Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Bedford, TX
Bedford is a fully built-out Mid-Cities suburb where most homes date to the 1970s through early 1990s, and the gate work we do here is almost always repair or replacement of what was originally installed decades ago. The clay soil, the freeze-thaw cycles, and the age of the wood and iron all work against a gate in Bedford. You’ll get a straight answer on what’s failing, what it costs to fix, and a written price before anything is touched. Call us at (626) 649-4572 and a live person answers, day or night.
Why Bedford Homes Are Different
Bedford sits on Tarrant County black clay, a soil that shrinks hard in summer and swells after spring rain. Gates set into it don’t fail all at once – they lean a little more each season until the latch no longer lines up. We see brick-veneer tract homes throughout neighborhoods like Shady Brook, Stonegate, and the streets north of Harwood Road where the original wood privacy fences and swing gates are now 30 to 50 years old. Post rot at the soil line is the single most common finding we report back. The February 2021 freeze also left a mark here: welds cracked, automated motors seized, and some of those repairs are only now surfacing as the hardware ages further. What a homeowner schedules as a hinge adjustment in Bedford often becomes a post pull and reset once we see what’s underground.
Our Main Bedford Services
Two jobs dominate gate work in Bedford: repairing what the clay and time have damaged, and replacing it when repair no longer makes sense. Here’s how each works here, with the full Bedford page linked for each one.
Gate Repair in Bedford
A sagging gate in Bedford is almost never just a hinge. The post below it has usually been worked loose by shrink-swell clay, and the hinge screws are pulling out of a wood post that’s gone soft at grade. We pull the post, inspect what’s left, and reset it properly – or replace it if it’s hollow. Slipped latches, rusted wrought-iron corners, split cedar rails, and cracked welds are all routine. We carry drop cloths and shoe covers on every visit, and you’ll see the cleanup photo before we leave. Details are on the Gate Repair in Bedford page.
Gate Installation in Bedford
When a Bedford gate has reached the end of its life, the replacement needs to match the neighborhood and handle the clay. We install wood, steel, and wrought-iron swing gates with posts set deeper than the original installers typically placed them, which matters in Tarrant County. The conversation starts with a free measure and a written price, and we talk through hardware, hinge placement, and gate weight before any material is ordered. This is not same-day work – it’s measured, scheduled, and done right. See the Gate Installation in Bedford page for the full scope.
Electric Gate Repair in Bedford
Bedford’s electric gate openers sit through the same freeze-thaw and clay movement as every other gate, but they add a control board, a motor, and safety edges to the equation. We service LiftMaster, Viking, Ghost Controls, DoorKing, and the other brands families here actually own. When a motor seizes after a hard freeze or a gear strips, we diagnose it on-site and quote the fix in writing before we start. We also test the safety edges and photo eyes – a gate that reverses when it shouldn’t is a hazard for kids and pets. Full detail on the Electric Gate Repair in Bedford page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Bedford
Bedford’s electric gates run on a mix of openers, and we’re factory-trained on the ones we see most: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Common boards and sensors are stocked locally, so most Bedford repairs complete in one trip. See our brands for the full list.
Pricing for Gate Company in Bedford, TX
| Service | Typical range in Bedford |
|---|---|
| Gate repair (general) | $125 - $450 |
| Wood gate repair | $140 - $360 |
| Wrought iron gate repair | $160 - $420 |
| Hinge replacement | $80 - $180 |
| Post replacement | $140 - $300 |
| Latch replacement | $60 - $140 |
| Automatic gate opener repair | $180 - $480 |
| Gate installation (full) | $800 - $3,000 |
The clay soil in Bedford pushes post work higher than other markets – a post that’s been cycling for decades is usually rotten at grade and needs replacement, not just a reset, which adds time and material. Your written price comes before we start, every visit, no exceptions.
Neighborhoods We Serve in Bedford
We work across all of Bedford – the older subdivisions near Central Drive, the neighborhoods around Shady Brook, Stonegate, and Harwood, and the pockets near Forest Ridge and Meadowbrook. Most Bedford calls fall within the standard service route, so response is typically same-day or next-day for gate repairs.
- Shady Brook
- Stonegate
- Forest Ridge
- Harwood Road area
- Central Drive corridor
Service Area – Cities Near Bedford
Bedford’s location in the heart of the Mid-Cities means we also serve the surrounding communities where the same clay soil and aging housing stock apply. Our gate work extends to Colleyville, TX, Euless, TX, Hurst, TX, and North Richland Hills, TX. Scheduling is coordinated from our Dallas-Fort Worth office, and crews serve Bedford locally.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Bedford
Most Bedford gate repairs are scheduled same-day or next-day, depending on what we find when you call. If a gate is stuck open or a latch has failed entirely, tell the person who answers and we’ll prioritize it. Call (626) 649-4572 for a real time, not an automated estimate.
Bedford requires a permit for new fence and gate construction in most cases, though like-for-like gate repairs typically do not. We can tell you what applies to your specific street and setup before any work starts. If a permit is needed, we handle the paperwork.
Yes. We choose pet-safe lubricants where there’s a choice, we can schedule around nap time if quiet matters, and our technicians wear shoe covers and lay drop cloths inside your home. You’ll see a photo of the cleanup before we leave. Cody Beckman, our owner, set the standard on this; we follow it on every Bedford job.
If your Bedford gate is leaning, dragging, or no longer latching, call (626) 649-4572. A live person answers, and your estimate is free.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bedford Customers Say
"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs