Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Beverly Hills
Gate installation in Beverly Hills means working with gates that weigh half a ton, sit on steep slopes, and often connect to a Control4 or Crestron system inside the house. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we’ve been handling exactly this kind of work since 2009. Our crews know the Flats, Trousdale Estates, and the streets south of Sunset well enough to spec the right operator before we ever lift a tool. Call (626) 649-4572 and a live person answers, day or night.
Why Latch & Post Gate Repair Is Beverly Hills’s Preferred Gate Installation Company
Most gate companies in Los Angeles treat Beverly Hills like any other zip code. We don’t. The housing stock here is different: heavy original wrought-iron work from the 1920s and 1930s, modernist steel gates on Trousdale Estates slopes, and automation systems that talk to the whole house. That’s why homeowners keep our number. Cody Beckman, who leads our team, insists every technician understand what a 1,200-pound gate does to a standard operator on a 20-degree driveway before we sell anything.
We also arrive prepared for the way Beverly Hills families live. Drop cloths go down before a single tool comes out. Shoe covers go on at the door. If a child is napping, we use quiet tools and schedule around it. And before we touch anything, you get a written price. Not a ballpark. Not a verbal estimate. A number on paper. That’s the Cedarwell Care Promise, and it applies on every job, whether we’re hanging a new pedestrian gate off Roxbury Drive or rebuilding a double driveway gate near the Beverly Hills Hotel.
Electric Gate Installation in Beverly Hills
Electric Gate Installation in Beverly Hills almost always involves more than bolting a motor to a post. The gates here are heavier, the driveways steeper, and the home automation expectations higher than almost anywhere else in Los Angeles. A typical electric gate installation in Beverly Hills runs $4,500 to $12,000 depending on gate weight, operator type, and whether we’re running new low-voltage wiring through existing hardscape. That price includes the operator, safety photocells, wiring, and programming. You’ll see the exact number in writing before any work starts.
What drives cost most is torque. A 600-pound steel swing gate on a flat lot in the Flats needs a different operator than an 1,100-pound gate on a Trousdale slope. We spec incline-rated operators on steep driveways and dual-motor setups when the gate width or wind load demands it. Then we calibrate the open and close force limits so the motor isn’t fighting gravity every cycle.
Swing and Sliding Gate Operators
Swing gates are what we see most often in Beverly Hills, especially the older estates. Sliding gates appear on narrower lots and hillside properties where a swing arc would eat the whole driveway. Both need properly rated operators, and both fail early when the installer ignores the slope.
Safety and Code Compliance
Automatic gates in Beverly Hills must meet UL 325 safety standards. That means photo eyes positioned correctly, obstruction sensing active, and warning signage posted. We handle all of it, and we test every safety function before we leave the property.
Driveway Gate Installation in Beverly Hills
Driveway Gate Installation in Beverly Hills covers everything from a simple single swing gate to a custom-built double gate with an intercom and camera integration. Most full driveway gate projects here range from $7,000 to $25,000. The spread comes down to materials: powder-coated steel with cedar infill costs less than a fully custom wrought-iron gate fabricated to match a 1930s original. We quote the gate, the posts, the operator, the safety system, and the electrical run as one written number.
We build driveway gates that survive Santa Ana season. That means wind-stop hardware so an unlatched gate doesn’t slam against its stops. It means stainless hinges instead of painted steel, because the salt air that reaches Beverly Hills kills painted steel within a few years. And it means auto-close timers tuned so the gate closes before a gust can catch it open.
New Posts and Core Drilling
Older Beverly Hills driveways often have brick or stone columns we need to work around. We core drill where needed and set new steel posts in concrete below the frost line, which matters less for cold than for the lateral force a heavy gate puts on its post in wind.
Double Gates and Security Gates
Double driveway gates are common on wider lots in the Flats. Security gates, often with pedestrian access built in, show up more on Trousdale Estates and hillside properties. Both require precise alignment so the leaves meet square and the operator doesn’t strain against a binding hinge.
Trusted Brands We Service in Beverly Hills
We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Beverly Hills we install a lot of FAAC and DoorKing operators because their incline-rated and high-torque models hold up to the gates here. We also service Linear and Viking on older estates where the original operator is still in place and the owner wants to keep the existing hardware. If you’re not sure what brand you have, describe it over the phone and we’ll tell you what to look for before scheduling.
Common Gate Installation Problems We See in Beverly Hills Homes
- Underspecced operators on Trousdale driveways. A standard flat-driveway operator on a steep slope burns out its motor within months because it’s continuously braking against gravity. We fix this with incline-rated or dual-motor setups.
- Corroded hinges and welds. Salt air from the coast reaches Beverly Hills and accelerates rust on painted steel hardware. Gates start sagging at the hinge post within a few years when the wrong fasteners were used originally.
- Wind damage after Santa Ana events. Sudden gusts slam unlatched gates against their stops, bend aluminum frames, and strip worm-gear teeth inside operators fighting to hold position. Wind-stop hardware and timer calibration prevent most of this.
- Home automation conflicts. Heavy ornate gates tied to Control4 or Crestron systems fail when low-voltage wiring or safety photocells develop faults after wind events. We troubleshoot the integration without blaming the AV contractor.
Pricing for Gate Installation in Beverly Hills, CA
Here are real numbers for Beverly Hills. A pedestrian gate install typically runs $1,800 to $4,500. A single driveway swing gate with operator runs $6,000 to $14,000. A custom double driveway gate with full automation and safety equipment runs $12,000 to $25,000. Electric gate operator replacement alone runs $2,500 to $5,500. What moves the number: gate weight, driveway slope, whether we’re core drilling into stone columns, and whether the gate needs to integrate with an existing Crestron or Control4 system. Every quote is written, and the price we quote is the price you pay. Call (626) 649-4572 for a free estimate, and we’ll walk the property and give you the number on paper.
We Also Serve Cities Near Beverly Hills
Our Gate Installation team covers Beverly Hills and the surrounding area, including West Hollywood, Culver City, Santa Monica, and Marina del Rey. If you’re just over the border in any of those cities, the same written-price promise and cleanup routine apply. For more on what we do locally, see Gate Installation in Beverly Hills.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Beverly Hills
Beverly Hills sits inland from the coast, which amplifies Santa Ana wind intensity compared to Santa Monica or Marina del Rey. Those high-velocity gusts hit gates hard, stripping worm-gear teeth in operators that are already working against the extra weight of custom wrought-iron gates common here. The steep driveways in Trousdale Estates add continuous gravitational load, which burns out under-spec motors within months. So yes, operators in Beverly Hills genuinely do fail faster, and the fix is an incline-rated or dual-motor spec plus wind-stop hardware. Call (626) 649-4572 and we’ll assess what your gate actually needs.
Incline-compensating operators, often dual-motor, are the right choice for Trousdale Estates slopes. These units are designed to hold a heavy gate in position on a grade without continuous braking that overheats the motor. We recently installed a new dual-motor operator on a 1,200-pound custom wrought-iron swing gate in Trousdale Estates. The original LiftMaster unit had stripped its worm gear fighting gravity and wind gusts, so we upgraded to a FAAC incline-rated operator with stainless hinges and adjusted the open/close force limits to match the slope and gate weight. If you’re on a hillside lot, call (626) 649-4572 and mention the slope. It changes everything about the spec.
Salt air from the coast reaches Beverly Hills and eats painted steel hinges and welds years faster than inland. The first thing to fail is usually the hinge post connection, where moisture sits and rust forms. For new installations we specify stainless steel fixings and galvanized posts wherever possible, or powder-coated steel with a marine-grade finish on the gate frame. These choices add a little to material cost but mean the gate won’t sag at the hinge within a few years. We’ll show you the hardware options and the price difference in writing before we start.
Yes. We regularly integrate new operators with Control4 and Crestron systems in Beverly Hills homes. The key is matching the operator’s low-voltage interface to the home automation panel correctly. Most wind-related failures we see on automated gates are actually photocell misalignment or loop detector faults on the low-voltage side. We test the entire safety circuit before and after integration so the system works as one unit. Let us know which platform you’re running when you call (626) 649-4572.
Automatic gates in Beverly Hills must meet UL 325 safety standards, which include photo eyes or contact edges that detect obstructions, an audible alarm or warning device for certain operator types, and proper signage. Photo eyes need to be positioned so they can’t be bypassed by a child or pet, and the obstruction sensing must reverse the gate within two seconds of contact. We install and test every required safety feature on every automatic gate installation, and we document the test before we leave. Call (626) 649-4572 if you’re not sure whether your current gate meets code.
Call Latch & Post Gate Repair for Gate Installation in Beverly Hills
If you’re in Beverly Hills and need a gate installed, replaced, or automated, call (626) 649-4572. A live person answers, day or night. We’ll schedule a visit, walk the property, and give you a written price before any work begins. You’ll get shoe covers and drop cloths on every visit, a photo of the cleanup before we leave, and the 365-Day Done Right Promise on every installation. That’s the way we’ve worked since 2009, and it’s the way we work in Beverly Hills.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Beverly Hills since 2009.