Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Clute
Electric gate repair in Clute usually costs between $185 and $520 depending on whether we’re fixing a seized hinge post, a dead control board, or a water-damaged operator. Most jobs here are completed the same day we arrive. Clute’s salt-laden air and soft alluvial soil create gate failures we simply don’t see in drier inland Texas towns, which is why our technicians pull the bottom hinge and inspect at grade on every older Clute property before quoting anything. Call (626) 649-4572 and a live person answers, day or night.
Why Latch & Post Gate Repair Is Clute’s Preferred Electric Gate Repair Company
We’re part of the Cedarwell family of independently owned and operated gate specialists, serving Clute homeowners since 2009. Our technicians know that a gate on Plantation Drive fails differently than one in Richwood or Lake Jackson. The salt, the petrochemical corridor air, the saturated ground: these are not abstract concerns. They’re the reason we stock corrosion-rated hinge pins, marine-grade post sleeves, and replacement control boards for the brands Clute families actually own: Viking, DoorKing, and Ghost Controls among them. Every visit includes a written price before work begins, shoe covers and drop cloths inside the home, and a photo of the cleanup before we leave. Cody Beckman leads our team, and his rule is simple: the gate either works right, or we make it right under the 365-Day Done Right Promise.
Our Electric Gate Repair team answers calls around the clock. No voicemail, no callback queue. When a storm knocks out power or a gate jams open at 11pm, you’ll speak to a person who can dispatch a technician to Clute.
Gate Access Control in Clute
Gate Access Control in Clute covers the keypad, remote receiver, intercom, and safety sensor system that decides who gets in and who doesn’t. The job typically involves replacing a corroded keypad face, reprogramming a receiver after a power surge, or adding a keypad to a gate that never had one. In Clute’s humid coastal air, keypad contacts oxidize fast, and a keypad that works in Angleton can fail here within two seasons. Most access control work in Clute runs $165 to $420 depending on the hardware and whether new wiring is needed.
Keypad and Remote Programming
When a Clute homeowner tells us their keypad works in the morning and quits by afternoon, it’s usually a corroded ribbon cable inside the housing. We bench-test the unit, and if the board is salvageable, we clean and reseal the contacts with a marine-grade coating. If it’s shot, we quote a replacement in writing before we order anything. The price you see is the price you pay.
Adding Access Control to an Older Gate
Many Clute ranch homes built in the 60s and 70s have a gate that predates remote access entirely. We can retrofit a keypad and receiver onto most existing swing gates without replacing the whole operator, as long as the motor itself still has life. On older pre-UL 325 units, we’ll tell you honestly whether retrofitting is worth it or whether a new operator with modern entrapment protection is the safer and cheaper answer.
Commercial Gate Operator in Clute
Commercial Gate Operator in Clute means heavy-duty swing or slide operators on business entrances, fleet yards, and the small industrial properties that sit near the Freeport corridor. These units take a beating here. Salt spray, chemical dust from nearby plants, and repeated flood events shorten a commercial operator’s life dramatically compared to inland Texas. Most commercial operator repairs in Clute run $320 to $900, and a full operator replacement with safety edges and photo sensors runs higher. We quote everything in writing before a single screw comes out.
Slide Gate Track and Rack Repair
The rack and pinion hardware on Clute slide gates collects grit and salt that binds the teeth and ruins the gear within a few seasons. We clean, inspect, and replace worn rack sections, and we recommend a corrosion-inhibiting coating that holds up better against the specific mix of salt and petrochemical particulates in Clute air.
Flood-Damaged Operator Assessment
After standing water from a Brazoria County flood recedes, a commercial operator that got submerged is usually not safe to keep running even if it still powers up. Water inside the motor housing corrodes the windings and can eventually short the unit entirely. We’ll do a full post-flood inspection and give you a straight answer: repair if it’s genuinely salvageable, replace if it isn’t. No fear, no upselling. Just documentation and a written number.
Trusted Brands We Service in Clute
Our technicians are factory-trained on the brands Clute homeowners and business owners actually run: Viking, DoorKing, Ghost Controls, and others. We keep common control boards, remote transmitters, and safety sensors for these brands stocked locally so a Clute repair doesn’t sit for a week waiting on a package. When we quote a DoorKing board replacement, we’re quoting a part we likely have on the truck, not a part we’re hoping shows up Friday.
Common Electric Gate Repair Problems We See in Clute Homes
- The gate sags or leans but the visible hinges look fine. In Clute, the buried section of an old tubular steel hinge post rots from the inside before any surface rust appears. The soil here stays wet for weeks after a storm, and the post fails below grade where nobody looks. We pull the bottom hinge and inspect at grade on every older Clute property because this is the one failure that catches homeowners completely off guard.
- Hinge pins seize solid within a few seasons. The mix of Gulf salt and petrochemical corridor air oxidizes raw steel hinge hardware faster than almost anywhere in Texas. A pin that moved freely two years ago can seize enough to burn out a swing gate operator. We use corrosion-rated replacement pins here.
- The operator works but the gate won’t move. Repeated flood saturation heaves the concrete post footing, racks the gate frame out of square, and makes the operator fight the geometry. Sometimes the operator is fine and the real repair is resetting and anchoring the post. Sometimes the motor burned out fighting a misaligned gate for six months.
- Low-voltage control boards short after water intrusion. Standing water from storms like Harvey gets into the control box and finishes off boards that were already corroding from salt air. Older LiftMaster, Linear, and DoorKing units with discontinued boards are often the ones we have to replace outright, because no amount of board-level repair resurrects a part that’s no longer manufactured.
Pricing for Electric Gate Repair in Clute, TX
Here’s what you’ll typically pay in Clute: a seized hinge pin replacement runs $185 to $285. A keypad or remote receiver issue runs $165 to $320. A motor or control board replacement on a residential operator runs $340 to $620. Full commercial operator work starts around $320 and can reach $900 depending on the unit and safety sensor requirements. You’ll see the exact number in writing before we touch anything. The estimate is free. The cleanup is documented. Call (626) 649-4572 for a quote and we’ll send someone to Clute with the right parts.
We Also Serve Cities Near Clute
We regularly run repairs and installations to Lake Jackson, Freeport, Angleton, and Alvin. If you’re in one of those towns and your gate quit this morning, call the same number and we’ll get you on the schedule just like any Clute job.
Serving Clute, TX - Our Local Coverage Area
We’re based in the Clute area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Clute
The buried portion of the tubular steel hinge post has likely rotted through below grade. Clute’s alluvial soil stays saturated for weeks after storms, and the rot starts inside the post where water sits against bare steel. We confirm it by pulling the bottom hinge and inspecting at grade. Call (626) 649-4572 and we’ll check it the same day.
If your operator is a pre-UL 325 unit without working entrapment protection, retrofitting is usually not worth the cost. Adding modern safety edges and photo sensors to an obsolete control board rarely works, and the board itself has probably been discontinued. A new operator with built-in entrapment protection is often cheaper than a retrofit plus a board repair. We’ll give you both numbers in writing and let the math decide.
Clute combines near-daily Gulf humidity and salt spray with airborne compounds from the nearby petrochemical corridor. That mixture attacks steel at a rate far beyond what Austin or Katy sees. Add flood-saturated alluvial soil and you get a corrosion environment that can kill a gate post or a control board in under five years.
Standing water entered the control box or the motor housing and shorted the low-voltage board. Even if it dried out and worked briefly, internal corrosion usually finishes the unit within weeks. We inspect the board and motor after every flood event in Clute and give you a straight repair-or-replace recommendation with a written price. Estimates are free.
Yes, if the operator still has life in it. Most Clute gates from the 50s through 70s were built before keypad entry existed, but we retrofit keypads and receivers onto nearly any swing gate. If the motor is too far gone, we’ll tell you before you spend money on access control hardware that won’t have anything decent to run.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Clute through the Cedarwell family since 2009.