Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Paterson
A new Gate Repair - Paterson driveway gate typically runs $1,800-$5,200 installed, depending on whether we’re anchoring into old brick pillars or pouring fresh concrete footings. In the tight side yards off 21st Avenue and along the Passaic River blocks, the real work isn’t hanging the gate panel. It’s rebuilding the post so it doesn’t lean six months later. That’s what we focus on. Call (626) 649-4572 and we’ll come out, look at your pillars and driveway width, and hand you a written price before any work starts.
We work throughout Paterson weekly, so we know the difference between a gate on a wide Eastside lot and one squeezed into a 9-foot shared driveway near Main Street. If your gate post is crumbling, your driveway is narrow, or your yard sits in a flood-prone block, the installation has to be planned differently. We plan it that way from the first visit.
Why Latch & Post Gate Repair Is Paterson’s Preferred Gate Installation Company
Paterson homeowners call us for a specific reason: we treat the post and the latch as the job, not the afterthought. Every gate comes down to two parts, the latch that holds it and the post that carries it. When a post is anchored in 100-year-old lime mortar, as so many are in the city’s rowhouse blocks, a standard installation will sag. We rebuild first, then hang the gate.
Our technicians are background-checked and uniformed, and they work under the Cedarwell C.A.R.E. values. That means shoe covers and drop cloths go down before we step inside, we ask before we move anything, and we take a photo of the clean-up before we leave. If you have kids napping or a dog that startles, we can schedule around quiet hours. The 365-Day Done Right Promise covers the whole installation. If it isn’t right, we make it right, no argument.
Gate Installation Services in Paterson
Gate Installation services in Paterson cover driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates. Most Paterson jobs run $1,800-$5,200 for a complete installation, with the exact number in writing before we begin. What drives the price here is the masonry condition, the driveway width, and whether the gate needs an operator. A simple single pedestrian gate into an existing wood post can land at the low end. A 12-foot sliding driveway gate anchored into a rebuilt brick pillar with a LiftMaster operator runs toward the upper end.
Driveway and Pedestrian Gates
Driveway gates in Paterson are rarely simple. The rowhouse driveways built between 1890 and 1930 are often 9 to 11 feet wide, so a standard swing gate can’t clear a parked car or a neighbor’s fence line. We usually specify a slide gate or a narrow-profile swing for these sites. Pedestrian gates go into the same old brick, so we check the pillar before we quote anything.
Slide, Swing, and Double Gates
A slide gate makes sense on a Paterson shared driveway where swing clearance doesn’t exist. A double gate works where the opening is wide enough and both families need full access. We’ll tell you honestly which fits your site. The written quote names the exact gate type, operator, and footing work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Paterson
Electric Gate Installation in Paterson pairs the gate with an operator that handles the city’s weather and flooding conditions. Expect $2,600-$6,800 for an automatic gate job that includes the operator, safety edges or photo eyes, and the power run. On Passaic River floodplain blocks, we raise the operator and seal the electrical components so standing water doesn’t short them out the way it did during Hurricane Ida in 2021.
Operators for Slide and Swing Gates
We factory-train on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Paterson’s narrow slide gates, a rack-and-pinion Viking or DoorKing operator works well and handles the tight clearance. For swing gates, a Ghost Controls or LiftMaster arm is often the cleaner fit. We match the operator to your gate type, not the other way around.
Safety Edges and Power Runs
An automatic gate in Paterson needs safety edges and photo eyes, especially where kids and pets use the same walkway. We run the power in conduit and keep connections above the likely water line. Before we leave, we test every safety function with you standing there watching.
Trusted Brands We Service in Paterson
We install and service gate operators from LiftMaster, DoorKing, Ghost Controls, and Viking throughout Paterson. If your building already has a FAAC or BFT gate operator, we service those too. For Paterson customers, we keep common operator parts on the truck so a replacement board or safety edge doesn’t mean a two-week wait. Dispatch and scheduling are coordinated from the brand’s New York City office, and our crews serve Paterson locally. Call (626) 649-4572 and a live person will answer, no voicemail, no callback queue.
Common Gate Installation Problems We See in Paterson Homes
- Hinge posts pulling out of lime-mortar brick. The old brick and brownstone pillars throughout Paterson’s rowhouse neighborhoods were set with lime mortar that crumbles with age. A new gate hung on that post sags within months unless we rebuild the footing first.
- Narrow shared driveways that rule out swing gates. Many Paterson side yards and driveway passages are only 9 to 11 feet wide, standard swing gates can’t clear parked cars or a neighbor’s fence line. A slide gate on a rack-and-pinion track usually solves it, but it changes the operator spec.
- Floodplain corrosion and electrical shorts. Gate bottom rails, ground hinges, and operators in low-lying blocks near the Passaic River sit in standing water during heavy weather. Rust and shorted components cycle through these areas far more often than in inland Passaic County towns.
- Working access during the job. On shared driveways, both families need to get in and out every day. We keep one walkway open the entire installation, and we tell you when the driveway will be blocked and for how long.
Pricing for Gate Installation in Paterson, NJ
| Gate Type | Typical Paterson Range |
|---|---|
| Pedestrian gate (existing post) | $700-$1,400 |
| Single driveway swing gate | $1,800-$3,200 |
| Sliding driveway gate | $2,200-$4,200 |
| Double gate | $3,000-$5,200 |
| Automatic/ electric gate (operator included) | $2,600-$6,800 |
What moves the number in Paterson is the pillar work. Rebuilding a crumbling brick post and pouring a proper concrete footing adds $600-$1,200 and it’s the single most important line item on the quote. You’ll see the exact figure in writing before we touch anything. The price we quote is the price you pay, no change order game. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Paterson
Our Gate Installation in Paterson crews also work in nearby North Bergen, Union City, Newark, and Jersey City. If you live just over the city line, the same local technicians handle your gate, with the same written price and the same 365-Day Done Right Promise. Call and we’ll tell you how soon we can be there.
Serving Paterson, NJ - Our Local Coverage Area
We’re based in the Paterson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Paterson
Yes. Most narrow Paterson driveways work best with a slide gate on a track, typically $2,200-$4,200 installed. We measure the clear width, check the pillar condition, and quote a slide or narrow-profile swing gate that fits your exact space. Call (626) 649-4572 for a free measurement.
Usually yes, but not into the crumbled masonry. We remove the failed mortar, set a new steel post in a concrete footing, and rebuild the pillar or anchor to solid brick. That post work typically adds $600-$1,200 and is what keeps the gate from sagging within a year.
Paterson requires permits for electrical work and sometimes for new permanent gate structures, depending on the scope. We handle the permit paperwork for you and build the required safety edges and photo eyes into the quote. We’ll confirm the specific requirement for your block when we measure.
We stage the work so one walkway stays open the whole time. On a two-family rowhouse block off 21st Avenue, we replaced a rusted 12-foot swing gate that had been tearing its hinge post near the party-line driveway. We kept one walkway clear throughout, so both families could still get in and out. We’ll map out access with you before we start.
We’re factory trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Paterson’s narrow slide gates, a Viking or DoorKing rack-and-pinion operator often works best. For swing gates, a Ghost Controls or LiftMaster arm is a clean fit. We’ll recommend the right one for your gate type and driveway width.
If you’re ready for a gate that fits your Paterson driveway, call (626) 649-4572 for a free estimate. We’ll measure, discuss your options, and hand you a written price before we do anything else. No pressure, no surprises. Just a straight answer from someone who knows this city’s gates.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Paterson as part of the Cedarwell family since 2009.