Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Grapevine, TX
Grapevine’s gates live two very different lives. Along SH-121 and International Parkway, heavy commercial swing and slide gates work around the clock for airport logistics, hotels, and freight yards. A few miles west, ornamental iron driveway gates stand at the entrances of custom homes tucked around Grapevine Lake. Both deal with the same relentless Blackland Prairie clay that swells and shrinks beneath every post. We’re Latch & Post Gate Repair, part of the Cedarwell family since 2009, and we handle both sides of that split. If a gate won’t open, sags, or won’t hold, call (626) 649-4572 and a live person will answer.
Why Grapevine Homes Are Different
The soil under Grapevine is the story. Blackland Prairie clay runs beneath most of the metroplex, and it moves more than concrete ever will. A dry July pulls moisture out of the ground, the clay contracts, and a gate post can drop a quarter inch. Then October rains arrive, the clay swells, and the post pushes back up. Repeat that cycle a few times and an automated gate rackes out of square, the operator arm starts fighting the geometry, and the hinges take load they were never designed to carry. We see this pattern constantly in the lake-area neighborhoods where homes were built in the 1990s and early 2000s, and it’s why a simple “gate won’t close” call in Grapevine often turns out to be a post issue rather than an opener issue.
The February 2021 freeze left its own mark. Gates left closed under ice load seized motors, cracked plastic gear sets, and warped frames. Many of those repairs held for a season, but the stress weakened components that are failing now. Add in the mix of mid-century homes near Historic Downtown, where a wooden yard gate might be original to the house, and you get a repair picture that spans everything from a hand-built cedar gate to a keypad-controlled iron entry system. Grapevine isn’t a one-size repair market. The work has to match the house, the era, and the soil under it.
Our Main Grapevine Services
Most Grapevine calls come to us for one of three things: a gate that’s sagging or stuck, a new gate to replace one that’s beyond saving, or an electric opener that’s stopped listening. Each has its own page, written for how that work actually goes here.
Gate Repair in Grapevine
A sagging gate in Grapevine is rarely just a hinge. The post below it has usually moved in the clay, and until that post is set right, any hinge adjustment is temporary. Our repair work starts with checking whether the post is still plumb before we touch hardware. We also look at the latch, the frame racking, and the hinge wear all at once, because a gate that’s been pulling against a shifted post for a year has stressed every part of it. Written price first, shoe covers and drop cloths if the gate is near a finished surface, and we call before we move anything. Details are on the Gate Repair in Grapevine page.
Gate Installation in Grapevine
New gates in Grapevine go into soil that will move. That changes how we set posts: depth matters more here than in sandier ground, and a post set shallow will heave within a couple of Texas seasons. A family investing in an ornamental iron driveway gate off Kimball Avenue or a cedar privacy gate near the lake wants it to close properly five years from now, not just on install day. We quote the full job in writing before any work starts, including how we’re handling the soil conditions on that specific lot. The Gate Installation in Grapevine page walks through how we plan a new gate for this city.
Electric Gate Repair in Grapevine
When an electric gate stops working in Grapevine, we check the operator, the safety edges, the control board, and the gate’s alignment as one system. A gate that’s been racked by soil movement puts the opener in a fight it can’t win: motors overheat, gears strip, control boards fail. That’s why a “motor dead” call here often ends with us realigning the gate and replacing the board rather than just swapping the motor. The brands we work on most around DFW Airport and the lake neighborhoods are FAAC, LiftMaster, and Viking. Full details are on the Electric Gate Repair in Grapevine page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Grapevine
We’re factory-trained on the equipment Grapevine homes and businesses actually run: FAAC, BFT, Linear, Viking, and the rest of the major opener brands. Where a control board or safety edge is needed, we carry common parts on the truck so first-visit fixes happen more often. See our brands for the full list and what each brand tends to need here.
Pricing for Gate Company in Grapevine, TX
| Service | Typical range in Grapevine |
|---|---|
| Gate post re-set (clay heave repair) | $280 - $520 |
| Gate hinge replacement (heavy ornamental gate) | $180 - $340 |
| Gate latch replacement | $130 - $260 |
| Operator arm alignment and adjustment | $160 - $300 |
| Control board replacement (FAAC, Linear, Viking) | $380 - $720 |
| Safety edge replacement | $190 - $360 |
| Gear set replacement (opener) | $220 - $410 |
| Full ornamental iron gate installation | $2,800 - $6,500 |
| Wooden privacy gate installation | $900 - $2,200 |
| Electric gate system install (opener, keypad, edges) | $3,200 - $7,800 |
Clay-driven post movement is the biggest price variable in Grapevine. If the post has heaved, the repair includes more labor and material than a simple hinge swap. Every job gets a written price before work starts, and that number is the number. No surprise line items after the fact, no upsell at the door. The 365-Day Done Right Promise backs what we leave behind.
Neighborhoods We Serve in Grapevine
We run calls across the whole city. Most of our repair work is concentrated in the lake-area neighborhoods and the older streets near Historic Downtown, plus commercial sites along the SH-121 corridor. You’ll usually chat with one of our Dallas-Fort Worth dispatch team immediately, and a Grapevine-area technician can typically reach most homes the same day.
- Historic Downtown and mid-century streets
- Lake-area custom home neighborhoods
- SH-121 and International Parkway commercial corridor
- Grapevine Mills and surrounding developments
- Timberline and the northern residential grids
Service Area – Cities Near Grapevine
Grapevine sits in the middle of a cluster of cities where gate work overlaps a lot. We also serve neighbors in Southlake, TX, Colleyville, TX, Euless, TX, and Coppell, TX. Same crew standards, same written pricing, same live-person answer when you call.
Serving Grapevine, TX - Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Grapevine
Most Grapevine repairs are reached the same day you call. Because dispatch is handled from a dedicated Dallas-Fort Worth office and technicians are already moving through Grapevine daily, the drive time is short. Call (626) 649-4572 and a live person will tell you the realistic window and get you on the schedule.
Many lake-area and custom-home neighborhoods have HOAs that review gate style, height, and materials before installation. We recommend checking your community’s design guidelines before scheduling an install. We’ll provide measurements and specs for your HOA, and the written quote covers what we’re installing and how we’re setting the posts.
Clay movement is a fact of life in Grapevine, but the frequency of repair depends heavily on how the original gate was built. Posts set deep with proper concrete footings and gates hung with well-matched hinges handle heave cycles far better than shallow-set posts. We assess the post condition on every job, not just the visible hardware.
If your gate is sagging, stuck, or the opener won’t respond, call Latch & Post Gate Repair at (626) 649-4572. A live person answers, we’ll schedule the visit, and the written price comes before any work begins. Cody Beckman and the Grapevine-area crew treat your driveway and your floors like they’re ours.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Grapevine Customers Say
"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs