Gate Repair Cost in Arlington - Real Local Prices, Then a Free Site Survey

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

How Much Does Gate Repair Cost in Arlington?

Gate repair in Arlington typically runs $150 to $450 for a single-item fix, with most homeowners landing around $225 to $300. Something as simple as a sticky latch or a misaligned post often comes in near the low end, while a failed gate operator or a bent frame pushes toward the higher figure. Your exact number depends on the gate type, the brand on the motor, and whether parts are in stock.

We give you that number in writing before we touch anything. Every visit starts with a written price, so you know what you’re paying before work begins. Call (626) 649-4572 for a free estimate, and a live person picks up day or night.

Gate Repair Cost Breakdown (2026)

Here’s what Arlington homeowners are actually paying this year. These ranges cover labor and standard parts for a typical wood, vinyl, or wrought-iron residential gate, including the automatic systems families around here rely on.

A latch replacement stays cheap because there’s not much to it and the part is common. Electric gate work costs more because diagnostics take time and the control boards on LiftMaster, DoorKing, or FAAC units aren’t inexpensive to source. What drives a price up: rusted posts that need to be pulled and reset in concrete, an operator that’s been failing for months instead of days, or a gate that needs a custom-fabricated bracket because the original is discontinued. What keeps it down: catching a small misalignment before it grinds the hinges down, and choosing a repair over a replacement when the frame itself is still sound.

What Affects Gate Repair Pricing in Arlington

Two gates the same size can cost very different amounts to fix. Here’s what moves the number:

• Gate type and material. A light aluminum driveway gate is easier to lift and adjust than a heavy steel or solid-cedar gate, and that difference shows up in labor time inside the DFW heat.
• The brand on your system. We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we carry the right diagnostics and often the right part. An off-brand operator can mean waiting on a special order.
• Whether it’s manual or automatic. Manual gate repairs are usually a single visit. Electric gate repair adds a diagnostic step and, sometimes, a return trip for a part.
• Post and footing condition. Arlington’s expansive clay soil shifts with our wet springs and dry summers, and that movement is behind a lot of the leaning posts we see in older neighborhoods. A post that’s cracked its footing is a bigger job than one that just needs a new hinge.
• Access and gate size. A wide driveway gate near a busy stretch off Cooper Street or in the Dalworthington Gardens area takes longer to service than a single walkway gate.
• Timing. A gate that won’t close is a same-day priority because it’s holding open your driveway. A squeaky roller can wait for a scheduled visit and costs less.

We mention pets and kids where it matters: if a repair touches the gate your dog uses to get in and out, we time the fix so the gate is never left open longer than necessary, and we can schedule around nap time when quiet matters.

How to Save on Gate Repair

The cheapest repair is the one you catch early. Here’s how Arlington homeowners keep their gate costs down:

1. Fix the small stuff before it spreads. A hinge that squeaks today is a hinge that seizes next month. A quick service call now beats a frame repair later.
2. Keep the track and rollers clear. In our pollen-heavy springs, a buildup of grit on a sliding gate’s track wears the rollers faster. A rinse and a wipe go a long way.
3. Lubricate, but lightly. A thin coat on hinges and latches keeps things moving. We use pet-safe lubricants where there’s a choice, which matters in households with dogs and cats.
4. Don’t ignore the operator. If your automatic gate hesitates or reverses on its own, call before it quits entirely. A sensor or control-board fix is far cheaper than a full motor replacement.
5. Ask for the written price first. You should never agree to work without seeing the number on paper. We provide that on every visit, no pressure to accept.

Start with a free estimate. Call (626) 649-4572 and we’ll tell you what’s wrong and what it costs before anything gets scheduled.

How We Handle a Gate Repair, Step by Step

Every job follows the same routine under our Cedarwell C.A.R.E. values, so you know exactly what to expect:

1. We explain the price before the work. You get the written figure first, always.
2. We clean up like it’s our own home. Shoe covers and drop cloths go down before we step inside, and we put on boot protection out at the gate too.
3. We ask before we move or touch anything. Nothing gets shifted without a heads-up, and we knock before opening a gate your pets are behind.
4. We respect your time and quiet hours. If a sleeping baby or a work call is happening, we keep it quiet and work around it.
5. We leave a cleanup photo. Before we go, we photograph the finished, tidy area and show you the result.

Every repair is covered by our 365-Day Done Right Promise. If it isn’t right, we make it right, no argument and no fine print. You can read more about how we work on our home page.

FAQs - Gate Repair Cost

How much does it cost to fix a gate in Arlington?

Most single-item gate repairs in Arlington cost between $150 and $450, with the average landing near $225. Simple fixes like a latch or hinge run on the low end, and electrical work on the operator runs higher. Call (626) 649-4572 for an exact quote, and estimates are free.

Is it cheaper to repair or replace a gate?

Repair is usually cheaper, often by $800 to $2,500, as long as the frame and posts are structurally sound. Replacing a full gate and operator typically starts around $2,000 to $4,000 or more. If your frame is solid, a repair almost always wins on cost. We’ll tell you honestly which one makes sense for your gate, and the written price comes first.

How much does electric gate repair cost in Arlington?

Electric gate repairs run $300 to $850 for most operators, and a full motor replacement runs $700 to $1,600. The brand matters: we’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we often diagnose and fix in one visit. Call (626) 649-4572 for a free estimate.

Do you charge for a service call or estimate?

Estimates are free, and you get a written price before any work starts. There’s no pressure to accept, and no surprise charge added later. A live person answers every call, 24 hours a day, so you can reach us at (626) 649-4572 whenever the gate gives you trouble.

Can you come out today if my gate won’t close?

A gate stuck open is a same-day priority for us. We answer the phone around the clock, so nights, weekends, and holidays are covered. Call (626) 649-4572 and we’ll get you a written price and a visit time, with a 365-Day Done Right Promise behind the work.

Latch & Post Gate Repair is part of the Cedarwell family of independently owned and operated gate specialists, serving Arlington since 2009. Every visit includes a written price, shoe covers and drop cloths, and a cleanup photo, all at no extra charge.

Get Your Free Estimate

Whether it’s a latch that won’t catch or an operator that’s stopped responding, the fix starts with a phone call and a straight answer on price. Reach out to Latch & Post Gate Repair at (626) 649-4572 for a free estimate. A live person answers around the clock, and we’ll give you the written number before any work begins. Backed by the 365-Day Done Right Promise and the Cedarwell Care Promise on every job.

Pricing reflects the Arlington market as of 2026. Latch & Post Gate Repair offers free estimates - call (626) 649-4572.

Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Arlington since 2009.