Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Grapevine
A new driveway or pedestrian gate in Grapevine typically runs $2,800 to $9,500 for a standard ornamental iron install, and $4,800 to $14,000 when you add an electric operator with matched intercom and camera entry. We schedule Grapevine installs in measured steps: a free on-site measure, a written price before any work starts, then a scheduled install date. No same-day rush on a custom gate. The soil here decides a lot about how your gate will hold up, and we plan for that from the first visit.
Cody Beckman leads our Grapevine crews, and he’s particular about two things: how a gate runs ten years from now, and what your floors look like after we leave. Call (626) 649-4572 for a free estimate and we’ll come measure.
Why Latch & Post Gate Repair Is Grapevine’s Preferred Gate Installation Company
We’re the Gate Installation team homeowners call when the gate has to look right and run quiet. Grapevine residents off Dove Road, in the lake-area neighborhoods, and around Historic Downtown have us out for two reasons most often: an old gate that’s finally sagging past repair, or a new build that needs a custom ornamental gate matched to the house. Either way, the quote is written and agreed before we order steel.
Our technicians service the brands families here actually own: Linear, Ghost Controls, DoorKing. We stock common parts for those operators locally, which means a Grapevine install doesn’t stall waiting on a control board from out of state. Every visit includes shoe covers and drop cloths inside the home, a photo of the clean-up before we leave, and quiet tools if a baby’s napping. That’s the Cedarwell C.A.R.E. routine every crew follows, on every job.
Response times to Grapevine depend on the work. A measure for a new install is usually scheduled within a few days. Repair calls get priority, and we can often have someone out the same morning. You’ll always reach a live person when you call, any hour.
Gate Installation Services in Grapevine
Gate Installation Services in Grapevine means something specific here: a gate that holds up to Blackland Prairie clay, seasonal soil movement, and the occasional ice storm, while matching the house it fronts. A pedestrian gate in a mid-century Historic Downtown home runs $1,200 to $3,400 installed. A double driveway swing gate in a lake-area custom home typically starts around $3,800 and runs up from there based on width, ornamentation, and whether it’s automated.
Custom Ornamental Driveway Gates
Most of our Grapevine installs are ornamental iron driveway gates on lake-area properties. These gates weigh more than a standard tube-steel gate, so we spec the post footings and hinge hardware for the actual panel weight, not a guess. We fabricate or order to your exact opening width, then set the gate so it clears smoothly through every season.
Pedestrian and Walk-Through Gates
A walk gate off a side yard or pool run still needs a solid post footing. We see plenty of Grapevine walk gates that were set on shallow concrete and now drag on the latch side. Our installs dig deep enough for the clay’s swell-shrink cycle, then we hang the gate so the latch engages cleanly on the first try, every time.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Grapevine
Electric Gate Installation in Grapevine takes a standard gate install and adds the operator, keypad, intercom, camera, and safety sensors that make it open without you leaving the house. A full electric driveway gate install runs $4,800 to $14,000 in Grapevine, depending on gate size, operator type, and how far the power and data runs have to travel from the house or a remote post.
Matched Intercom and Camera Entry
Many Grapevine lake-area homes have long driveway pulls, and the intercom and camera wires follow that run. We use shielded cable on those long pulls so a summer storm doesn’t false-trigger your loop detector or photocells. The intercom, keypad, and camera are programmed together at install, not bolted on later as an afterthought.
Underground and Low-Profile Operators
On high-end ornamental gates, an above-ground operator arm can look wrong and snag on landscaping. We install underground operators where the driveway allows, keeping the gate line clean. These systems need proper drainage and a service loop in the conduit, and we build both in from the start rather than retrofitting later. A typical underground operator install on a custom gate in Grapevine runs $3,200 to $6,800 for the operator portion, added to the gate and footing work.
Trusted Brands We Service in Grapevine
Our techs are factory-trained on the brands Grapevine homeowners and businesses run every day: Linear, Ghost Controls, and DoorKing among them. We stock common control boards, remotes, gear sets, and safety sensors for these brands locally, which shortens repair turnaround across Grapevine. If you already have a Linear operator on an older gate, we can often rebuild or replace it without swapping the whole system. Same goes for a DoorKing on a commercial slide gate along the SH-121 corridor.
Common Gate Installation Problems We See in Grapevine Homes
- Shallow post footings on new installs. Blackland Prairie clay moves more than most soils. A footing set at 24 inches can heave within one wet-dry cycle. We set deeper footings with proper gravel drainage and rebar, and we’ve re-set plenty of gates that other crews installed too shallow.
- Operators sized for the gate, not the ice load. A heavy ornamental gate that runs fine in spring can stall under ice or after a North Texas freeze. We spec the operator for the panel’s actual weight plus a margin for ice, not the bare minimum from a spec sheet.
- Unshielded wiring on long driveway camera runs. Summer storms along the lake can induce false triggers on safety photocells and loop detectors when wiring isn’t shielded. We run shielded cable and separate the low-voltage data from power where the run is long.
- Undersized hinge posts on double gates. A double swing gate puts twice the load on each hinge post. We see posts that looked fine at install, then leaned within two years as the clay shifted. Our double gate installs use heavier-wall posts and through-bolted hinges, not lag screws.
Pricing for Gate Installation in Grapevine, TX
Here’s what Grapevine homeowners can expect, in real numbers:
- Pedestrian walk gate: $1,200 to $3,400
- Standard ornamental driveway gate, single swing: $2,800 to $5,500
- Double driveway gate, ornamental iron: $3,800 to $9,500
- Full electric install with operator, keypad, intercom, camera: $4,800 to $14,000
- Underground operator add-on: $3,200 to $6,800
- Heavy-duty commercial swing or slide gate, SH-121 corridor: $6,000 to $18,000+
The price you’re quoted is written and agreed before any work starts. No change orders at the end. A free measure comes first, then a line-item quote. Call (626) 649-4572 and we’ll walk your property and write it up.
We Also Serve Cities Near Grapevine
Our Gate Installation in Grapevine schedule regularly takes us to Southlake, Colleyville, Euless, and Coppell. Same crews, same written pricing, same door-to-door C.A.R.E. routine. If you’re just over the Grapevine line, we’ll come measure.
Serving Grapevine, TX - Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Grapevine
The Blackland Prairie clay under Grapevine swells when wet and shrinks when dry, and a shallow footing will heave or settle within one season. We set post footings deeper than standard, with gravel drainage and rebar, specifically to handle that movement. A gate installed without that prep will rack and bind, usually within the first year. Call (626) 649-4572 and we’ll explain what your soil means for your install during the free measure.
We install and service Linear, Ghost Controls, and DoorKing operators most often on custom Grapevine gates, and we stock parts for all three locally. The right choice depends on gate weight, cycle frequency, and whether you want an underground or above-ground mount. We’ll spec it during the measure and put the exact model in your written quote.
It can, and for most lake-area homes it should. A standard electric gate install includes the operator, keypad, and safety sensors. Intercom and camera entry are quoted as part of the full electric package when you want them, and we wire everything together at install rather than retrofitting later. We use shielded cable on long runs so storm season doesn’t cause false triggers.
Properties along SH-121 and International Parkway, near DFW International Airport, typically need heavy-duty commercial swing or slide gates built for high cycle counts and freight traffic. That’s a different spec than an ornamental lake-area driveway gate: heavier steel, bigger operators, and industrial-grade safety loops. We handle both ends of that split across Grapevine. Call for a site visit and we’ll spec the gate for the actual duty cycle.
Yes, if it’s built for it. The 2021 freeze seized operators with undersized motors and cracked plastic gear sets on gates left closed under ice load. On installs, we spec the operator with a margin above the panel’s actual weight, and we use metal gear sets where the gate is heavy. That’s a Grapevine-specific concern, and we plan for it on every new electric gate. Call (626) 649-4572 to talk through what your gate needs.
What Grapevine Homeowners Should Know Before Installing a Gate
Grapevine’s gate market splits two ways, and your install spec changes depending on which side you’re on. On the lake side, off Dove Road and around the gated communities near Grapevine Lake, homeowners want bespoke ornamental iron with matched camera and intercom entry, underground operators, and silent operation. On the SH-121 and International Parkway side, it’s commercial swing and slide gates that cycle hundreds of times a day for freight and logistics traffic. Both sit on the same Blackland Prairie clay, and both need post footings engineered for the swell-shrink cycle. A gate company that treats every Grapevine install the same will be back to fix it within a year. We’d rather do it once.
In the lake-area neighborhoods off Dove Road, we replaced a failing 1990s-era ornamental swing gate for a homeowner whose original install had undersized post footings. The clay had dropped the hinge post enough that sag correction alone wouldn’t hold. We set new deeper footings, mounted a LiftMaster operator with matched camera and keypad entry, and programmed the safety photocells and loop detector so the gate clears silently on every cycle. That’s the kind of install Grapevine’s high-end homes are asking for, and it’s the work we’re built for.
Call (626) 649-4572 for a free measure and written quote. A live person answers, any hour.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Grapevine since 2009.