Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Lynwood, CA
Most of the gate work in Lynwood isn’t new construction. It’s saving the 30-to-40-year-old wrought-iron gates installed across this city’s post-WWII bungalows and ranch homes, many of which are now corroding, sagging, or failing at the hinge. We’re Latch & Post Gate Repair, a Cedarwell-family gate specialist, and we focus on exactly that: repairing, replacing, and automating gates on Lynwood’s small lots and narrow driveways. If your gate won’t latch, drags on the concrete, or the opener quit, call us at (626) 649-4572 and we’ll give you a written price before any work starts.
Why Lynwood Homes Are Different
Lynwood’s gate stock is older and harder-working than most of Los Angeles County. The city sits about 12 miles from the coast, close enough that the nightly marine layer leaves iron damp for hours. But the bigger factor is location: Lynwood is downwind of the Vernon industrial corridor, and that means gates here collect acidic particulate and exhaust residue that speeds up rust in ways you won’t see in Torrance or Downey. On the northern edge of Lynwood, where homes border Vernon, hinge pins and bottom rollers pit and seize years ahead of schedule. A call that starts as “the gate is sticking” often turns out to be a hardware replacement job once we inspect it.
The housing stock compounds it. Lynwood is dominated by post-WWII bungalows and ranch homes on narrow concrete driveways, many with shared-driveway setups converted to multi-family use. Gates here were often sized decades ago for a single car and a manual swing, which means two things today: they’re undersized for modern automatic operators, and they take a beating from repeated open-close cycles as multiple households share one driveway. We see more overuse wear on Lynwood openers and hinges than in almost any neighboring city.
Our Main Lynwood Services
Most Lynwood homeowners reach out for one of two things: a gate that won’t close or latch, and an operator that stopped working. Here’s what each involves in Lynwood, with the full detail on each service’s own page.
Gate Repair in Lynwood
Gate repair in Lynwood usually means rehabilitating an older wrought-iron gate on a small lot: re-welding a cracked hinge, replacing a corroded latch, squaring a frame that’s dropped, or freeing a post that’s shifted in the clay-heavy soil. On the north edge of town, near the Vernon line, we routinely find that hinge pins and rollers have pitted badly enough that a lube-and-adjust call becomes a hardware replacement once the gate is off. We carry common Lynwood hardware on the truck, and we’ll tell you the price before we touch anything. Gate Repair in Lynwood
Gate Installation in Lynwood
New gate installation in Lynwood almost always starts with one question: what will fit on a narrow concrete driveway without pinching a car door or blocking a walkway? Many existing gate openings were sized decades ago, so we measure for width, swing clearance, and post depth before recommending anything. Where a shared driveway is involved, we’ll talk through access for all households before the design is set, and we’ll schedule around quiet hours if that matters to neighbors. Gate Installation in Lynwood
Electric Gate Repair in Lynwood
Lynwood’s damp nights and industrial air are hard on operators and their wiring. We repair and service automatic gate systems on older gates that were retrofitted years ago, often with operators that are now undersized for the gate they’re driving. Common Lynwood jobs include replacing a burned control board, rewiring a corroded junction, adjusting force settings after a gate has sagged, and installing new safety edges or photocells where a gate now closes too close to a car or fence line. Electric Gate Repair in Lynwood
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lynwood
We’re factory-trained on the brands Lynwood homes actually have: FAAC, BFT, Linear, and Viking, plus DoorKing, LiftMaster, and others. We keep common Lynwood parts stocked locally, which often means a repair can be completed the same visit rather than waiting on a shipment. See our brands for the full list.
Pricing for Gate Company in Lynwood, CA
| Service | Typical range in Lynwood |
|---|---|
| Gate latch replacement | $180 - $340 |
| Hinge pin or roller replacement (per gate) | $220 - $410 |
| Weld repair at a cracked joint | $150 - $320 |
| Gate post reset or re-anchor | $380 - $720 |
| Manual gate alignment and lube service | $140 - $240 |
| Opener control board replacement | $280 - $520 |
| Safety edge or photocell replacement | $190 - $360 |
| Full operator replacement (basic swing) | $1,150 - $2,100 |
| New pedestrian gate install (standard width) | $900 - $1,800 |
| New driveway gate install (single swing, manual) | $1,400 - $2,700 |
Two things push Lynwood prices higher than a generic quote: rust damage on the northern edge of the city, where corroded hardware often has to be cut off rather than unbolted, and the narrow driveways that force tighter-fit hardware and more careful post work. Whatever the number is, you’ll see it in writing before we begin; nothing gets added after the fact.
Neighborhoods We Serve in Lynwood
We work across Lynwood, from the older blocks near the 105 to the residential streets around Plaza Mexico and the homes near Lynwood Park. Most Lynwood calls get a same-day or next-day visit depending on the season, and we schedule around school pickups and nap times where we can.
- Lynwood Park area
- Plaza Mexico vicinity
- Northeast Lynwood near the Vernon border
- Residential blocks south of the 105
- Northwest Lynwood near the 710
Service Area – Cities Near Lynwood
We serve Lynwood and the surrounding communities, including South Gate, CA, Paramount, CA, Huntington Park, CA, and Bell, CA. If your home sits close to a city line, call (626) 649-4572 and we’ll confirm coverage on the spot.
Serving Lynwood, CA - Our Local Coverage Area
We’re based in the Lynwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lynwood
Most Lynwood calls get a same-day or next-day visit depending on the season and where you are in the city. If it’s an emergency, like a gate that won’t close and can’t be secured, call (626) 649-4572 and a live person will answer and get you on the schedule.
Most like-for-like gate repairs don’t require a permit in Lynwood, but new driveway gates, particularly automated ones, can fall under city code for set-back and safety-edge compliance. We’ll check the current Lynwood requirement for your specific project before any work starts.
Yes, and we do it often. Shared Lynwood driveway gates wear faster from repeated cycles, and we’ll coordinate access with all households before we start. We can also install a keypad or remote system so each home gets its own entry method, and we’ll explain the setup and price in writing first.
Call Latch & Post Gate Repair at (626) 649-4572 for a free estimate on any gate work in Lynwood. A live person answers around the clock, and you’ll get a written price before anything is touched.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lynwood Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco