Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Brooklyn
Gate repair in Brooklyn means working with salt air, century-old iron, and landmark rules that most repair crews never think about. We fix sagging stoop gates in Park Slope, seized rear-yard gates in Carroll Gardens, and automatic driveway operators across the borough, usually within one business day of your call. Most repairs run between $180 and $650 depending on what failed, and you’ll see the exact number in writing before we touch anything. Call (626) 649-4572 and a live person answers, day or night.
Why Latch & Post Gate Repair Is Brooklyn’s Preferred Gate Repair Company
We’ve worked on enough Brooklyn brownstones to know that a gate here is rarely just a gate. It’s original 1890s ironwork on a landmarked block, or a steel courtyard gate on a converted Williamsburg loft, or a rear-yard passage gate that’s been fighting salt air from the Gowanus for fifty years. Our technicians are trained on the brands Brooklyn families actually own, from LiftMaster operators to Viking and Ghost Controls systems, and we carry stainless hinge pins, marine-grade fasteners, and period-appropriate flat-bar stock on the truck so the first visit is usually the only visit.
Cody Beckman leads our Brooklyn crew, and the standard he set is simple: leave the house cleaner than we found it. Shoe covers and drop cloths go down before we step inside. We ask before we move anything. If a kid is napping, quiet tools come out. And every job is covered by the 365-Day Done Right Promise. If the repair isn’t right, we make it right, no argument.
What separates us from a general handyman is that we only do gates. Latch and post, hinge and weld, operator and loop. That focus means we carry the parts that matter here, and we can look at a sagging stoop gate and tell you within minutes whether the hinge post needs resetting or just the barrel hinges need replacing. Every visit includes a written price before work starts, and a photo of the clean-up before we leave.
Driveway Gate Repair in Brooklyn
Driveway gate repair in Brooklyn covers everything from a sliding steel gate on a Marine Park driveway to an automatic swing gate at a Mill Basin corner lot. The salt air off Jamaica Bay hits these gates hard: hinge plates corrode, operator boards short from moisture, and freeze-thaw cycles heave the post footings out of plumb. We see the same failure pattern over and over, and we fix it the same way: stainless fasteners, sealed operator enclosures, and a post footing that drains properly so winter freeze-thaw can’t lift it again.
Steel Driveway Gate Realignment
A steel gate that drags on the concrete or won’t latch cleanly usually has a hinge plate pulling away from the post, not a bent gate panel. We verify with a level, then re-shim or re-weld the hinge plate and realign the leaf. Most driveway realignments in Brooklyn run $220 to $450, and the written quote is yours before we start.
Automatic Driveway Operator Repair
When a Brooklyn driveway gate stops responding to the remote, the operator board or the safety loop is usually the culprit. Moisture from coastal humidity creeps into control boxes and corrodes terminals, especially on operators installed before sealed enclosures became standard. We diagnose on site, replace only what’s failed, and test the full cycle, safety edges included. Automatic operator repairs typically run $350 to $900, depending on the board and actuator.
Gate Welding in Brooklyn
Gate welding in Brooklyn is the only permanent fix for cracked steel on stoop gates, rear-yard gates, and driveway leaves that salt corrosion has weakened at the hinge plate or latch housing. We do on-site TIG and MIG welding, including repairing cast iron where the original panel is worth preserving. Cost ranges from $150 for a small crack to $800 for extensive structural repair, and the quoted number is what you pay.
Weld Repair on Original Iron Gates
Original wrought and cast iron gates on Brooklyn brownstones crack at the hinged junction and at the bottom rail where years of swing stress and salt pitting have done their work. If a gate is in an LPC district like Brooklyn Heights or Park Slope, we match the original flat-bar profile so the repair doesn’t trigger a landmark review. That’s the difference between a weld that keeps your gate swinging and a stop-work order.
Portal Frame and Post Welding
When the post itself has cracked at the base, welding a patch plate over the split is a temporary fix. We re-weld the post base, then evaluate the footing, because if the footing is heaving from freeze-thaw, a new weld will fail within a year. That diagnosis is part of the estimate, and the repair is built to survive a Brooklyn coastal winter.
Trusted Brands We Service in Brooklyn
Factory-trained on the gate brands Brooklyn families and buildings actually run, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Most Brooklyn gate openers we see are LiftMaster or Viking, especially on residential driveway and stoop gates. We stock common boards, remotes, and safety edge components, so a DoorKing operator repair in Greenpoint or a Ghost Controls swing arm in Sheepshead Bay usually happens same visit, not after a week waiting on parts.
Common Gate Repair Problems We See in Brooklyn Homes
- Salt-driven hinge corrosion. Air coming off Upper New York Bay and the Atlantic shoreline at Coney Island and Sheepshead Bay carries salt that eats through plain steel hinge pins in three to five years. We replace them with stainless pins and marine-grade bushings that hold up in this environment.
- Freeze-thaw post heave. Brooklyn crosses 32°F dozens of times each winter. Water gets into the post footing, freezes, expands, and lifts the post. Gates start dragging, latches stop aligning, and welds crack at the hinge plate. The fix is resetting the post on a properly drained footing.
- Seized barrel hinges on landmark iron. Original 1890s and early 1900s gates on brownstone stoops and garden entries seize up from rust inside the barrel. We free them, replace the pin with stainless, and keep the original profile so LPC compliance stays intact.
- Operator board failure from coastal moisture. Gate operators on rear-yard and driveway gates near the waterfront short out when humid, salt-laden air gets into the control box. We reseal enclosures and replace only the damaged board, usually the same day.
Pricing for Gate Repair in Brooklyn, NY
Here’s what Brooklyn homeowners typically pay, in writing, before any work starts:
- Gate latch replacement: $120 to $240
- Hinge pin and barrel hinge replacement (per gate): $180 to $340
- Gate realignment (sagging or dragging gate): $220 to $450
- On-site gate welding (cracked steel or iron): $150 to $800
- Post reset and footing repair: $400 to $950
- Automatic operator board or actuator repair: $350 to $900
- Full service call and diagnostic (credited to the repair if you proceed): $89
Every estimate is free and arrives as a written price before we begin. You approve the number, then we work. No pressure, no surprise line items, no invoice bigger than the quote.
We Also Serve Cities Near Brooklyn
Our crews cover Manhattan, Staten Island, the Bronx, and Mount Vernon as well. If your property sits outside Brooklyn proper, we can still help. Our Gate Repair team works across the metro, and our Gate Repair in Brooklyn service includes free estimates by phone. Call (626) 649-4572 to check your address.
Serving Brooklyn, NY - Our Local Coverage Area
We’re based in the Brooklyn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Brooklyn
If your block is in an LPC historic district like Brooklyn Heights, Park Slope, Carroll Gardens, or Crown Heights North, repairing the existing gate in place usually qualifies as routine maintenance and needs only a Certificate of No Effect. The key is keeping the original flat-bar wrought iron profile and not swapping in modern square-tube steel. We handle that distinction on every landmark repair. Call (626) 649-4572 and we’ll tell you over the phone whether your specific gate needs LPC review.
Brooklyn is a peninsula with salt water on two sides: Upper New York Bay and Gowanus Bay to the west, and the Atlantic-facing shore at Coney Island and Sheepshead Bay to the south. Salt-laden air accelerates corrosion on iron and steel. Plain steel hinge pins, fasteners, and welds that would last fifteen years inland can fail in five here. That’s why we use stainless fixings and marine-grade hardware on every coastal Brooklyn repair.
Start with the breaker and the operator’s power switch, then look for a tripped safety loop or an obstruction on the track. If the operator hums but the gate doesn’t move, the actuator gear may be stripped. If nothing happens at all, moisture probably got into the control board. Either way, a Brooklyn winter is hard on openers near the water. Call (626) 649-4572 and describe the symptom; we’ll tell you what’s likely and what the repair will cost before we even arrive.
Usually yes. A sagging gate on a Park Slope stoop is often just worn hinge pins or a cracked hinge plate, not a failed post. We reset the hinge plate, replace the pins with stainless units, and realign the leaf. If the post itself has heaved from freeze-thaw, we’ll tell you that too, and the written quote will show both options. Most sagging gate repairs run $220 to $450.
Yes. Converted lofts in Williamsburg and DUMBO often have steel or aluminum courtyard gates with commercial operators, and those systems need the same coastal-grade corrosion protection as residential gates. We service building courtyard gates, loading-dock gates, and parking entry systems in converted industrial buildings across Brooklyn. Call (626) 649-4572 for a free assessment.
Call Latch & Post Gate Repair in Brooklyn
If your gate is sagging, seized, rusted, or the operator stopped responding, call (626) 649-4572. A live person answers around the clock, every day. We’ll give you a straight answer, a free estimate, and a written price before any work begins. Shoe covers on the floor, drop cloths down, and a photo of the clean-up before we leave. That’s the Cedarwell C.A.R.E. standard on every Brooklyn job.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, part of the Cedarwell family of independently owned and operated gate specialists.