Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Staten Island, NY
Staten Island gates carry more weight than gates anywhere else in New York City. The borough has the highest concentration of ornamental wrought-iron and aluminum driveway gates in all five boroughs, and a gate here is a curb-appeal statement as much as a security feature. Salt air off the Kill Van Kull and Arthur Kill corrodes hinges and buried anchors faster than inland neighborhoods ever see, and the hilly streets mean every post has to be plumbed against a slope. If your gate is sagging, scraping, or refusing to latch, call Latch & Post at (626) 649-4572 and we’ll give you a written price before we touch anything.
Why Staten Island Homes Are Different
The South Shore, from Eltingville down through Annadale, Great Kills, and Tottenville, is mostly 1960s-to-1980s colonials and split-levels built after the Verrazano-Narrows opened. Those homes went up with concrete pillars flanking the driveway, designed from day one to carry an ornamental gate. Forty or sixty years later, the pillars are still there but the gate hardware isn’t always cooperating. On the North Shore, St. George, Stapleton, and New Brighton have older Victorians where gate posts are original brick or brownstone that has settled and shifted, which throws off hinge alignment in ways a fresh set of bolts won’t fix.
Then there’s the salt. Staten Island is ringed by water on three sides: Upper New York Bay, Kill Van Kull, Arthur Kill. That salt air gets into every hinge, every lag bolt, every motor housing. Combine it with winter freeze-thaw cycles and the road salt that trucks spread on the borough’s hills, and you get buried post anchors that rust through in half the time they would in Queens. We see gates on the East Shore, around Midland Beach and South Beach, that survived Hurricane Sandy only to end up at the wrong grade height after home elevations, sitting on pillars that are now structurally questionable. That job effectively doesn’t exist in any other borough.
Our Main Staten Island Services
The two calls we get most from Staten Island homeowners are a sagging or seized gate that suddenly won’t close, and an electric opener that runs but refuses to move the gate. Each service has its own Staten Island page with the full detail – here’s the short version.
Gate Repair in Staten Island
A heavy ornamental gate on aging masonry pillars has a few very predictable failure points: hinge pins that have worn oval, latch bars that no longer line up, posts that have drifted out of plumb. We carry replacement hinges and latch hardware sized for the kind of scrollwork common on South Shore driveways, and we match the finish so the repair doesn’t stand out. Read the full breakdown on the Gate Repair in Staten Island page.
Gate Installation in Staten Island
New installations here usually mean either a replacement gate on existing concrete pillars, or a full post-and-gate package for a new driveway or a Sandy-rebuilt lot. We write down measurements, check the grade, and show you exactly what gets installed before ordering anything. The Gate Installation in Staten Island page covers options, materials, and what the job includes.
Electric Gate Repair in Staten Island
Salt air is hardest on electric operators. Motor housings corrode, sensor lenses cloud over, and underground wiring for keypads and safety edges degrades faster than they do inland. We troubleshoot control boards, remote programming, battery backup units, and photo-eye alignment. Details and brand-specific notes are on the Electric Gate Repair in Staten Island page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Staten Island
We stock common parts for Linear, Viking, Ghost Controls, and DoorKing operators, covering most of the openers installed on Staten Island driveways. When a board or arm needs replacing, we usually have it on the truck. For the full brand list and what we service, see our brands.
Pricing for Gate Company in Staten Island, NY
| Service | Typical range in Staten Island |
|---|---|
| Gate latch replacement | $120 - $240 |
| Hinge realignment or replacement | $180 - $380 |
| Post re-plumb or reinforcement | $300 - $650 |
| Weld repair on ornamental iron | $150 - $350 |
| Powder-coat touch-up (sectional) | $100 - $275 |
| Opener diagnostic and board replacement | $225 - $500 |
| Safety sensor or photo-eye replacement | $125 - $260 |
| Full gate installation on existing pillars | $2,200 - $5,800 |
Staten Island pricing climbs when we’re dealing with compromised pillars from Sandy-era lots, heavy scrollwork that needs custom matching, or salt damage that has spread past the visible rust into the anchor hardware. Whatever the scope, you get a written price before we start work – always, on every visit – and nothing is charged that wasn’t agreed to first.
Neighborhoods We Serve in Staten Island
We cover the whole borough. Most calls come from the South Shore where ornamental gates are everywhere, but the North Shore’s older posts and the East Shore’s post-Sandy grade issues generate their own steady work.
- Eltingville
- Annadale
- Great Kills
- Tottenville
- St. George
- Midland Beach
We schedule Staten Island calls in the order they come in, and a live person answers the phone around the clock. If the gate won’t close, someone will pick up at 2 a.m. and get you on the schedule.
Service Area – Cities Near Staten Island
While Staten Island keeps our calendar full, our crews are scheduled out of the brand’s New York City office and we cross bridges when a job calls for it. We also handle gate work in Brooklyn, NY, Manhattan, NY, and Bronx, NY, and we serve parts of the South Shore of Long Island including Long Beach, NY. If you’re on the fence about whether we cover your address, call and ask – a live person will answer.
Serving Staten Island, NY - Our Local Coverage Area
We’re based in the Staten Island area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Staten Island
That depends on the day’s schedule and where you are on the island. A live person answers the phone 24/7, so you’ll know within one call when we can be there, not after a callback queue. Emergency gate-down jobs get priority when a security risk exists.
Most repairs, latch replacements, and hinge work don’t require a permit. New installations, especially where posts are being set or electrical is being run from the house, may need one depending on your neighborhood. We’ll tell you during the estimate and factor it into the written price.
Yes. We work with quiet tools when kids are asleep, use pet-safe lubricants where there’s a choice, and lay down drop cloths and shoe covers before stepping inside. Tell us what your household needs when you call, and we’ll plan the visit around it.
If your gate is sagging, seized, or opening on its own, call Latch & Post at (626) 649-4572 for a free estimate and a written price before any work begins. A live person answers, day or night.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Staten Island Customers Say
"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs