Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Clute, TX
Clute, TX sits five miles from the Gulf shore and directly beside the Freeport petrochemical corridor. That combination of salt air and airborne industrial compounds means gate hardware here corrodes faster than almost anywhere else in Texas. A tubular steel gate post that might last 15 years in Houston can rot out from the inside in under five here. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we work on gates in Clute every week. Call (626) 649-4572 and a live person answers, day or night.
Why Clute Homes Are Different
Clute was built out largely in the 1950s through 1970s to house Brazosport-area petrochemical workers. That left a dominant stock of modest ranch-style homes with aging tubular steel and chain-link fence-and-gate setups now well past their service life. The real challenge is what happens underground. Clute’s soft, alluvial Gulf-plain soil holds water long after it rains, and concrete post footings shift and heave with repeated flood saturation. Gates rack out of alignment even when the hardware itself looks fine.
The climate is unforgiving in a way you won’t find 30 miles inland. Near-daily Gulf humidity, persistent salt air, and standing water after storms corrode gate hardware below grade where it’s invisible. Hurricane Harvey in 2017 put several feet of standing water across many Clute streets, and low-voltage gate operators shorted out everywhere. Our technicians know to always pull the bottom hinge on older Clute properties and inspect the post at grade. The buried section of a tubular steel post typically rots from the inside before the visible part shows any surface rust. A gate can lean or drop with no obvious warning. That’s the first thing we check on every Clute visit.
Our Main Clute Services
Most Clute calls to us fall into one of three areas: a gate that won’t latch or swing, a gate that needs full replacement, or an electric opener that stopped responding. Each has its own Clute page below with local pricing and specifics.
Gate Repair in Clute
A leaning gate in Clute is rarely just a hinge problem. The post below grade is usually the culprit, eaten from the inside by salt and standing water. We dig down, cut out the rotted section, sleeve and reset the post, then rehang the gate square. If your latch seized solid or the gate drags across the driveway after a rain, that’s a typical Clute repair for us. We quote a written price before touching anything and wear shoe covers if we step inside. Gate Repair in Clute
Gate Installation in Clute
New gates in Clute need to be built for this air. We size the post depth for alluvial soil, use galvanized or powder-coated steel where appropriate, and set footings deep enough to ride out flood saturation. A new gate on a Clute ranch home usually replaces a 40- to 60-year-old chain-link or tube-frame setup. We measure, quote a written price, and schedule the work around your family’s routine. Gate Installation in Clute
Electric Gate Repair in Clute
Clute’s humidity and occasional street flooding are rough on low-voltage gate openers. We find corroded control boards, waterlogged junction boxes, and seized actuator arms on a regular basis. Our technicians are factory-trained on Ghost Controls, Viking, DoorKing, and Elite openers, and we carry common parts on the truck for faster turnaround. If your opener stopped after the last storm, call before it damages the gate itself. Electric Gate Repair in Clute
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Clute
We’re factory-trained on the equipment Clute homeowners actually have: Viking, Ghost Controls, DoorKing, and Elite among others. Our technicians stock common replacement boards, remotes, and photo eyes locally, which usually means a one-visit repair. See our brands for the full list.
Pricing for Gate Company in Clute, TX
| Service | Typical range in Clute |
|---|---|
| Gate latch replacement | $95 - $180 |
| Hinge replacement (pair) | $140 - $260 |
| Sagging gate realignment | $120 - $220 |
| Post reset (single post, concrete) | $280 - $440 |
| Tubular steel post replacement due to rot | $320 - $520 |
| Chain-link gate replacement (standard 4 ft) | $240 - $420 |
| Tubular steel gate replacement (standard walk gate) | $380 - $650 |
| Opener control board replacement | $260 - $480 |
| Photo eye alignment/replacement | $110 - $190 |
| Full automatic opener replacement | $650 - $1,200 |
What pushes price up in Clute is usually what we find underground: a post rotted below grade, a footing that has shifted, or a wire run corroded by salt air. You’ll see the exact number in writing before any work begins. No surprises, no pressure.
Neighborhoods We Serve in Clute
We work throughout Clute and the surrounding Brazosport area. Our technicians are familiar with the older ranch sections, the streets near the schools, and the newer developments on the edges of town. Most Clute jobs are reached within a day or two of your call.
- Old Clute (downtown streets off Main)
- Areas near Brazosport ISD schools
- Streets off Highway 288 toward the Gulf
- Clute neighborhoods near Oyster Creek Drive
- Residential streets off Dixie Drive
Service Area – Cities Near Clute
In addition to Clute, we serve the surrounding Brazoria County communities. If you’re a few minutes away in Lake Jackson, TX, Freeport, TX, Angleton, TX, or Alvin, TX, the same Latch & Post crews and the same 365-Day Done Right Promise apply. Call us and a live person will talk through your gate issue.
Serving Clute, TX - Our Local Coverage Area
We’re based in the Clute area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Clute
Most Clute jobs are scheduled within one to two days, and urgent leaning-gate or stuck-open situations are prioritized. Call (626) 649-4572 and a live person will give you a realistic arrival window, not a recording.
Most repairs and like-for-like replacements don’t require anything. If you’re in a neighborhood with an HOA, we can provide written specs before you submit anything. For full new installations, we’ll flag anything we know about local requirements.
Yes. Tell us when you schedule, and we’ll plan the visit around quiet hours where possible. We use quiet tools inside the home, keep pets in mind with every step, and put down drop cloths before any indoor work. A photo of the clean-up is part of every visit.
If your gate is leaning, stuck, or the opener stopped working, call (626) 649-4572 for a free estimate. A live person answers, always. We’ll explain the price before any work starts, protect your floors, and stand behind everything with our 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Clute Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco