Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Windcrest
Electric gate repair in Windcrest usually costs between $160 and $420 for common fixes like a dead control board, a strained gate motor, or a misaligned safety sensor. Most calls in Windcrest get a same-day or next-day visit, and you’ll see a written price before any work begins. Windcrest has a very specific housing stock: mid-century ranch homes with ornamental iron gates that are now 50 to 70 years old, and the local soil works against those gates every single season. If your gate is struggling, call us at (626) 649-4572 and a live person will answer, day or night.
Why Latch & Post Gate Repair Is Windcrest’s Preferred Electric Gate Repair Company
Latch & Post Gate Repair is part of the Cedarwell family, and we’ve focused on gates since 2009. We’re not a general handyman service. Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on.
In Windcrest, our technicians know the gates on Hathaway Drive, the long ranch-style lots along Midcrown, and the older sections around Windcrest Drive. They know the original concrete footings under those gates, and they know what Bexar County clay does to them. Our team is background-checked and uniformed. They put on shoe covers and lay drop cloths before stepping inside, and they photograph the clean-up before they leave. It’s not an upsell. It’s how every visit works.
Windcrest homeowners regularly tell us what they notice most is the calm. The technician knocks, explains the price, asks before moving anything, and keeps tools quiet when kids are asleep. That’s the Cedarwell C.A.R.E. routine, and it matters in a neighborhood where homes are close together and gates sit right at the sidewalk. Our Electric Gate Repair team works the same way on every visit.
Automatic Gate Repair in Windcrest
Automatic Gate Repair in Windcrest almost always comes down to one of three things: an operator that has died, a safety sensor that has fallen out of alignment, or a gate that has shifted on its hinges enough to strain the motor. In this city specifically, that third cause is common. Original 1950s to 1970s concrete post footings crack and heave with Bexar County’s clay, and the gate starts binding. The operator works harder, overheats, and fails. Fixing the gate alignment is often the real repair, not just swapping a part.
Gate Motor and Control Board Work
A straining motor on a Windcrest gate usually pulls more amperage than the control board was built to handle. Our technicians diagnose the full circuit before replacing anything: motor, board, wiring, and the physical gate movement. That way a new board doesn’t burn out six weeks later.
Safety Sensor and Photocell Replacement
Many legacy operators in Windcrest predate modern UL 325 entrapment protection, which means no working photocell or edge sensor. We replace these per current safety standards, and we explain what was missing before we touch anything.
Electric Gate Motor in Windcrest
Electric Gate Motor replacement in Windcrest typically runs from $380 to $750 for most residential swing gate operators, installed and adjusted. The exact number depends on the gate’s weight and length, the condition of the hinge posts, and whether the old motor’s wiring can be reused. We give a written price before any work starts, so there’s no guessing.
On Windcrest gates, motor life is shorter than the national average. Summer temperatures above 100 degrees Fahrenheit break down operator lubricant, and clay soil shifts posts season after season. A motor that has to fight a misaligned gate burns out years early.
Operator and Arm Replacement
Older piston and arm-style operators on original ornamental iron gates often outlast their own electronics. When we can, we keep the gate and replace only the operator, saving the homeowner from a full rebuild.
Transformer and Power Supply Checks
In Windcrest’s older ranch homes, outlets supplying gate operators sometimes sit on circuits that have been tapped repeatedly over the decades. We verify voltage and wiring before condemning a motor.
Trusted Brands We Service in Windcrest
We service and install Linear, Viking, Ghost Controls, and DoorKing operators, among others. Our technicians are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, which covers nearly every older operator we encounter around Windcrest. The useful part for a Windcrest homeowner is that our San Antonio dispatch office keeps common parts for these brands stocked locally, so we don’t have to order a control board and come back a week later.
Common Electric Gate Repair Problems We See in Windcrest Homes
- Heaved hinge posts from black-clay shrink-swell. The gate panel is often perfectly fine, but the original concrete footing has shifted the post out of plumb. The gate binds, and the motor strains until it quits. This is the single most common repair call in Windcrest.
- Obsolete control boards with no entrapment protection. Many legacy operators around Windcrest predate UL 325. They run without a safety photocell or edge sensor, which means a closing gate can strike a child or pet without reversing. Retrofitting a modern board and sensors fixes this.
- Rust perforation at welds and hinge fatigue. Ornamental iron gates from the 1950s through 1970s rust at weld points where moisture collects. Hinge fatigue follows. We replace hinges and weld plates when the steel itself is still sound.
- Dead remotes and water-damaged keypads. Windcrest’s intense summer storms and quick temperature swings age exterior keypads fast. Water finds a way into older housing, and contacts corrode. Often a fresh board inside the keypad is all that’s needed.
Pricing for Electric Gate Repair in Windcrest, TX
A typical electric gate repair in Windcrest runs between $160 and $420. Simple remote reprogramming or a keypad swap runs on the low end, around $140 to $220. A control board replacement usually lands between $300 and $550. A full operator and motor replacement starts around $500 and can reach $800 for heavier ornamental iron gates. What affects the price here more than anything is post alignment: if the clay has heaved a footing, we may need to re-pour and re-plumb the post before the gate will ever run smoothly. You’ll always see a written price before work starts, and no work begins until you approve that number.
We Also Serve Cities Near Windcrest
While this page is written for homeowners in Windcrest, our Windcrest crews regularly handle gate work in nearby communities as well. We serve Houston, San Antonio, Dallas, and Fort Worth, with the same written-price rule and the same Cedarwell C.A.R.E. cleanup on every job. If you’re just across the Windcrest line in San Antonio, we can be there.
Serving Windcrest, TX - Our Local Coverage Area
We’re based in the Windcrest area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Windcrest
Yes, in most cases an original Windcrest ornamental iron gate can be retrofitted with a modern operator, provided the gate structure itself is still sound and the hinge posts can be stabilized. We assess the welds, hinges, and footing condition first. If the gate is solid but the post has leaned, we re-pour the footing and then install a new operator. Call (626) 649-4572 and we’ll give you a straight answer, with a written price either way.
Windcrest sits on Bexar County’s expansive black clay, which shrinks during droughts and swells during rain. That cycle pushes original concrete footings laterally and vertically, season after season. A gate that was plumb in April can bind by October. The long-term fix is a properly set footing, not repeated hinge adjustments. Call (626) 649-4572 to have one of our gate post specialists take a look.
Yes. Operators installed before modern UL 325 requirements often have no entrapment protection, meaning the gate will not reverse if it meets a child or pet while closing. For a family home in Windcrest, that’s a real risk. Retrofit kits add a photocell and edge sensor to most legacy operators, and we include this check on every repair visit. Call (626) 649-4572 to schedule a safety inspection.
The Holiday Lighting Contest. Every year, Windcrest homeowners prep their exteriors for neighborhood judging, and that’s when neglected gate problems surface: dead operators, corroded hinges, rust damage. Late fall is our busiest season in this city precisely because the contest forces everyone to look at their gates again. Book early in October if you can, before the rush.
Yes. We service every one of those brands, and our San Antonio dispatch office stocks common parts for them. Older linear actuators and piston arms are still repairable in many cases. We’ll tell you honestly if a motor is worth saving or if replacement is cheaper over the next year. Call (626) 649-4572 and we’ll talk through it.
One Windcrest Gate Story Worth Telling
We were called to a mid-century ranch off Windcrest Drive where a LiftMaster operator on a swing gate had been dead for weeks. The gate itself was original 1960s ornamental iron, but the real failure was a cracked concrete footing that had let the hinge post lean; the control board was fine. We re-poured and re-plumbed the post, corrected the sag, and the original gate swung true again. No replacement needed.
How Windcrest’s Soil Creates a Specific Repair Decision
Windcrest was developed almost entirely between the 1950s and 1970s as a planned residential community. That means the housing stock is strikingly uniform, and with it, the gate inventory. Original ornamental iron and steel gates, now 50 to 70 years old, sit on original concrete footings that were poured before anyone knew how Bexar County clay would behave over decades. The shrink-swell cycle pushes those footings around with every drought and every heavy rain, far more concentrated here than in San Antonio’s newer outer subdivisions. The practical question for a Windcrest homeowner is simple: can this post be re-plumbed, or is it time to replace the footing entirely? We walk through that math on every visit, with a written price for both options. A generic electric gate repair page can’t give you that answer, because it doesn’t know what Windcrest’s clay does to a 1960s gate post.
If your gate is straining, stuck, or just not moving the way it used to, call Latch & Post Gate Repair at (626) 649-4572. A live person answers, 24 hours a day. We’ll schedule a free estimate, give you a written price before any work starts, and leave your home the way we found it, minus the gate problem.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Windcrest since 2009.