Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Burbank
Gate installation in Burbank typically runs between $2,800 and $9,500 for a standard residential driveway gate, with automatic operators adding $1,200 to $4,500 depending on gate weight, material, and operator type. Most Burbank installations take one to three days once fabrication is complete, and we quote the full price in writing before any metal is cut. Call (626) 649-4572 and a live person answers, day or night.
What makes Burbank different from Glendale or North Hollywood is the combination of studio-corridor traffic, inland Valley heat, and salt air that drifts up from the coast. A gate that works fine in Beverly Hills may be undersized for the duty cycle a Rancho or Magnolia Park driveway sees on any given Tuesday. We’d rather show you why than sell you something you don’t need.
Why Latch & Post Gate Repair Is Burbank’s Preferred Gate Installation Company
We’re part of the Cedarwell family of independently owned and operated gate specialists, and we’ve focused exclusively on gates since 2009. Cody Beckman leads the team, and every technician who arrives in Burbank wears a uniform, has passed a background check, and carries factory training on the brands local families actually own: LiftMaster, Viking, DoorKing, and Elite, among others.
Burbank homeowners tell us the same thing over and over: they want a straight number, a clean floor, and a gate that works after the first visit. That’s the standard we hold ourselves to. The 365-Day Done Right Promise backs every installation. If something isn’t right, we make it right. No argument, no fine print.
Our crews coordinate from the brand’s Los Angeles office, so scheduling a Burbank job is quick. You’ll get a written price before any work starts, and we’ll leave your driveway cleaner than we found it. We lay drop cloths and put on shoe covers before stepping inside. That’s the Cedarwell C.A.R.E. routine, and it’s included on every single visit.
Gate Fabrication in Burbank
Gate fabrication in Burbank usually means building a driveway gate, pedestrian gate, or security gate to fit an opening that off-the-shelf models don’t cover, and most jobs run between $2,800 and $7,500 for fabricated steel before adding an operator. Much of Burbank’s housing stock is post-WWII ranch-style homes from the 1940s through 1960s, and many of those driveways have unusual widths or existing pillars that standard gate kits won’t fit. We measure the opening, design the gate around the actual hinge post and grade, and weld or bolt it in place to spec. You’ll see the exact number in writing before we cut anything.
Custom Steel and Tubular Gates
Most Burbank homeowners choose either steel frame with wood infill or tubular steel. In the studio-adjacent neighborhoods, painted mild steel is common, but it traps moisture at joints, and salt air from the coast accelerates corrosion. We recommend galvanized steel or stainless hardware on any custom gate in Burbank, even if the visible surface is painted to match the house. A galvanized frame with stainless hinges costs more up front, but it’s the difference between a gate that lasts 8 years and one that lasts 20.
Weld Repair During Fabrication
If you already have a gate that’s cracked at the hinge post, fabrication can include cutting out the failed weld and rebuilding the joint stronger than the original. This matters on Burbank’s older ranch properties, where 30-year-old tubular gates were retrofitted long before the current owners arrived. We can match the existing style closely enough that the repair looks original, and we’ll tell you honestly whether a repair makes sense or whether the steel is too far gone to save.
Automatic Gate Installation in Burbank
Automatic gate installation in Burbank adds between $1,200 and $4,500 to the gate itself, depending on whether you choose a slide operator, a swing-arm operator, or a linear ram, and whether your panel is light enough for a residential unit or needs commercial torque. Burbank’s inland San Fernando Valley location means summer highs above 105°F are common, and cheaper operators with undersized motors overheat and shut down. We won’t sell you an operator that can’t handle Burbank in August. The price is quoted before we order anything, and includes the operator, safety photocells, and control board.
Higher-Torque Operators for Heavy Panels
In the Rancho district on Burbank’s south side, many lots are zoned for horses and have swing gates sized for trailer clearance. A heavy 14-foot steel gate needs a higher-torque operator than a standard residential unit. We size the operator to the actual gate weight plus wind load, and we explain the number to you in person. If a standard operator would strain, we tell you. If a commercial unit is overkill, we tell you that too.
Entrapment Protection and Safety Photocells
Every automatic gate installation in Burbank should include entrapment protection, and that’s not an optional upgrade. Current code requires safety photocells or edge sensors on any automated gate that could close on a person, a pet, or a vehicle. We include photocells as standard on our automatic gate jobs, and we test the reverse function before we leave. If you have kids, this is the part you’ll care about most.
Trusted Brands We Service in Burbank
We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers the operators most Burbank homes already have, plus the commercial units running along the studio corridors. We keep common parts stocked for same-week installation, and if your existing gate has a DoorKing or Viking operator we can often integrate new hardware rather than replacing the whole system. That saves money and keeps a proven motor running.
Common Gate Installation Problems We See in Burbank Homes
- Corroded hinge posts from coastal salt air. The moisture that drifts up from the coast settles into the joints on painted mild steel and eats them from the inside. In Burbank, this happens years faster than in true inland cities like Altadena. We spec galvanized or stainless hardware on every new install.
- Overheated operator motors and control boards on summer afternoons. When Burbank hits 105°F, the inside of a metal operator box can go well past that. Cheaper boards burn out mid-summer, right when you want the gate open for air. We choose operators rated for sustained heat.
- Santa Ana wind damage to swing gate hinges. The winds that funnel through the Burbank terrain slam gates against their stops over and over. Hinges bend, welds shear, and post footings shift. We set posts deeper and spec heavier hinges than a standard installation would call for.
- High-cycle wear on studio-corridor slide gates. Along Olive and Alameda, delivery vehicles and crew vans open the gate dozens of times a day. Drive wheels and chains wear at a rate that would take a residential gate years. We’ve learned to size for that duty the first time, because replacing under-spec hardware twice costs more than doing it right once.
Pricing for Gate Installation in Burbank, CA
Here’s a straightforward look at what Burbank gate installation actually costs, based on the work we’ve done across the city:
| Service | Typical Burbank Price Range |
|---|---|
| Standard driveway gate (fabricated steel) | $2,800 - $7,500 |
| Automatic operator (residential swing or slide) | $1,200 - $3,000 |
| Higher-torque operator (Rancho trailer gates) | $2,500 - $4,500 |
| Pedestrian gate with lock and posts | $800 - $2,200 |
| Double gate set (driveway + matching pedestrian) | $4,500 - $9,500+ |
What affects the final number: gate length, material choice, whether we’re replacing posts or setting new footings, operator brand and torque, and whether we’re running new power from the panel or tapping an existing line. Every job is quoted in writing before we start. Call (626) 649-4572 and we’ll give you exact numbers for your opening. Estimates are free.
We Also Serve Cities Near Burbank
Our Gate Installation team covers more than just Burbank proper. We regularly install and repair gates in Burbank neighborhoods like Magnolia Park, the Rancho district, and the studio corridors, plus nearby Glendale, West Hollywood, Altadena, and Beverly Hills. If your home sits on the edge of any of those service areas, call us and we’ll confirm coverage for your street.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Burbank
Burbank sits close enough to the coast that salt-laden air drifts over the hills, and it settles into gate hardware, especially painted mild steel. The moisture works into hinge joints and weld points and corrodes from the inside out. Galvanized steel, stainless fasteners, and regular cleaning of the hinge post extend gate life significantly. If your gate is already showing rust blooms at the welds, call (626) 649-4572 and we’ll tell you whether it’s worth repairing.
Burbank’s summer highs above 105°F cause operator motors and control boards to overheat, and grease in hinges and rollers breaks down faster than it would in a coastal city. We size operators for sustained Valley heat and use components rated for the temperatures your driveway actually reaches. That’s a discussion we have before we recommend equipment, not after it fails.
Rancho-district gates usually need to clear horse trailers, which means heavier panels and wider openings than a standard Burbank driveway gate. A 14-foot steel swing gate puts real strain on its hinges and operator, so we size the motor to the actual load. If you keep horses, we also recommend an operator with a manual release so you can open the gate by hand during a power outage or an emergency on the property. Call us for a measure and a written price.
Burbank’s production studios run delivery vehicles and crew vans through their gates dozens of times a day, so slide gates along the Olive and Alameda corridors rack up commercial-level cycle counts. Drive wheels and chains wear in months, not years. We source heavy-duty replacement components and can set up a maintenance schedule that keeps the gate running through production season.
Yes. Any automatic gate in California should include entrapment protection, typically safety photocells or edge sensors, to ensure the gate cannot close on a person, pet, or vehicle. We include this as standard on every automated installation we do in Burbank, and we test the reverse function before we leave your property. It’s part of doing the job right, not an add-on you need to ask for.
Ready to Talk About Your Burbank Gate?
If you’re ready to talk through what your Burbank gate installation will cost, call (626) 649-4572 for a free estimate. We’ll arrange a time to measure your opening, check your posts, and give you a written price. No pressure, no obligation, and no surprises on the invoice. A live person answers day or night, and we’ll treat your Burbank home the way we treat our own.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Burbank since 2009.