Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Dallas
Electric gate repair in Dallas typically runs between $145 and $480 depending on whether we’re fixing a keypad, replacing a sensor, or re-aligning a post that Blackland Prairie clay has pushed out of plumb. Most repairs in Dallas are completed the same day we arrive, and a written price is placed in your hand before any work begins. If your gate is grinding, stalling, or refusing to open on a Lemmon Avenue townhome or an East Dallas ranch, call (626) 649-4572 and a live person answers, day or night.
Why Latch & Post Gate Repair Is Dallas’s Preferred Electric Gate Repair Company
We’ve been part of the Cedarwell family of independently owned gate specialists since 2009, and our Dallas crews spend their weeks in the exact neighborhoods where automated gates are most concentrated: Oak Lawn, Uptown, Knox-Henderson, Lower Greenville, and the older ranch streets of Lake Highlands. Our technicians are background-checked, uniformed, and factory-trained on the brands Dallas homeowners actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Every job carries the 365-Day Done Right Promise, which means if a repair isn’t right, we make it right with no argument and no fine print.
Dallas customers see the same routine on every visit, and it’s written into the Cedarwell Care Promise. We lay drop cloths on your floor and put on shoe covers before stepping inside, we ask before moving anything, and we photograph the cleanup before leaving. If your kids are napping, we use quiet tools and we schedule around it. Cody Beckman built this operation around a simple idea: a gate company should leave your home the way it found it. That’s not a marketing line here. It’s the non-negotiable part of the job.
Commercial Gate Operator in Dallas
Commercial Gate Operator work in Dallas often means a slide gate on a townhome cluster or a small office lot off Mockingbird Lane or Inwood Road where the operator housing sits on a concrete pad that clay soil has slowly tilted. The operator itself may test fine while the drive wheel sits out of alignment with the rack and pinion, so the gate grinds or stalls partway through travel. We shim and re-level the pad, reset the post footing if needed, and re-plumb the track before we ever consider replacing the motor. A commercial operator service call in Dallas typically runs $180 to $340, and the written quote is in your hand first.
Operator Pad Realignment
The concrete slab under a slide-gate operator is the first thing our Dallas technicians check on Oak Lawn and Uptown townhome corridors. Blackland Prairie clay swells after rain and contracts in drought, tilting the pad a few degrees, which is enough to throw the drive wheel out of contact with the rack. We re-shim and re-level the pad, then test the full travel cycle with the gate under load.
Legacy Operator Retrofits
Many of the townhome gates built during the 2000s and 2010s construction wave around Knox-Henderson and the Design District are now 15 to 25 years old, which means control boards are crossing into obsolete territory. When a board fails on a Viking, Ghost Controls, or DoorKing operator, we check the unit’s overall condition before recommending anything. Sometimes a retrofit board kit keeps the gate running for a reasonable cost. Other times a new operator is the honest answer, and we’ll tell you that before the work starts, not after.
Gate Opener Repair in Dallas
Gate Opener Repair in Dallas is where the 100-degree weeks show up most clearly. The heat breaks down lubricant inside the operator’s gearbox and thermally expands the metal track, so a swing gate over a west-facing drive in Lake Highlands can start binding in July even when it moved freely in March. The repair usually involves re-lubricating the drive train, freeing the thermal bind, and verifying the opener’s force settings, which Dallas sun can push past acceptable limits. Expect $160 to $310 for a typical opener repair, with the exact figure quoted in writing before we touch anything.
Thermal Bind and Track Expansion
When metal tracks expand under weeks of sustained 100-degree heat, a gate that was silent in spring starts grinding by August. We see this most often on unshaded west-facing drives in Balch Springs and Mesquite as well. The fix usually involves re-lubrication, track realignment, and adjusting the motor’s travel limits so the gate isn’t fighting its own rails.
Opener Electronics
Hard freezes like the February 2021 event have claimed a measurable number of operator circuit boards across Dallas. Ice-loaded gate panels weigh far more than the motor is rated for, and the strain cracks boards and snaps frozen hinges. We stock a solid range of boards for Elite, Viking, and Ghost Controls operators in our Dallas-Fort Worth office, so a board replacement is often completed in a single visit.
Trusted Brands We Service in Dallas
Our technicians are factory-trained on the brands families across Dallas already have mounted on their posts: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common parts for those brands moving through our Dallas-Fort Worth office, which shortens turnaround when a keypad dies or a circuit board needs replacing. When we pull up to an Oak Lawn townhome or a Duncanville driveway, the right board is usually already in the van. That means fewer return trips and fewer days with a gate that won’t open.
Common Electric Gate Repair Problems We See in Dallas Homes
- Clay-soil post heave. Blackland Prairie clay is one of the most reactive soils in North America. After a wet spring, gate posts across East Dallas and Lake Highlands tilt, which pulls hinges out of alignment and makes a swing gate catch on its latch or a slide gate bind in its track.
- Operator pad tilt. The concrete pad under a slide-gate operator cracks or tilts as the clay beneath it moves. On 2008-era townhome clusters off Lemmon Avenue, this is the most common reason a LiftMaster or DoorKing operator tests fine but the gate grinds and stalls halfway through travel.
- Heat-broken lubricant. Sustained weeks over 100°F bake the grease out of operator gearboxes and thermal-expand tracks until a gate binds. West-facing drives take the worst of it, and we re-lubricate and adjust travel limits more often in Dallas than almost anywhere else in Texas.
- Freeze-cracked boards and hinges. February 2021 showed what a hard freeze does to electric gates: circuit boards crack, hinges snap under ice-loaded panels, and keypad entry systems seize. Those events create multi-day backlogs for less focused shops, but our Dallas crews are structured for surge work.
Pricing for Electric Gate Repair in Dallas, TX
A keypad replacement in Dallas runs $145 to $225. A safety sensor repair runs $160 to $260. Gate motor repair typically falls between $180 and $340, and a control board replacement on a Viking or Ghost Controls operator usually costs $220 to $430 depending on the board. Full operator replacement on a townhome slide gate in Oak Lawn or Uptown often lands between $1,400 and $2,800 including labor, and we’ll quote the exact number before ordering any parts. Estimates are free, and the written price is placed in your hand before work begins. Call (626) 649-4572 for a straight answer on your specific gate.
We Also Serve Cities Near Dallas
Our Dallas crews also cover Irving, Duncanville, Balch Springs, and Mesquite, which means the same Electric Gate Repair team that knows Blackland Prairie clay can be at your gate in the next ring of suburbs. If your gate is in one of those cities, the same written price, the same drop cloths, and the same 365-Day Done Right Promise apply. We’re simply the Dallas gate specialists who happen to cross the city line.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Dallas
Because your gate posts sit in Blackland Prairie expansive clay, which swells after rain and contracts during drought on a seasonal cycle. The soil movement pushes posts out of plumb every year, so realignment is a recurring repair in Dallas, not a one-time fix. Call (626) 649-4572 and we’ll check whether your specific gate needs re-setting or a more permanent footing solution.
Often yes, if the operator’s gearbox and motor are sound and only the control board or keypad is failing. Retrofit boards and receiver kits keep many 15 to 25 year old Viking, Ghost Controls, and Elite units running for years. We’ll give you the retrofit-versus-replace number before any work starts, and you’ll never be pressured toward the more expensive option.
In Dallas, the ground is the first suspect. Clay movement tilts the concrete pad under the operator housing, which throws the drive wheel out of alignment with the rack and pinion, so the gate stalls even when the motor tests perfectly fine. We shim and re-level the pad first, then test the motor under load. A typical visit for this runs $180 to $340. Call (626) 649-4572 for an exact quote.
They do, and February 2021 and the freezes since have proven it. Ice builds on gate panels and adds hundreds of pounds of load, cracking circuit boards, snapping frozen hinges, and seizing automated locks and keypads. If your gate failed after a freeze, we can diagnose the board and hinges the same day we arrive, with parts already moving through our Dallas-Fort Worth office.
Yes, and this is one area where older Dallas gates fall behind. Gates installed before modern UL 325 standards often lack the photo eyes and contact edges that stop a closing gate when a child, pet, or car is in its path. We can retrofit entrapment protection onto most existing operators, and we’ll explain what your specific gate needs before quoting anything. Call (626) 649-4572 and a live person answers around the clock.
If your electric gate in Dallas is grinding, binding, or dead, call (626) 649-4572 now. You’ll get a live person, a free estimate, and a written price before any work begins. If you’re in Oak Lawn, Uptown, Lake Highlands, East Dallas, or anywhere else in the city, we’ll be there with drop cloths, shoe covers, and a cleanup photo before we leave.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Dallas and the surrounding cities since 2009 as part of the Cedarwell family of gate specialists.