Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Windcrest
Gate installation in Windcrest, TX typically costs between $1,400 and $4,800 for a standard single driveway gate, with automatic systems running $2,800 to $7,500 depending on operator type, post conditions, and whether old footings can be reused. Most Windcrest homeowners have gates that are 50 to 70 years old, which means the real work is often in the post footings and the operator retrofit, not just hanging a new panel. We’ve installed and repaired gates on nearly every street in Windcrest, from the ranch homes off Midcrown Drive to the larger lots near Windcrest Country Club. Call (626) 649-4572 and we’ll have a technician out, usually within 48 hours, to give you a written price before anything is ordered or built.
Windcrest’s housing stock is unusual: it’s a self-governing enclave surrounded entirely by San Antonio, developed almost completely between the 1950s and 1970s. That means your gate probably isn’t like gates in newer San Antonio subdivisions. The Gate Installation work here involves older ornamental iron, legacy operators, and soil that actively shifts posts. We account for all of that before we quote.
Why Latch & Post Gate Repair Is Windcrest’s Preferred Gate Installation Company
Latch & Post Gate Repair is part of the Cedarwell family of independently owned and operated gate specialists, and we’ve been working on Windcrest gates since 2009. Cody Beckman leads our team, and the approach he built the company on is simple: name the price in writing, protect the house while we’re there, and stand behind the work for a full year. Around Windcrest, that has earned us a reputation for showing up when we say we will and for leaving the job site cleaner than we found it.
Windcrest homeowners tend to ask the same two questions on every call: “What’s this going to cost?” and “Are you going to leave mud on my floors?” We answer both before the technician ever steps out of the truck. Every visit starts with a written price. Shoe covers go on before we walk inside, and drop cloths go down before any work begins. When the job is done, we take a photo of the clean-up and show it to you. That’s not an upsell. It’s the Cedarwell Care Promise, and it applies to every single job in Windcrest, from a simple pedestrian gate replacement near Takas Park to a full driveway gate install off Crestway Drive.
Because Windcrest is small and we’re dispatched from the brand’s San Antonio office, response times are tight. Most service calls in Windcrest are scheduled within two business days, and emergency calls are handled around the clock by a live person, never a voicemail queue.
Automatic Gate Installation in Windcrest
Automatic Gate Installation in Windcrest starts with an honest look at what you already have. Homes built here in the 1950s through the 1970s often have gate operators that predate modern safety standards. Many of those control boards, particularly older Linear and FAAC units, can’t accept photo-eyes or proper entrapment sensors. When that’s the case, repairing the board isn’t the right answer. Re-driving the gate with a new operator is. A new automatic gate system in Windcrest, including operator, photo-eyes, and labor, typically runs $2,800 to $7,500. The exact number depends on gate weight, post condition, and whether we need to pour new footings.
Legacy Operator Retrofit
Pre-UL 325 operators are common in Windcrest, and they’re worth addressing before the gate fails. If your operator is from the 1990s or earlier, it likely can’t be upgraded to include entrapment protection. We’ll check the model, the wiring, and the panel weight, then tell you plainly whether a retrofit is realistic. Sometimes it is. Sometimes replacement is cheaper than chasing parts for a board that hasn’t been manufactured in twenty years.
Post and Footing Replacement
The operator isn’t the only thing that ages. In Windcrest, the real culprit is often the post footing. Bexar County black clay expands when wet and contracts during drought, which slowly lifts and rotates gate posts. An automatic gate mounted on a plumb post runs quietly and closes evenly. An automatic gate mounted on a shifted post strains the operator and wears out hinges faster. We check the post before we touch the operator.
Gate Installation Services in Windcrest
Gate Installation Services in Windcrest cover everything from a new pedestrian gate for a side yard to a full double driveway gate with an operator. The homes here are predominantly mid-century ranch construction, and many still have their original ornamental iron. That iron is often worth keeping. We’ll weld-repair rust perforation, replace hinge posts, and re-hang the original panel when the steel is sound. When it isn’t, we’ll tell you and give you a price for a new gate built to match the neighborhood’s look.
A standard single driveway gate replacement in Windcrest, including removal of the old gate and installation of the new one, runs $1,400 to $4,800. Double gates and sliding gates run higher because of the added hardware and alignment work. We give you the exact figure in writing before any material is ordered.
Driveway and Double Gates
Driveway gates in Windcrest take a beating from the clay soil and the heat. We set posts deeper than code minimums where the soil profile calls for it, because we know a gate that’s plumb in March can be out of plumb by August. Double gates need matched hinges and a center stop that holds up. We handle both.
Pedestrian and Security Gates
Side-yard pedestrian gates are often the original ornamental iron from the home’s construction. If the panel is straight and the welds are intact, we can replace the posts and hinges and give it another fifty years. If you want a security gate with a keypad or intercom, we’ll spec that too, with the wiring run cleanly and protected from Windcrest’s summer heat.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Windcrest
Our technicians are factory-trained on the brands Windcrest homes actually have: FAAC, BFT, Linear, and Viking, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. We carry common parts for these operators on the truck, which means most Windcrest service calls are resolved on the first visit. When a control board is obsolete and parts are no longer manufactured, we’ll say so and show you the replacement options. No one benefits from a technician who pretends a dead board can be revived.
Common Gate Installation Problems We See in Windcrest Homes
- Clay-driven post heave: Windcrest sits on Bexar County’s expansive black clay, and the drought-rain cycle moves gate posts laterally and vertically. A gate that won’t latch usually has a post that’s no longer plumb, even if the panel looks straight.
- Legacy operators without entrapment protection: Pre-UL 325 control boards are common in Windcrest’s 50-70 year old gates. They can’t be retrofitted with photo-eyes, so the honest fix is a new operator, not a board swap.
- Weld fatigue at the hinge post: Original ornamental iron fails at the welds near the hinges, not mid-span. That’s why a Windcrest gate sags at the pivot and scrapes the ground even when the panel itself is clean of rust.
- Pre-December rush damage: Windcrest’s Holiday Lighting Contest brings a surge of gate repair calls every October and November. Residents fixing up their exteriors discover operators that have been silent all year, corroded hinges, and rust that needs attention before the judging starts.
Pricing for Gate Installation in Windcrest, TX
A single driveway gate installation in Windcrest runs $1,400 to $4,800. Automatic systems typically run $2,800 to $7,500, including the operator, safety photo-eyes, and the labor to hang and calibrate everything. Pedestrian gate replacements usually fall between $650 and $2,200. The largest variables are post condition and gate weight. If the old post footings are cracked from clay movement, we pour new ones. If the gate is heavy ornamental iron, the operator needs more torque, and the price reflects that. You’ll see the full line-item quote in writing before we order anything. Never a surprise. Call (626) 649-4572 for a free estimate on any gate installation in Windcrest.
We Also Serve Cities Near Windcrest
Latch & Post Gate Repair serves Windcrest and the surrounding Texas cities. If you have a property in Houston, San Antonio, Dallas, or Fort Worth, the same written-price promise and 365-Day Done Right Promise apply. Our Gate Installation specialists work across Bexar County and beyond, and we treat every home the way we’d treat our own.
Serving Windcrest, TX - Our Local Coverage Area
We’re based in the Windcrest area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Windcrest
The sag is almost always at the hinge post, not the panel. Windcrest’s 50-70 year old ornamental iron typically fails at the original welds near the hinges, and Bexar County clay movement shifts the post footing out of plumb. The panel often looks straight because it is. The post is what moved. We check the post’s plumb and the footing’s condition before we touch the panel. Call (626) 649-4572 and we’ll diagnose it properly.
In many Windcrest homes, the answer is no. Pre-UL 325 control boards from older Linear, FAAC, or BFT operators can’t be retrofitted with entrapment protection like photo-eyes. When retrofitting isn’t possible, we re-drive the gate with a new, compliant operator. It’s usually cheaper than patching a board that can’t meet today’s safety requirements. We’ll show you the exact price for either option.
Because Windcrest sits on Bexar County’s expansive black clay, and its housing stock is concentrated in a uniform 1950s-1970s age band. The shrink-swell cycle, drought followed by heavy rain, heaves post footings out of plumb season after season. Newer San Antonio subdivisions have mixed soil profiles and younger gates, so the failure pattern is far less consistent. In Windcrest, it’s almost every house.
If the panel is straight and the rust is limited to the welds near the hinges, repair is usually the better answer. We weld the perforation, replace the hinge post and footing if needed, and re-hang the original gate. It preserves the home’s character and costs less than a new custom panel. If the rust has thinned the steel broadly or the gate is visibly warped, replacement is the honest call. We’ll show you both prices and let you decide.
No. Windcrest summers regularly exceed 100°F, which accelerates lubricant breakdown and causes older operator components to fail sooner than in cooler climates. Steel frames also warp at welded joints under sustained heat. Newer operators with sealed control boards and higher temperature ratings fare better. We factor Windcrest’s heat into our operator recommendations so you don’t replace the same part twice. Call (626) 649-4572 for a consultation.
On a 1963 ranch in Windcrest’s Ridgeway Drive area, our crew pulled a sagging swing gate that had been hung on its original cast hinge post. The post footing had lifted and rotated from clay movement, and the operator’s obsolete control board no longer accepted a safety photocell. We replaced the footing and hinge post, set the existing panel back to plumb after minor weld repair, and paired it with a new LiftMaster operator with functioning photo-eyes, keeping the original ornamental iron rather than replacing it. That’s the kind of work Windcrest’s homes call for, and it’s the kind we’re built to do.
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on. If your Windcrest gate needs installation, repair, or an automatic operator, call (626) 649-4572. A live person answers, day or night, and the estimate is free.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Windcrest and the surrounding area since 2009.