Gate Repair in Grapevine - On-Site in 60 Minutes, Fixed the Same Day

Fast, Reliable Gate Repair Across Grapevine

Gate repair in Grapevine usually costs between $180 and $620 depending on whether we’re fixing a bent hinge, realigning a sagging panel, or replacing an operator motor on an ornamental iron driveway gate. We know Grapevine not just from a map but from the clay soil that moves under the posts, the airport corridor off SH-121, and the lake-area homes where a heavy custom gate has to close quietly every night. If your gate is binding, dragging, or failing to open, call (626) 649-4572 and a live person answers, day or night.

Call (626) 649-4572

Most Grapevine repair calls are finished in one visit. We carry parts for FAAC, Linear, and LiftMaster on the truck, so we don’t have to leave your property unsecured while we order a control board. When weather or a broken weld slows us down, you’ll know exactly what the hold-up is and what it costs before we touch a single bolt.

Why Latch & Post Gate Repair Is Grapevine’s Preferred Gate Repair Company

Since 2009, Latch & Post has worked as part of the Cedarwell family of independently owned gate specialists. The work we do in Grapevine follows one standard: written price first, shoe covers and drop cloths on every visit, and a photo of the clean-up before we leave. That’s the Cedarwell Care Promise. Cody Beckman leads our team, and he holds every technician to it, whether the job is a simple latch swap near Historic Downtown or a full gate installation off Fairway Drive.

Grapevine homeowners tell us the same thing after we leave: they expected the gate to work better, but they were surprised the driveway looked untouched. That’s the point. We lay drop cloths on the floor before carrying tools inside for a keypad repair. We use quiet tools when there’s a baby sleeping. We ask before moving a potted plant or a stroller out of the way. If your gate is around back where the dog runs, we confirm the gate is closed and latched before we pull out of the driveway.

We coordinate Grapevine scheduling and parts from our Dallas-Fort Worth office, so a crew can typically reach neighborhoods around Grapevine Lake, Parr Park, and Timberline within a short drive. Our Gate Repair team keeps Grapevine on the route because the demand here never really stops: commercial gates up near the airport, residential gates down by the lake, and a lot of aging hardware in between.

Metal Gate Repair in Grapevine

Metal Gate Repair in Grapevine covers the full run of what homeowners actually own: ornamental iron driveway gates, steel pedestrian gates, aluminum frames that have gone out of square, and the heavy commercial swing and slide gates you see along International Parkway and SH-121. On residential jobs, we’re usually looking at bent hinge leaves, cracked welds at the picket joints, rust blooming around the bottom rail, or a post that has moved out of plumb and is now twisting the whole panel against the operator arm. Cody Beckman’s crews grind, weld, re-align, and re-lubricate with products that won’t stain your pavers or leave a chemical smell.

Ornamental Iron Gates in Lake-Area Homes

In the lake-area neighborhoods off Fairway Drive, we repaired a 16-foot custom ornamental iron swing gate whose hinge post had heaved out of plumb on the Blackland Prairie clay, leaving the panel dragging against the operator arm. We reset the post footing, corrected the sag at the hinge post, and retuned the LiftMaster operator. The gate now runs silently through its full cycle instead of binding at the halfway point. That’s the kind of repair that keeps a heavy bespoke gate running for another decade instead of tearing itself apart at the hinge welds.

Commercial Steel Gates Near DFW Airport

The airport corridor gives Grapevine a second gate repair profile most residential cities don’t have. We service heavy slide gates at rental car facilities and freight yards where a failed operator means a lane shuts down. A standard commercial slide gate V-wheel, rail, and opener adjustment in Grapevine runs $350 to $850 depending on gate length and drive type. You’ll see the exact number in writing before we begin.

Most residential metal gate repairs in Grapevine run $180 to $340 for hinge and latch work, and $350 to $750 when we’re replacing an operator arm or realigning a twisted frame. A full ornamental iron gate panel rebuild with new welds and repainting starts around $1,200. The Blackland Prairie clay under this city means posts move; we drill and set new footings deeper than the original pour when we see frost heave or shrink-swell movement.

Wood Gate Repair in Grapevine

Wood Gate Repair in Grapevine falls into two camps: the board-and-picket gates behind mid-century homes near Historic Downtown, and the larger custom timber gates on lake-area properties where the builder wanted a softer look than iron. Grapevine’s heat and humidity cycles warp cedar and pine faster than the product brochures will tell you. We’re usually called when a panel has dropped at the latch side, the hinges have pulled out of the post, or the boards are starting to split around the hardware. We’ll straighten the frame, sister in new wood where it’s needed, and reset hinges with longer fasteners or threaded inserts so they don’t strip out again in a season.

Sagging Panels and Split Posts

A sagging wood gate in Grapevine is almost never a one-part fix. The clay soil has likely moved the post, and the panel has racked as a result. We address both: resetting the post with a deeper, better-compacted footing and then squaring the panel with a tension or turnbuckle kit before re-hanging. Skip the turnbuckle and the gate will sag again before the next big rain.

Replacing Rotted Bottom Rails

Wood gates in Grapevine rot from the bottom up. Morning dew, sprinkler overspray, and the occasional ice storm all sit at the bottom rail until the wood softens and the hinges lose their bite. We cut out the rotted section, treat the remaining wood, and rebuild the bottom rail with pressure-treated material on an angle cut or with a drip edge so water can’t puddle. The price for a typical residential wood gate bottom-rail rebuild in Grapevine runs $220 to $480.

Planning a full wood gate replacement instead? Expect $850 to $1,800 for a custom cedar or pressure-treated gate built to match the existing look, with hardware, hinges, and a post assessment included. We’ll hand you a written price before any material is ordered.

Trusted Brands We Service in Grapevine

We’re factory-trained on the operators families actually own, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Grapevine customers that means we don’t guess at the wiring on a FAAC swing-arm operator or a Viking slide gate controller. We keep common boards, gear sets, and remotes in the truck, so a repair near Grapevine Mills or down by the lake usually happens the same visit. When a part for a rarer setup isn’t on the shelf, we order it with the fastest available dispatch and schedule the follow-up around your calendar.

Common Gate Repair Problems We See in Grapevine Homes

• Hinge post heave from Blackland Prairie clay. Grapevine’s expansive soil swells after rain and shrinks in drought, lifting and settling posts until the gate binds against the operator. We see the same homes twice in one year: once after summer dry spells drop a post, again after winter rains push it back up.
• Aging phone-entry and keypad systems. Many 1990s and 2000s lake-area custom homes are hitting their first major control board and motor replacement cycle. We match the new keypad or phone-entry module to the existing operator instead of ripping out a whole system you didn’t ask to replace.
• Ice damage from North Texas freezes. The February 2021 ice storm seized opener motors and cracked plastic gear sets across the metroplex, and Grapevine gates that were left closed under ice load warped at the frame. We still replace those broken gear sets and realign those warped panels years later.
• Rust and weld fatigue on ornamental iron. Grapevine’s humidity and the irrigation cycles in lake-area properties put moisture at the picket joints and bottom rails. A small rust bubble becomes a cracked weld faster than most homeowners expect, especially on heavier custom gates that cycle twice a day.

Pricing for Gate Repair in Grapevine, TX

We Also Serve Cities Near Grapevine

Our crews cover the full route around Grapevine, including Southlake, Colleyville, Euless, and Coppell. When you call, you’ll reach the same live-person dispatch line and receive the same written-price promise whether your property is on the east side of Grapevine or just over the city line. If you’re in a neighboring community with a gate that has stopped behaving, we’ll schedule you the same week.

FAQs About Gate Repair in Grapevine