Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Installation Across Orlando
Gate installation in Orlando means matching the right hardware to the way this city actually lives. A homeowner in College Park needs something different from a property manager in Champions Gate, and a gate that works beautifully in a mild climate will not survive the lightning and humidity here. We install driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates across Orlando every week, and we quote the full job in writing before any work starts. Call (626) 649-4572 and you’ll reach a live person, not a phone tree.
Most Orlando homes were built between the 1980s and early 2000s. The gates on those properties were often the cheapest acceptable spec at the time, which means a lot of homeowners are now living with builder-grade hardware that was never meant for the cycle counts this city puts on it. That is the core of what we fix and replace. Our Gate Installation team pulls out the tired equipment, runs proper power, sets solid footings, and hangs a gate that actually works for the way you use your driveway.
Why Latch & Post Gate Repair Is Orlando’s Preferred Gate Installation Company
Latch & Post Gate Repair is part of the Cedarwell family of independently owned and operated gate specialists, and we’ve been doing this since 2009. Our Orlando customers tend to notice the details: the written price before any work begins, the shoe covers going on before we step inside, the drop cloths protecting the entry tile. That’s the Cedarwell Care Promise, and it’s not an upsell or a premium tier. It’s simply how every visit works.
Our techs in Orlando are factory-trained on the names families actually have mounted alongside their driveways: Linear, Viking, Ghost Controls, and DoorKing, among others. They see the same neighborhoods you do. They know that a house in Baldwin Park may have a fully different gate setup than a vacation rental townhome off US-192, and they quote accordingly. Every job is backed by the 365-Day Done Right Promise. If it’s not right, we make it right. No argument, no fine print.
Orlando homeowners also get something most local gate companies do not offer: a cleanup photo before the technician leaves. You’ll see the area the way we left it. Floors clean. Grounds tidy. Gate tested.
Sliding Gate Installation in Orlando
Sliding gate installation in Orlando is usually the right call for properties where a swing gate would eat up too much driveway length or fight the grade of the lot. Homes in neighborhoods like Winter Park and Maitland often have driveways that slope toward the street, and a swing gate needs flat lead-in space to operate cleanly. A sliding gate travels along a track or a cantilever system, so it handles tighter setbacks and steeper approaches without forcing cars to back up onto the street while the gate opens.
A typical sliding gate installation in Orlando runs $4,200 to $9,800 depending on gate width, material, and whether we’re adding automation. Aluminum slide gates in this market tend to land between $3,800 and $7,500 for single-car widths; double-width driveway slide gates run higher, especially with a new operator and safety photocells. You’ll see the exact number in writing before we touch anything. That is not a promise we make lightly; it is the rule on every single visit.
Retrofit Slide Gates on Older Lots
Many Orlando homes built in the 1990s have narrow side yards and short driveway aprons. A swing gate would clip the neighbor’s fence or block the sidewalk. We convert those to slide-and-track systems, which means setting a new rail footing, running power to the receiver post, and often adjusting the concrete approach so the gate doesn’t bind. It’s more involved than bolting on a panel, but the result is a gate that opens fully without eating the whole driveway.
Cantilever Slide Gates for Gravel Drives
Some Orlando properties, particularly rural-adjacent lots in east Orange County and the Goldenrod area, have gravel or grass parking pads instead of finished concrete. A cantilever slide gate doesn’t need a track running across the opening, which means no rail to get jammed with stones or lawn debris. We set the carrying posts deeper than a standard track would demand and use heavier gate panels. If your driveway is unpaved, tell us on the call so we quote the right system the first time.
Gate Opener Installation in Orlando
Gate opener installation in Orlando is the most common job we do, and it’s also the one where homeowners get burned by cheap, generic openers. The right opener for a lakefront home in Windermere is not the right opener for a short-term rental near Walt Disney World. We match the operator to the cycle count, not just the gate weight. A builder-grade unit rated for 500 cycles a day is fine for a quiet cul-de-sac, but it will die inside a year on a vacation-rental driveway.
A standard gate opener installation in Orlando averages $1,600 to $3,400, which includes the operator, mounting on a proper footing, safety photocells, and programming. If the gate was installed manual during the original build and has no conduit stub at the hinge post, the job changes: we trench the power run, set a post pad, wire low-voltage control lines, and sometimes add a loop detector. That retrofit typically runs $2,800 to $5,200 depending on trench length and surface. Again, you’ll have the full written price before any work starts.
Solar Gate Openers for Remote Setbacks
Some Orlando properties have gate posts that sit far from the house panel, and running a 120-volt line means trenching under landscaping, sidewalks, or pavers. A solar kit paired with a low-draw operator can be the cleaner answer. We mount the panel on the post or a nearby fence line, size the battery to the gate’s daily cycle count, and we still run low-voltage lines for safety edges and keypads. Solar works best on south-facing posts with clear sky. We’ll tell you honestly if your tree cover makes it the wrong choice.
Replacing Builder-Grade Openers
In communities like Champions Gate and Reunion Resort, we see the same pattern again and again: the original builder installed a residential-rated operator because it was cheap, and short-term rental turnover cycles it into an early grave. We replace those units with commercial-duty operators built to handle 1,000-plus cycles a day, and we add surge suppression on the board so Lightning Alley doesn’t kill the new one on the first summer afternoon. The price for a commercial-duty replacement in Orlando runs $2,400 to $4,800. It is the difference between replacing the opener every 10 months and not thinking about it for years.
Trusted Brands We Service in Orlando
We stock common parts for the brands Orlando homeowners actually have on their posts: Linear, Viking, Ghost Controls, and DoorKing. That means when your control board goes bad, we aren’t waiting on a part to ship from somewhere else. We carry boards, receivers, limit switches, and safety edges in our local stock, and our techs arrive with the right gear on the truck. For vacation-rental owners along the US-192 corridor, that fast turnaround matters when a gate failure blocks guest check-ins. A broken gate is a review problem in that world, and we treat it that way.
Common Gate Installation Problems We See in Orlando Homes
- Builder-grade openers burning out in under a year. Along the US-192 and Osceola County vacation corridor, guest turnover pushes gate operators far beyond what residential units are rated to handle. We regularly replace openers that failed at 8 to 12 months of short-term rental use.
- No power or conduit stubbed at the hinge post. Many Orlando homes were built with manual gates as the default. When owners decide to automate them later, there is often no power run, no low-voltage conduit, and no proper post footing to mount an operator. That’s a retrofit job, not a bolt-on.
- Lightning-surged control boards. Central Florida sits in Lightning Alley, the corridor with the highest ground-strike density in the country. Summer storms fry control boards, and the humidity corrodes terminal connections inside operator housings. We add surge suppression and sealed enclosures on every new opener install in Orange and Osceola counties.
- Rust perforation on ornamental iron pickets. Year-round subtropical humidity and afternoon downpours accelerate rust on gate panels, especially where pickets meet the bottom rail. When we install a new swing or slide gate in Orlando, we use powder-coated aluminum or zinc-primed steel so it doesn’t start rusting through before the loan is paid off.
Pricing for Gate Installation in Orlando, FL
Here is what we quote in the Orlando market right now. A standard single swing gate with a manual latch runs $1,800 to $3,900. Adding a gate opener brings the full job to $3,400 to $6,500. A sliding gate installation lands between $4,200 and $9,800 depending on width, track type, and automation. Double driveway gates, common in HOA and lakefront communities, run $6,500 to $14,000 installed with operators and safety edges. Retrofit automation on a gate that was built manual falls between $2,800 and $5,200 because we’re trenching power and setting proper footings, not just swapping hardware. The price you’re quoted is the price you pay, and it’s in writing before we start. Call (626) 649-4572 for a free estimate on your specific gate.
We Also Serve Cities Near Orlando
Our crews work throughout the greater Orlando area every week. If you’re in Winter Park, Maitland, Goldenrod, or Altamonte Springs, you’re inside our normal service radius, and the same written-price and cleanup-photo routine applies. Whether it’s a full Gate Installation in Orlando proper or a retrofit on a gate in Winter Park, the scope gets priced the same way: honestly, specifically, and before we start.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Orlando
Because the gate cycles hundreds of times more than the operator is rated for. A residential unit rated for 500 open/close events a day can see 1,200 to 1,400 cycles when guests are checking in and out around the clock. We have pulled failed builder-grade operators out of Champions Gate and Reunion Resort that died in 10 months. The fix is a commercial-duty operator sized for the actual cycle count, plus surge suppression for lightning. Call (626) 649-4572 and we’ll spec the right unit for your turnover rate, not the other way around.
Yes, and we do it often. The catch is that a gate installed manual usually has no power conduit stubbed to the hinge post, no operator mounting pad, and no low-voltage line for a keypad or safety photocell. The retrofit involves trenching power, setting a proper post footing, running control wiring, and mounting the operator. In Orlando, a typical retrofit runs $2,800 to $5,200 depending on trench length and surface. You’ll have the written price before we start.
Orlando sits inside Lightning Alley, the stretch of Florida with the highest ground lightning strike density in the country. Summer afternoon storms send surges into gate operator boards, frying them. We see board replacements spike every June through September. On new installs we always add surge suppression and use sealed enclosures, because the board that survives Orlando’s storm season is a board that wasn’t left exposed to it.
A swing gate needs flat, open lead-in space so the gate can arc without blocking the driveway. A sliding gate travels along a track or cantilever rail, which suits narrower setbacks, sloped driveways, and lots where a swing would clip the neighbor’s fence. In Orlando’s older neighborhoods with tight side yards, slide gates often win. We’ll look at the lot and tell you which one actually fits. The quote is free.
Yes. Solar gate openers work well for Orlando gates where trenching a 120-volt line under sidewalks or landscaping would cost more than the opener itself. We pair a solar panel with a low-draw operator and size the battery to your daily cycles. The panel needs a south-facing post with clear sky. If your trees block the sun, we’ll tell you solar won’t work and quote the trench instead. Call (626) 649-4572 for an honest assessment.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, part of the Cedarwell family of gate specialists serving Orlando since 2009.





Before
After
Before
After
Before
After