alignment. This is the most common failure we repair in estate-era homes.
Hinge and Post Realignment
When a post has shifted, align the hinges and everything still binds. We re-set the post to proper depth, often re-pouring the footing so it sits below frost penetration, then re-align the hinges. For most gates, this costs $180 to $340, including the written price before work starts.
Operator Repair and Retrofit
Legacy LiftMaster and FAAC operators from the 1990s often fail because the control board becomes obsolete and burns out without warning. On a driveway in White Plains, that leaves you parked on the wrong side. We can often retrofit the existing operator with a modern board and safety sensors rather than replacing the whole unit, which is usually the more cost-effective answer.
Gate Welding in White Plains
Gate welding in White Plains typically runs $250 to $600, depending on the number of failed joints and whether we’re fabricating replacement hinge plates or simply re-welding what’s there. Estate-era ornamental iron gates in Gedney Farm and Fisher Hill frequently need this work after decades of frost heave and rust.
A sagging ornamental gate often fails at the hinge side, not in the middle of the panel. The weight of the gate combined with post movement causes stress that eventually breaks welds or severs thin iron sections. We cut out the compromised metal, fabricate new material to match, and weld it back so the gate swings clean.
Rust Repair on Ornamental Iron
Rust on a gate isn’t just cosmetic. When joints rust through, the structure weakens and the gate sags further. We grind back the affected areas, weld in new material, and apply a protective finish. In White Plains’s freeze-thaw climate, this repair typically costs $250 to $500, and the written price covers all fabrication and finishing.
Custom Weld Reinforcement
Sometimes the original iron was too thin for the load, or the design created a weak point. We add plate steel or additional gussets to reinforce the structure without changing how the gate looks. For older gates in White Plains, this is often cheaper than a full replacement and keeps the original character intact.
Trusted Brands We Service in White Plains
We’re factory-trained on the brands White Plains homes and commercial properties actually operate: Linear, Viking, Ghost Controls, DoorKing, plus LiftMaster, FAAC, BFT, Elite, and Mighty Mule. Because we stock local parts for these systems and know which discontinued control boards can be replaced with a retrofit, the right fix often happens on the first visit. If you’re not sure what brand your gate operator is, call (626) 649-4572 and we’ll help you identify it over the phone while you stand next to the unit.
Common Gate Repair Problems We See in White Plains Homes
- Sagging ornamental iron gates on Gedney Farm and Fisher Hill estates. These gates are often 60 to 100 years old. Rust-welded hinge joints and post movement from freeze-thaw heave cause the panel to drag on the concrete, and welding is needed more often than a simple part swap.
- Dead operators with discontinued control boards. Legacy LiftMaster and FAAC boards from the 1990s fail without warning and leave the gate stuck open or dead in the driveway. Retrofit boards are usually available, and often cheaper than full operator replacement.
- Loop detector and card-access failures on Martine Avenue commercial gates. Parking structures and office campuses rely on barrier arms that meet commercial uptime standards. When winter post movement knocks the loop detector out of calibration, the gate fails to open on approach, which is a very different repair from a residential swing gate.
- Misaligned automated operators after spring thaw. White Plains frost heave pushes posts out of plumb every few seasons. When spring comes, the operator and gate are out of sync, the panel drags, and safety photocells trip from misalignment. This is why spring is our busiest season in White Plains.
Pricing for Gate Repair in White Plains, NY
Here’s what we charge for common White Plains gate repairs. A standard gate latch replacement runs $120 to $180. Hinge repair or gate realignment typically costs $180 to $340. Welding repair on a rusty or cracked iron gate runs $250 to $600, depending on how many joints need work. Operator or control board repair usually runs $300 to $650. Full gate installations, including posts, hardware, and operator, start around $1,800 and are quoted after a free on-site measure.
Every visit starts with a written price. You’ll see the exact dollar figure before any work begins, and that’s the number on your invoice. No add-ons, no pressure. If you’re comparing White Plains to Yonkers or New Rochelle, our pricing reflects the local market and the cost of carrying parts for the specific brands and gate types common in this area. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near White Plains
Our Gate Repair in White Plains coverage extends to the surrounding Westchester communities. Homeowners in Yonkers, New Rochelle, Mount Vernon, and the Bronx call us for the same written-price, done-right standard. If you’re just across the county line, call (626) 649-4572 and we’ll schedule your visit the same way we handle every White Plains job: clean floors, honest pricing, and a gate that works.
Serving White Plains, NY - Our Local Coverage Area
We’re based in the White Plains area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in White Plains
We can fix most sagging ornamental iron gates, and replacement is rarely necessary. The sag usually comes from hinge-side post movement or failed welds, not from the gate panel itself. We re-set the post to frost depth, re-weld the joints, and the gate swings clean. Repair typically costs $250 to $600, far less than a new ornamental gate. Call (626) 649-4572 for an exact written quote.
Yes, in most cases. Discontinued LiftMaster and FAAC control boards can usually be replaced with a compatible retrofit board that works with the existing motor and arm. This typically costs $300 to $650, which is less than a full operator replacement. We’ll confirm the board model over the phone and give you a written price before we order parts.
White Plains sits in a freeze-thaw cycle that pushes frost 24 to 36 inches deep through the winter. That ground movement shifts gate posts out of plumb, and the misalignment shows up each spring when the gate starts dragging or the operator trips. Fixing the alignment and re-pouring the post footing below frost depth usually solves it permanently, and that repair costs $180 to $340.
Yes, significantly different repairs. Commercial barrier arms along Martine Avenue and in downtown parking structures rely on loop detectors and card-access operators that must meet UL 325 entrapment-protection requirements. When those systems lose calibration after winter post movement, the repair involves re-tuning the electronics and re-aligning the arm, not welding or hinge work. We handle both, which is uncommon for a gate repair company.
We can usually weld-repair it. We grind back the rust, cut out the failed sections, fabricate matching material, and weld it in place. Only when the original iron is too thin throughout do we recommend fabrication of a new panel. In White Plains, welding repair runs $250 to $600. Call (626) 649-4572 and we’ll assess the gate and give you a written price on the spot.
Key Takeaways for White Plains Homeowners
- Most gate repairs in White Plains cost $180 to $340; welding and operator work run $250 to $650.
- The freeze-thaw cycle is the primary reason White Plains gates go out of alignment every spring.
- Legacy LiftMaster and FAAC control boards can often be retrofitted instead of replacing the whole operator.
- Gedney Farm and Fisher Hill estate gates typically need welding and post re-setting, not simple part swaps.
- Commercial barrier gates on Martine Avenue require different expertise than residential swing gates, and we handle both.
Call Latch & Post Gate Repair in White Plains
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, and it’s the work we do across White Plains, from the old estates to the downtown corridor. When you call Latch & Post at (626) 649-4572, you’ll get a live person, a written price, and a technician who puts shoe covers on before touching your floors. We lay drop cloths, we ask before we move anything, and we show you a photo of the clean-up before we leave. That’s how gate repair in White Plains should work.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, part of the Cedarwell family since 2009.