Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Queens, NY
We’re Latch & Post Gate Repair, a Cedarwell-family gate specialist serving Queens homeowners. Most gate work here comes down to one thing: 70 to 100 year old brick pilasters that have settled and shifted, leaving swing gates dragging, binding, or refusing to latch. Queens has more private driveways than any other borough, and those original wrought-iron gates hung on brick were built to last a lifetime, not three. Our crews know the housing stock block by block, from Hollis to Bayside. Call (626) 649-4572 any time, day or night, and a live person answers.
Why Queens Homes Are Different
Queens holds the highest concentration of private driveways among all five NYC boroughs. The semi-detached and detached brick homes built during the 1920s through 1950s housing boom came standard with wrought-iron swing gates hung on brick or poured-concrete pilasters. Those pilasters are now 70 to 100 years old. Decades of uneven settling and frost heave have shifted them out of plumb. The result: post-realignment and hinge-pocket repair in deteriorated old brick is the single most common gate service call in Queens. This repair category barely exists at the same scale in Manhattan or the Bronx, where attached housing and apartment buildings dominate.
Climate adds another layer. Neighborhoods along Jamaica Bay, including Howard Beach, Broad Channel, and the Rockaways, face persistent salt air that corrodes steel and wrought-iron gate hardware in as little as five to seven years. The same components inland might last fifteen to twenty. Queens also averages roughly 20 freeze-thaw events each winter, heaving concrete driveways and gate posts seasonally. Spring is peak season for binding or dragging gate calls caused by posts that shifted over the winter. In neighborhoods like Jackson Heights, Bayside, and Hollis, a technician sees the same pilaster-repair sequence repeated block after block, because the housing era is so uniform.
Our Main Queens Services
Queens homeowners most often call about two things: a gate that won’t close right because the post or hinge has failed, and a motorized gate that won’t respond. Each service has its own Queens page with the full details, local pricing, and what to expect.
Gate Repair in Queens
When a Queens swing gate drags across the driveway or won’t latch, the culprit is usually a pilaster that’s moved out of plumb. We reset the post, patch the deteriorated brick or mortar around the hinge pockets, and re-hang the gate so it swings clean. Every repair starts with a written price before we touch anything. We lay drop cloths and wear shoe covers inside your home, and we use pet-safe lubricants where there’s a choice. The full breakdown on repair work in Queens is on our Gate Repair in Queens page.

Gate Installation in Queens
New gate installations in Queens usually begin with addressing what’s already in the ground. Old brick pilasters often need to be rebuilt or reinforced before a new gate can hang properly. We measure, order, schedule, and install with a written price agreed before any work starts, so there’s no invoice surprise. Because this is measured work rather than emergency work, we don’t promise same-day installation. Instead, we promise a free measure and a clear written quote. Details on materials, lead times, and what a full installation includes are on our Gate Installation in Queens page.

Electric Gate Repair in Queens
Queens has a specific wrinkle with motorized gates: NYC’s Department of Buildings requires entrapment-protection devices, safety edges, photo eyes, and auto-reverse on any motorized driveway gate in the five boroughs. Many Queens homeowners who installed automatic openers in the 1990s and 2000s without permits are now being flagged during home sales. That’s driving a surge of retroactive compliance work you wouldn’t see a technician in Nassau County handle. Our team is factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The full scope is on our Electric Gate Repair in Queens page.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Queens
Our technicians are factory-trained on the brands Queens families actually own, including FAAC, BFT, Linear, and Viking. We keep common parts stocked locally for faster turnaround, and every job is backed by our 365-Day Done Right Promise. See all the equipment we work on at our brands page.
Pricing for Gate Company in Queens, NY
Pricing in Queens reflects the age of the housing stock and the condition of the pilasters. A simple latch replacement runs less than a full post reset, naturally. Here’s what typical work ranges look like:
| Service | Typical range in Queens |
|---|---|
| Gate latch replacement | $145 - $285 |
| Hinge repair or replacement | $165 - $325 |
| Post realignment (single pilaster) | $260 - $480 |
| Hinge-pocket brick patching | $195 - $360 |
| Full gate reset (re-hang and realign) | $380 - $680 |
| Salt-corrosion hardware replacement | $220 - $440 |
| Standard gate installation (labor, measured) | $850 - $1,600 |
| Electric opener compliance retrofit (safety edges, photo eyes) | $540 - $1,100 |
What pushes a Queens price up is usually the masonry: if a pilaster has crumbled beyond patching and needs partial rebuilding, that’s more labor than a clean hinge swap. Coastal homes near Jamaica Bay face faster corrosion, which can mean replacing multiple hardware points rather than one. Whatever the number, you’ll see it in writing before any work begins, and it won’t change unless you approve a change in scope.
Neighborhoods We Serve in Queens
We serve the full borough. Most Queens calls get a same-day or next-day response, depending on the neighborhood and the nature of the repair. We know the block-by-block housing patterns in each area:
- Hollis
- Bayside
- Jackson Heights
- Howard Beach
- The Rockaways
Service Area – Cities Near Queens
Our New York City office coordinates scheduling for Queens crews, and we also serve nearby boroughs and communities. If you’re across the county line, our specialists in Brooklyn, NY, Manhattan, NY, Staten Island, NY, and Yonkers, NY cover those areas directly. Each location is an independent Cedarwell-family business working to the same Care Promise.
Serving Queens, NY - Our Local Coverage Area
We’re based in the Queens area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Queens
Most Queens neighborhoods get same-day or next-day response for repair calls. Installation and compliance work is scheduled around measurement and part availability. Call (626) 649-4572 and a live person will confirm the current schedule for your area.
Repairing an existing gate or pilaster generally doesn’t require a permit. Motorized gates do have to comply with NYC Department of Buildings entrapment-protection rules, and if you’re selling your home, the openers may need to be brought up to code.
Yes. Coastal Queens hardware corrodes much faster than inland parts, and we’re familiar with the specific failure patterns in Howard Beach, Broad Channel, and the Rockaways. We’ll assess the full hinge and latch assembly, not just the visible damage, and quote the complete scope in writing.
If your gate drags, won’t latch, or the opener’s stopped responding, call Latch & Post Gate Repair at (626) 649-4572 for a free estimate. A live person answers every call, and the written price you get is the price you’ll pay.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Queens Customers Say
"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon





Before
After
Before
After
Before
After