Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Oakhurst, CA
We’re Latch & Post Gate Repair, and we focus on one thing: gates that open, close, and hold the way they should. Oakhurst is different from the Valley floor, and a gate company that only knows Fresno or Madera conditions will misread what’s happening on your property. At 2,300 feet, overnight freezes seize operators and crack wooden panels. Long unpaved driveways on acreage parcels mean gates that work hard and fail in ways that surprise people. If your gate is leaning, dragging, or refusing to budge, call us at (626) 649-4572. A live person answers, day or night.
Why Oakhurst Homes Are Different
Most Oakhurst properties sit on rural acreage, and the gate is not an upgrade, it’s how the property works. Ranch homes, cabins from the 1960s and 70s, and vacation builds on one to five-plus acres all share the same pattern: a long driveway, a wooden or metal gate, and soil that holds water against the posts. Clay-heavy ground plus freeze-thaw cycles means a post that looked straight in September is leaning by February. When a wooden post rots at the base, the gate sags, the latch no longer lines up, and any operator attached to that gate starts fighting a frame that’s out of square.
We also see what flatland technicians never do: bear damage. In neighborhoods across Oakhurst, bears pry at latches, bend bottom rails, and snap wooden pickets trying to reach trash or a yard. A sprung latch or a bowed lower rail is rarely a mystery here. And because a large share of Oakhurst homes are vacation rentals or second homes, many calls start with an owner in Fresno, the Bay Area, or Southern California who got a text from a guest or a neighbor saying the gate won’t open. Those owners need a straight assessment and a written price, fast, without being on-site to watch the work.
Our Main Oakhurst Services
The two calls we get most in Oakhurst are for gates that have stopped working entirely and for operators that move the gate but grind, stall, or reverse mid-cycle. Here’s how each works.
Gate Repair in Oakhurst
A leaning post, a latch that no longer catches, a sagging wooden leaf that scrapes the ground: these are the Oakhurst gate repair calls. We start by finding out whether the post itself has rotted or shifted in the clay-heavy soil, because on older ranch gates, the post is almost always part of the problem. We quote the full repair, including any post replacement, in writing before we touch anything. If a bear has bent the bottom rail or a freeze has cracked a picket, we’ll tell you what can be saved and what needs replacing, and you’ll see the number first. Gate Repair in Oakhurst.

Gate Installation in Oakhurst
New gates in Oakhurst have to be built for the elevation and the soil, not just bolted in and left to sink. We set posts to handle freeze-thaw movement, choose hardware that won’t corrode in foothill winters, and build swing or slide gates sized to the driveway they serve. Every installation starts with a free measure and a written price that covers the gate, hardware, and the cleanup. No same-day promises here; good installation is scheduled, measured, and done once, properly. Gate Installation in Oakhurst.

Electric Gate Repair in Oakhurst
Oakhurst’s overnight freezes are brutal on electric gate operators. Gears bind, circuit boards short, and a gate that worked fine in October refuses to move on a 28-degree morning in December. We carry parts for Linear, Viking, Ghost Controls, and DoorKing operators and can usually diagnose the issue in one visit. For vacation-rental owners, we’ll photograph the repair and send you the written price before we start, so you can approve the work from anywhere. Electric Gate Repair in Oakhurst.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Oakhurst
We’re factory-trained on the brands Oakhurst homeowners actually own, including Linear, Viking, Ghost Controls, and DoorKing. When an operator fails in the cold or a receiver stops responding to a remote, the right part matters. We stock the most common replacement boards, sensors, and remotes for these brands, which means many Oakhurst electric gate repairs finish on the first visit. You can see the full list on our brands page.
Pricing for Gate Company in Oakhurst, CA
| Service | Typical range in Oakhurst |
|---|---|
| Gate latch replacement | $95-$185 |
| Sagging gate realignment | $140-$260 |
| Wooden post replacement (single) | $220-$420 |
| Hinge pair replacement | $110-$230 |
| Bottom rail repair (bear damage) | $130-$280 |
| Electric operator diagnostic visit | $75-$130 |
| Opener gear replacement | $180-$340 |
| Remote or keypad programming | $55-$110 |
| Full gate installation (standard materials) | $850-$4,500 |
| Operator installation | $750-$2,600 |
In Oakhurst, the price typically climbs when a wooden post has rotted below the soil line, when bear damage extends across multiple pickets, or when an operator from the 1990s needs a full replacement rather than a part swap. Whatever the number is, you’ll see it in writing before any work begins, and the price we quote is the price you pay. That’s the Cedarwell Care Promise, and it’s not optional.
Neighborhoods We Serve in Oakhurst
We work throughout the Oakhurst area, from quiet side roads to larger parcels off the main corridors. Here are a few of the neighborhoods we regularly serve:
- Yosemite Forks
- Sky Ranch
- Wildwood
- Coarsegold
- Ahwahnee
We can usually reach Oakhurst addresses for a diagnostic same morning or afternoon. For owners calling from out of town, we’ll coordinate the visit, send photos, and get you a written price before anything is touched.
Service Area – Cities Near Oakhurst
While Oakhurst is our focus here, our crews also respond to gate calls in nearby foothill and Valley communities. If you’re on the south side of the foothills, we serve Madera, CA and Chowchilla, CA. On the east side, we cover Clovis, CA. We also help homeowners around Fresno, TX. Every job, in every one of these areas, gets the same written price and the same cleanup routine.
Serving Oakhurst, CA - Our Local Coverage Area
We’re based in the Oakhurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Oakhurst
For Oakhurst-area calls, we typically arrive same morning or same afternoon for a diagnostic. Scheduling is coordinated from our Los Angeles office, and our crews serve Oakhurst locally, so we can work around rental turnover or a short visit from an out-of-town owner. Call (626) 649-4572 and a live person will get you on the schedule.
Most gate repairs and like-for-like replacements don’t need a permit. If you’re changing the footprint, adding a new automatic operator, or moving a driveway entry point, county requirements may apply. We’ll tell you exactly what your project touches and whether any filing is needed before we quote. You’ll see it all in writing.
Yes, and this is a big part of our Oakhurst work. Many of the gates we service belong to vacation rentals or second homes. We’ll take the call, visit the property, send you photos of what we find, and provide a written price before any work starts. When the job is done, you’ll get a cleanup photo so you can see exactly how the gate and the entryway look.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Oakhurst Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco





Before
After
Before
After
Before
After