Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Paterson
When your electric gate stops working in Paterson, it’s rarely a simple fix you can put off until Friday. Our techs know the city’s rowhouses and narrow side yards, and we carry the parts to get a LiftMaster FAAC or Linear operator running again, usually in one visit. Most standard motor repairs in Paterson run between $220 and $480, and you’ll see the exact number in writing before we touch anything. Call (626) 649-4572 any hour, and a live person answers.
We’re not a handyman service that takes a guess at a gate. Latch & Post Gate Repair is a Cedarwell-family gate specialist focused only on gates: repair, installation, and electric gate repair. Every gate comes down to two parts – the latch that holds it and the post that carries it. That’s the job we focus on.
Why Latch & Post Gate Repair Is Paterson’s Preferred Electric Gate Repair Company
Paterson homeowners tell us the same thing again and again: other companies send someone who stares at the gate for twenty minutes, says the whole thing needs replacing, and leaves without a quote. We’re different because we start with a written price before any work begins. Every single visit. No pressure to accept, no invoice bigger than the number you approved.
The crews who work Paterson are background-checked and uniformed, trained on the Cedarwell C.A.R.E. values we built in 2009. Clean up like it is our own home. Ask before we move or touch anything. Respect the family’s time and quiet hours. Explain the price before the work. It’s not a slogan; it’s a checklist our techs actually follow, which is why Paterson families with kids and pets keep calling us back.
We dispatch crews to Paterson from our metro office in New York City, and we answer the phones around the clock. If your gate fails at 11 p.m. on a Wednesday, a real person picks up. Not a recording.
Automatic Gate Repair in Paterson
Automatic gate repair in Paterson usually means one of three things: a swing gate that binds against a brick wall and stalls, a slide gate whose rack and pinion have rusted, or an operator that has power but won’t move. On most Paterson rowhouse lots the swing arc is tight, and the hinge pier has been pulling away from the house for decades. We correct the gate geometry first, then repair or replace the motor so the repair lasts more than a season.
Most automatic gate repairs in Paterson run from $240 to $560 depending on whether we’re replacing limit switches and a gearbox or correcting a sagging frame at the same time. You’ll get a written price before we start. If the repair isn’t right, our 365-Day Done Right Promise means we make it right. No argument, no fine print. That matters in Paterson, where the masonry gate posts are often older than the people living behind them.
The rowhouse hinge problem
Paterson’s two- and three-family brick rowhouses from the 1890s through the 1930s almost always have gate posts set into old brick or brownstone pillars with lime mortar that is now soft and crumbly. A standard surface-mount hinge bracket works fine in the suburbs, where the post is a 4×4 set in concrete. Here, the through-bolts pull out. We lag through into the pillar with epoxy and set a new steel hinge post beside the old pier when the brick can’t hold anymore. That’s the difference between a repair that lasts and one that fails again before winter.
Slide gates on dead-end lots
If your driveway dead-ends at a parking pad rather than running straight through to a rear garage, a swing gate usually has no room to arc. We convert these to slide gates, keeping your existing operator where possible. We service Electric Gate Repair jobs of all types, and slide gate conversions are common on Paterson’s narrow side-yard lots.
Electric Gate Motor in Paterson
Electric gate motor repair in Paterson is usually triggered by one of two conditions: a motor that strains and strips its gearbox because the gate is binding against settled masonry, or a motor that shorts and quits because the operator was mounted in a low spot that holds water after a storm. We diagnose both on site, and most motor repairs in Paterson are quoted between $280 and $520 including the new gearbox or capacitor where needed.
We don’t replace a motor when the problem is actually the gate frame. That’s a hallmark of gate companies that sell parts instead of fixes. Our techs run the operator with the gate disengaged first, so we know whether the motor is weak, the gate is heavy, or the limit switch is lying. Then we repair what’s actually wrong. This is one of the reasons Paterson homeowners with old brick piers and settled gates get a written price they can trust.
Operators in the floodplain
Homes on the low-lying blocks near the Passaic River, especially after Hurricane Ida in 2021 and the smaller floods before that, deal with ground hinges and bottom rails that sit in standing water. We see electrolysis on the control board connectors, rust inside the rack and pinion, and capacitor failures that happen after every heavy rain. For homes in this part of Paterson, we recommend a raised operator mount and a sealed control box where the existing setup allows it, which cuts the flood-repair cycle considerably.
Brands we repair
in Paterson
Our techs are factory-trained on Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, and Mighty Mule. We stock common control boards, remote transmitters, and safety sensor kits for these brands locally, so most Paterson repairs don’t wait on a shipped part. It’s not about loyalty to one brand. It’s about having the right part the day the gate quits.
Trusted Brands We Service in Paterson
We repair and install Electric Gate Repair in Paterson equipment from brands families actually own. DoorKing and Viking operators show up on many of the commercial steel gates on Main Street and Market Street. Linear and Ghost Controls are more common on residential swing and slide gates across the older rowhouse neighborhoods. We stock local parts inventory for these brands, which means faster turnaround for Paterson customers. When a repair is covered by the 365-Day Done Right Promise, we make it right without a debate.
Common Electric Gate Repair Problems We See in Paterson Homes
- Hinge piers that have settled out of plumb. The original lime mortar in 1890-to-1930 brick rowhouses absorbs water, freezes over the winter, and heaves the pillar slightly each year. The gate binds, the operator strains, and the gearbox strips if nobody corrects the geometry first.
- Side yards too narrow for a swing arc. When the driveway is six to eight feet wide and the gate panel is nearly as wide, any pier movement at all causes the gate to bind against the house wall or the neighbor’s brick. The operator stales and eventually fails.
- Water in the operator and ground track. Low-lying blocks near the Passaic River floodplain leave slide-gate bottom rails, ground hinges, and operator housings in standing water after storms. The rack rusts, the pinion wears unevenly, and the control board shorts.
- Wrong gate type for the lot. On dead-end or parking-pad lots, a swing gate simply has no room to arc. It doesn’t matter how good the operator is. The gate types must match the lot, or the repair never stops.
Pricing for Electric Gate Repair in Paterson, NJ
Most electric gate repairs in Paterson fall between $180 and $560. A simple limit switch adjustment or remote reprogramming runs $120 to $190. A replacement control board for a LiftMaster or Viking operator typically runs $280 to $400. A gearbox replacement on a strained swing gate motor usually runs $320 to $520, including labor. A full slide gate rack replacement in the floodplain areas runs $450 to $650 because of the corrosion typically involved. Every quote is written before any work starts, and you’ll see the exact number. Estimates are free.
We Also Serve Cities Near Paterson
Besides Paterson, our electric gate repair teams regularly work in nearby North Bergen, Union City, Newark, and Jersey City, including commercial security gates on storefront blocks and residential slide gates on older suburban lots. If you’re a Paterson homeowner who works in Newark or has family in Union City, we can schedule around your day.
Serving Paterson, NJ - Our Local Coverage Area
We’re based in the Paterson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Paterson
Yes, but the gate type depends on the driveway layout, not preference. Seven feet is wide enough for a slide gate on almost any lot, and wide enough for a swing gate only when the driveway continues straight through to a backyard garage at the rear lot line. On dead-end or parking-pad lots, we convert to a slide gate, keeping the same LiftMaster or FAAC operator when possible. The gate configuration follows the lot. Call (626) 649-4572 and we’ll tell you what fits before quoting a price.
On Paterson’s rowhouse lots, the hinge post is usually set into old brick or brownstone with soft lime mortar. As the pier settles, the hinge side drops slightly, and the gate pivots down and out, which reads as a sag in the middle of the leaf. The hinge hardware is usually fine; the pier is the problem. We lag a new steel hinge post into the brick with through-bolts and epoxy, set a proper post footing beside the old pier, then remount the gate. The sag disappears because the hinge side is finally stable.
Water is likely entering the operator housing or the ground track, shorting the control board or capacitors. Homes near the floodplain experience this on a cycle. We inspect the control board, rack, pinion, and ground hinge for rust and electrolysis. In many cases we can raise the operator on a new concrete pad, seal the control enclosure, and replace the corroded rack so the gate survives the next storm. Call (626) 649-4572 for an exact quote; estimates are free.
Yes. A live person answers calls at all hours, including holidays. We know that on Main Street and Market Street a broken security gate locks a business owner out at opening time. Our crews carry control boards, remotes, and photo eyes for DoorKing and Viking commercial operators, so many overnight calls are resolved before morning. Call (626) 649-4572 and describe the failure; we’ll tell you honestly whether we can get to you tonight or first thing in the morning.
We test the photo eyes, contact edges, and force settings on every repair visit. A properly working safety system stops and reverses the gate when it meets resistance or breaks the sensor beam. Many Paterson gates were installed decades ago with no contact edges at all, which is dangerous around kids and pets. We add safety edges and re-check the operator’s reverse force, so the gate stops if someone steps into the path. It’s part of the written repair plan, always included.
For electric gate repair in Paterson, call Latch & Post Gate Repair at (626) 649-4572. You’ll get a written price before any work starts, a live person on the phone at any hour, and a tech who treats your rowhouse sidewalk and your floors like their own. Free estimates, no pressure.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Paterson with electric gate repair since 2009.