Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Broadview Park
A full gate installation in Broadview Park typically runs $2,400-$5,800 for a standard single swing driveway gate, and $7,500-$14,000 for a sliding or double gate with an operator. We’re the team you call when you want a straight written price before any work starts, and a crew that leaves your floors clean. As part of the Cedarwell family, Latch & Post Gate Repair has been focused exclusively on gates since 2009. Call (626) 649-4572 and you’ll speak to a live person, day or night.
Broadview Park is a specific kind of place to work on gates. Unincorporated Broward County means different permitting rules than Plantation or Davie. Flat, low-lying lots mean posts sit in standing water half the year. And the postwar concrete-block homes here, most built between the 1950s and 1970s, carry hardware that’s been fighting South Florida humidity for six decades. We know these blocks off SW 20th Street, SW 24th Street, and the smaller streets off State Road 7 and Davie Road. That local knowledge matters when you’re deciding between repairing a sagging gate or pulling a county permit for a full replacement.
Key Takeaways
- Written price before any work begins, always
- 365-Day Done Right Promise on every installation
- Factory-trained on FAAC, BFT, Linear, Viking, and other brands Broadview Park homes actually use
- Full replacements in unincorporated Broadview Park trigger a Broward County permit; repairs often don’t
- Shoe covers and drop cloths on every visit, plus a cleanup photo before we leave
Why Latch & Post Gate Repair Is Broadview Park’s Preferred Gate Installation Company
Homeowners in Broadview Park call us because we understand what their gates are up against. The neighborhood’s grid of modest single-family homes, most with original chain-link perimeter fencing and single-swing drive gates on aging galvanized hardware, presents repair decisions that an incorporated city would handle differently. We don’t push replacement when the real fix is a new hinge post and stainless hardware. That’s the kind of honesty that’s built our reputation here.
Our background-checked, uniformed technicians operate under the Cedarwell C.A.R.E. values: clean up like it’s our own home, ask before we move or touch anything, respect your family’s time and quiet hours, and explain the price before the work. If your kids are napping, we’ll schedule around it. If your dog is wary of strangers, we’ll knock and wait. These details show up in every Broadview Park visit, whether we’re on SW 21st Street or a side street off 441.
Every call is answered by a live person, 24/7. Not a voicemail queue. You’ll get a written price before any work begins, no pressure to accept, and the 365-Day Done Right Promise if something isn’t right. Cody Beckman leads our team, and he’s built it around a simple idea: every gate comes down to two parts, the latch that holds it and the post that carries it. That’s the job we focus on.
Automatic Gate Installation in Broadview Park
Automatic gate installation in Broadview Park means adding an operator, safety edges, and wiring to a gate that’s already worth keeping, or building a new gate and operator as one job. Homeowners here choose it for drive gates that get opened multiple times a day, especially during the rainy season when getting out of the car to swing a gate open means standing in a downpour. A typical automatic swing gate installation in Broadview Park runs $4,200-$8,900 depending on gate size and operator brand. You’ll see the exact number in writing before we touch anything.
Operator Selection for Humid Conditions
We recommend operators rated for outdoor humidity, and we spec enclosures that keep moisture away from control boards. FAAC and BFT hydraulic operators hold up well on Broadview Park’s concrete-block posts because their sealed units don’t breathe the way cheaper chain-drive units do. We stock parts locally for these brands, which means fewer trips back and a faster turnaround on repairs.
Entrapment Protection and County Compliance
Any automatic gate installation in Broadview Park needs entrapment protection: photo eyes, safety edges, or both, depending on the gate type and operator. This isn’t optional extras, it’s what keeps your kids and pets safe. We install and test these on every automatic job, and we’ll show you how they work before we leave.
Gate Installation Services in Broadview Park
Gate installation services in Broadview Park cover everything from a new pedestrian gate on a side yard to a double swing driveway gate in aluminum or steel. We build gates that match the scale of the home, often a modest concrete-block house where a massive ornamental iron gate would look out of place. Standard single swing gate installations here run $2,400-$5,800. Sliding gates, which make sense on narrower lots along some of Broadview Park’s smaller streets, start around $5,500 for a basic manual setup.
Driveway and Pedestrian Gates
Driveway gates in Broadview Park are almost universally swing gates on original posts, which means the post is usually the failure point. When we install a new gate, we set new galvanized posts with stainless hardware as the standard. Pedestrian gates get the same treatment on a smaller scale, with proper concrete footings that won’t heave after a rainy season.
Sliding and Double Gates
Sliding gates work well on Broadview Park lots where the driveway is short and there’s no room for a swing arc. Double gates are common where the driveway is wide enough for two cars. Both need level ground or proper track installation, which matters on Broadview Park’s flat terrain, where minor grade changes can throw off a rolling gate’s alignment within a season if the track isn’t set right.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Broadview Park
We’re factory-trained on the brands families actually own. In Broadview Park, that means FAAC, BFT, Linear, and Viking show up most often, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for these locally, so a repair doesn’t sit for a week waiting on a shipment. When you call about an FAAC operator that’s throwing an error code, or a Linear remote that stopped pairing, we know the unit. The right fix happens on the first visit.
Common Gate Installation Problems We See in Broadview Park Homes
- Hinge posts corroding below grade. Broadview Park’s flat, low-lying lots hold standing water around post footings through the June-October rainy season. The post rots or oxidizes underground while the visible part looks fine, so the gate starts sagging with no obvious cause.
- Original iron hinges and welds oxidizing within a few seasons. Year-round subtropical humidity, even miles from the coast, attacks painted iron and uncoated steel. Swing gate pivots seize up, and operator arms end up doing work they were never designed to do.
- Operator control boards failing early in humid enclosures. We see LiftMaster and FAAC units with corroded boards because the enclosure wasn’t sealed against Broadview Park’s soaked concrete-block walls. Moisture gets in through the knockouts and stays there.
- Repeated patch jobs on 60-year-old hardware. Because a full replacement means a Broward County permit in unincorporated Broadview Park, homeowners often patch and re-patch original hardware. We’re comfortable with honest repair work that keeps a gate in service, and we’ll tell you when the repair is no longer the economical choice.
Pricing for Gate Installation in Broadview Park, FL
Here are honest numbers for Broadview Park’s market. A manual single swing gate installation runs $2,400-$5,800. An automatic swing gate installation runs $4,200-$8,900. Sliding gate installs start around $5,500 manual and $8,000 with an operator. Double gates run $6,500-$14,000 depending on size, material, and operator. What moves the price: gate width, material choice (aluminum vs. steel), operator brand, whether we need to set new posts, and whether any demo of the old gate is involved. A full replacement in unincorporated Broadview Park also means a county permit, which we’ll walk through with you. You’ll get a written price before any work starts, always.
We Also Serve Cities Near Broadview Park
Our Gate Installation team covers Broadview Park and the surrounding metro area. We regularly work with homeowners in Jacksonville, Miami, Tampa, and Orlando who need the same written-price, cleanup-photo standard. If you’re in Gate Installation in Broadview Park or anywhere nearby, the same Cedarwell Care Promise applies.
Serving Broadview Park, FL - Our Local Coverage Area
We’re based in the Broadview Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Broadview Park
Yes, a full gate replacement in unincorporated Broadview Park requires a Broward County permit rather than a city one. Pure repair work, like replacing a hinge or a post without altering the gate’s footprint, often skips that step entirely. We’ll tell you which side of the line your job falls on before any work starts, and we handle the permit paperwork when it’s needed.
The difference is drainage and housing stock. Broadview Park’s lots are flat and low-lying, so rainwater pools around post footings instead of running off. Many of the homes are 1950s-1970s concrete-block construction with original iron hardware that was never coated for decades of subtropical humidity. Plantation and Davie have newer stock and better drainage on many streets, which is why you see more repair-and-patch cycles here.
Specify galvanized steel posts set in proper concrete footings with a gravel base for drainage, stainless steel hinges and fasteners, and a sealed operator enclosure with gasketed knockouts. Aluminum gate frames hold up better than painted steel in this climate, though steel with a proper powder coat can work. We write these specifications into every quote because the alternative is another repair call in three seasons.
In Broadview Park, nine times out of ten it’s the post. The concrete or steel below grade has corroded or the footing has heaved, and the gate panel is just following it down. We were called to a postwar home off SW 20th Street where a single-swing drive gate had been sagging for years. The panel was fine. The hinge post had corroded below grade from standing water pooling after the rains. We cut out the failed footing, set a new galvanized post with stainless hinge hardware, and corrected the sag, keeping the original frame in service rather than pulling a county permit for a full replacement.
Yes. Every automatic gate installation here needs entrapment protection, whether that’s photo eyes, safety edges, or both. This is a safety requirement, not an upgrade, and it’s non-negotiable on our jobs. We install and test the protection before we consider the job done, and we’ll show you how to test it yourself. Call (626) 649-4572 and a live person will walk you through the next step, any hour, any day.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Broadview Park as part of the Cedarwell family since 2009.