Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Broadview Park, FL
Latch & Post Gate Repair is a Cedarwell-family gate specialist serving Broadview Park, FL. We focus on three things: gate repair, gate installation, and electric gate repair. Broadview Park is an unincorporated Broward County pocket, which means a full gate replacement here triggers county-level permitting rather than a municipal process, while pure repair work often skips that step entirely. That single distinction shapes more of our Broadview Park calls than almost anything else. If you need a gate fixed or replaced, call (626) 649-4572 and a live person will answer.
Why Broadview Park Homes Are Different
Broadview Park is dense with modest single-family concrete-block homes built largely in the 1950s through 1970s. Most still have their original chain-link perimeter fencing and simple single-swing gates on aging galvanized or iron hardware. Decades of minimal upkeep mean we routinely find badly corroded hinges, failing post footings, and sagging gate frames that owners have patched repeatedly rather than replaced. The low-lying, flat terrain holds standing water around gate posts after the June through October rainy season, which accelerates below-grade post corrosion and concrete footing heave. Then there is the year-round subtropical humidity. Even miles from the coast, iron and steel hardware oxidizes within a few seasons if left uncoated. Because Broadview Park is unincorporated, many long-term homeowners do not realize a full replacement requires a Broward County permit rather than a city one. That bureaucratic wrinkle consistently pushes jobs toward repair-and-patch work, so our technicians arrive prepared for creative fixes on hardware that a neighboring Plantation or Davie homeowner might have replaced years ago.
Our Main Broadview Park Services
Most Broadview Park calls fall into one of two categories: a sagging or corroded gate that still has life in it, and a gate that has finally failed past reasonable repair. Each service below has its own Broadview Park page with full pricing and details.
Gate Repair in Broadview Park
Gate repair in Broadview Park usually means addressing what decades of humidity and pooled rainwater have done to hinges, posts, and frames. We see a lot of galvanized hardware that has rusted through at the weld points, and post footings that have heaved from seasonal saturation. The repair often extends the life of the original gate by years, which fits both the permit situation and the repair-over-replace reality of this unincorporated area. We write the price before any work begins, then protect the surrounding area while we work. Gate Repair in Broadview Park covers the full scope.
Gate Installation in Broadview Park
When a Broadview Park gate has finally failed past reasonable repair, installation is the honest answer. The work often includes removing the old post footings, setting new ones with proper drainage so standing water does not repeat the same failure, and hanging a gate suited to inland Broward humidity. Because Broadview Park is unincorporated, we help homeowners understand the county permit step so there are no surprises midway through. We quote the job before anything is ordered or scheduled. Gate Installation in Broadview Park has the details.
Electric Gate Repair in Broadview Park
Electric gate repair in Broadview Park frequently involves operators and control boards fighting the same humidity that eats mechanical hardware. We service the brands families here actually own, and we carry common parts for several of them so many repairs finish on the first visit. Safety edges, photo eyes, and limit switches need to be checked carefully after the rainy months, when moisture finds its way into junction boxes and connectors. We power everything down, diagnose the problem, and give you the written price before touching anything further. Electric Gate Repair in Broadview Park explains what we fix.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Broadview Park
Our technicians are factory-trained on the gate operators Broadview Park homeowners actually run, including Viking, Ghost Controls, DoorKing, and Elite. We stock common boards, remotes, receivers, and safety parts locally, which helps us turn many Broadview Park repairs around in a single visit. See our brands page for the full list and training details.
Pricing for Gate Company in Broadview Park, FL
| Service | Typical range in Broadview Park |
|---|---|
| Standard gate latch replacement | $85-$180 |
| Hinge replacement (pair) | $120-$250 |
| Gate frame straightening / sag repair | $140-$320 |
| Post re-setting (single post) | $200-$420 |
| Gate wheel / caster replacement | $60-$140 |
| Chain-link gate install (standard single) | $350-$750 |
| Electric operator diagnostic & adjustment | $90-$180 |
| Safety edge / photo eye replacement | $110-$260 |
| Control board replacement | $250-$600 |
| Remote programming / receiver replacement | $70-$160 |
Broadview Park pricing runs toward the upper end of these ranges when decades of standing-water exposure have made post extraction and footing replacement part of the job. You will always see the exact number in writing before we begin any work, and every quote is no-hassle and no-obligation. The 365-Day Done Right Promise covers every Broadview Park repair and installation we complete.
Neighborhoods We Serve in Broadview Park
We cover all of Broadview Park, from the streets closest to State Road 7 and Davie Boulevard through the residential grid that runs toward Riverland Road. These neighborhoods share the same postwar concrete-block housing stock, aging chain-link fencing, and water-saturated soil conditions, so the gate problems tend to look the same from block to block. Typical response time for the area is within one to two business days for non-emergency work.
- The residential streets off Davie Boulevard
- The blocks near State Road 7 and Peters Road
- The grid around Riverland Road
- Homes bordering the Broadview Park drainage canal areas
- Properties along the unincorporated edges near Plantation and Davie
Service Area – Cities Near Broadview Park
While this page focuses on Broadview Park, our crews also serve nearby South Florida communities through their own dedicated pages. If you live a bit farther out but still in the region, you can find coverage details for Miami, FL, Orlando, FL, Tampa, FL, and Jacksonville, FL on their respective pages. Scheduling for Broadview Park is coordinated from our Miami-office dispatch team.
Serving Broadview Park, FL - Our Local Coverage Area
We’re based in the Broadview Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Broadview Park
Most pure repair work in Broadview Park does not require a permit. Because the area is unincorporated, it falls under Broward County rules, and a full gate replacement usually does trigger a county permit rather than a city one. We can help you sort out which category your job falls into and what paperwork, if any, applies before work begins.
For many urgent gate repairs we can reach Broadview Park the same day, and our live phone line is answered 24/7 if a gate has failed and will not close. For installations and electric operator work, we schedule a measured visit and provide a written price before ordering any parts. Call (626) 649-4572 and we will tell you honestly what is possible.
Yes. We can schedule Broadview Park visits around your quiet hours, and our technicians work with quiet tools when kids are asleep or pets are resting. We lay drop cloths and wear shoe covers before stepping inside, use pet-safe lubricants where there is a choice, and send you a photo of the clean-up before we leave. Just tell us what your household needs when you call (626) 649-4572 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Broadview Park Customers Say
"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide