Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Mount Vernon
Gate repair in Mount Vernon usually costs between $185 and $2,400 depending on whether we’re replacing a latch, re-welding an iron panel, or resetting a footing under a sliding gate. Most repairs on this side of Westchester are done the same day we diagnose them, because our crews know the housing stock and come prepared. If your gate drags, binds, sags, or won’t open on the South Side near the Bronx border or up in Fleetwood, call us at (626) 649-4572 and a live person answers. We’re Latch & Post Gate Repair, part of the Cedarwell family, and our only focus is gates.
Why Latch & Post Gate Repair Is Mount Vernon’s Preferred Gate Repair Company
Mount Vernon homeowners call us when a gate has been ignored too long and they need a straight answer, not a sales pitch. We work on the specific problems this city creates: freeze-thaw footings, road-salt rust, narrow rowhouse driveways, and 100-year-old iron that can’t be fixed with a big-box kit. Before any work starts, you get a written price. Before our technician steps inside your home, he puts on shoe covers and lays down drop cloths. Before he leaves, he takes a photo of the clean-up. That’s the Cedarwell C.A.R.E. routine, and it’s included on every visit.
Our Gate Repair team is factory-trained on the brands Mount Vernon families actually have, and the work is backed by the 365-Day Done Right Promise. If it’s not right, we make it right. No argument, no fine print. Cody Beckman, the owner, holds every tech to that standard, and it’s why most of our calls in Mount Vernon come from neighbors who got our number from another neighbor.
Iron Gate Repair in Mount Vernon
Iron Gate Repair in Mount Vernon almost always comes down to weld cracks, hinge wear, or rust pitting on gates that have stood since the Coolidge administration. Much of the housing stock from Fleetwood to the South Side dates from 1890-1950, and the original wrought iron driveway and side-yard gates are still there because they were built to be repaired, not replaced. We re-weld cracked stiles, rebuild hinge barrels, strip and treat rust, and source period-correct hardware that matches the existing pattern instead of slapping on something that looks wrong. A typical wrought iron weld-and-rehang in Mount Vernon runs $280-$650, depending on how many pickets or scrolls need attention.
Weld and rust repair on period gates
When road salt from Mount Vernon’s plowed streets sits on iron through the winter, it pits the surface and eats into hinge posts first. We grind back to clean metal, weld in new material where sections have thinned, and prime and paint to match the gate’s existing finish. If the ornament is too far gone, we can fabricate replacement scrolls or medallions from the original pattern.
Hinge and post repair for sagging gates
A sagging iron gate in Mount Vernon is usually a hinge barrel that’s worn oval, not a gate that’s suddenly too heavy. We rebuild or replace the hinge, then shim the post so the gate swings level and latches without being lifted. Most hinge rebuilds run $185-$340 and take one visit.
Sliding Gate Repair in Mount Vernon
Sliding Gate Repair in Mount Vernon is a specialty that most Westchester gate companies don’t see often, but we see it weekly. On South Side blocks within a few streets of the Bronx border, driveways are so narrow that inward-swing gates were never practical, so 1920s and 1930s rowhouses got sliding or cantilever gates instead. Those gates ride on tracks or cantilever rails that take a beating from freeze-thaw cycles and road salt. When a slide gate grinds, jumps the track, or stops halfway, the fix usually costs $220-$480 for track and bogie work, or $350-$900 when the rack and pinion assembly needs replacement.
Track, bogie, and cantilever repairs
Freeze-thaw heave in Mount Vernon shifts the concrete pad under the track, which throws the gate out of level and makes it bind every few feet of travel. We re-level the track or reset the cantilever post, replace worn bogie wheels, and test the gate across its full travel with the motor disengaged so we can feel exactly where it’s fighting. A track re-level and bogie replacement typically runs $220-$480.
Rack and pinion and operator alignment
When the motor runs but the gate shudders or stalls, the rack and pinion are usually the problem, often because the cantilever track shifted a quarter inch over the winter. We reset the footing, install a new rack section or re-mesh the existing one, and re-aim the safety photocells so the gate stops immediately if a child or pet crosses the path. Rack and pinion replacement on a typical Mount Vernon slide gate runs $350-$900.
Trusted Brands We Service in Mount Vernon
We’re factory-trained on the equipment that’s actually installed on Mount Vernon homes, and our vans carry parts for Linear, Viking, Ghost Controls, and DoorKing systems, among others. That matters here because so many South Side slide gates run on Ghost Controls or Viking operators, while Fleetwood’s larger properties often have Linear or DoorKing swing operators. We keep common boards, remotes, safety edges, and photocells on the truck, so most Mount Vernon repairs are completed the same day rather than waiting on a parts shipment. If your system is older and the part is obsolete, we’ll tell you plainly and give you options that work with what you already have.
Common Gate Repair Problems We See in Mount Vernon Homes
- Freeze-thaw heave on footings. Westchester’s repeated winter freeze-thaw cycles heave and shift the concrete footings anchoring gate posts. Come spring, gates that swung cleanly in October are suddenly dragging on the drive or binding at the latch.
- Road-salt rust on exposed iron. Mount Vernon’s dense street grid gets heavy plowing, and the salt spray coats every gate within a few feet of the curb. Hinge posts, bottom rails, and ornamental details pit and rust noticeably faster here than in the leafier towns to the north.
- Original hardware on 1890-1950 gates. Fleetwood Victorians and South Side two-families still carry their original gate hardware, which means worn hinge pins, broken period latches, and cracked weld joints. Replacement parts aren’t at Home Depot; they come from fabricators or our shop.
- Slide gate failures unique to South Side driveways. Narrow rowhouse driveways mean slide and cantilever gates, and those gates fail in specific ways: bent tracks, worn racks, shifted cantilever posts, and photocells knocked out of alignment by salt and ice.
Pricing for Gate Repair in Mount Vernon, NY
Gate repair in Mount Vernon is priced by the job, not the hour, and you’ll see the exact number in writing before we touch anything. Latch and hinge repairs run $185-$340. Weld repairs and rust treatment on iron gates typically run $280-$650. Slide gate track and bogie work lands at $220-$480, while full rack and pinion replacement runs $350-$900. When we rebuild and resquare a large ornamental gate, the price can climb to $1,200-$2,400 depending on the amount of fabrication and finishing required. Estimates are free, the price we quote is the price you pay, and if we find something unexpected mid-job, we stop and call you before doing anything that changes the number.
We Also Serve Cities Near Mount Vernon
Our Mount Vernon crews regularly cross the border for work in the Mount Vernon area and its neighboring communities. If you’re in New Rochelle, Yonkers, the Bronx, or White Plains, the same C.A.R.E. routine and 365-Day Done Right Promise apply. Call (626) 649-4572 and we’ll schedule you in.
Serving Mount Vernon, NY - Our Local Coverage Area
We’re based in the Mount Vernon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Mount Vernon
Yes, in most cases the grinding comes from the rack and pinion or the bogie wheels, not the motor, so we repair or replace the worn mechanical parts and keep your existing operator. We’ll diagnose it on site, show you exactly what’s worn, and give you a written price before any work starts. Call (626) 649-4572 and we’ll come out to your block, usually the same day.
In Mount Vernon it’s usually a footing problem. Freeze-thaw cycles heave the concrete post footing a quarter to half an inch, which drops or tilts the post enough that the gate scrapes. We reset the post in fresh concrete, re-align the gate, and re-hang the hinges so it clears the ground again. A typical post reset runs a few hundred dollars, and you’ll see the exact figure in writing before we begin.
If the operator was installed before the safety standard changed, it may predate the photo-eye requirement, but any operator we repair or install in Mount Vernon must meet current safety standards. That means safety photo-eyes and edge sensors. When we service an older system, we’ll show you what’s missing and quote you the cost to bring it up to standard. Call (626) 649-4572 for a free evaluation.
We can repair pitted sections unless the rust has eaten through the full thickness of the metal in multiple structural points. We grind the affected areas back to clean steel, weld in new material where needed, treat the surface, and repaint to match the existing finish. If only the decorative sections are rusted while the structural stiles are sound, repair is almost always the cheaper and better choice. We’ll give you a straight answer with a written price before anything is done.
Yes, and it’s one of the more common installations we do in Mount Vernon. We install a track or cantilever system that slides the gate parallel to the driveway instead of swinging into it, which clears narrow rowhouse driveways and steep grades. We’ll measure the driveway, check the setback, and give you a written price for the full conversion including the operator, rack, and safety edges. Call (626) 649-4572 and we’ll come out to measure.
If your gate is dragging, rusted, grinding, or won’t open, call (626) 649-4572. A live person answers 24/7, and the estimate is free. We’re Latch & Post Gate Repair, the Cedarwell family’s gate specialist for Mount Vernon, New Rochelle, Yonkers, the Bronx, and White Plains.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Mount Vernon since 2009.