Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Poulsbo, WA
Gate work in Poulsbo runs into two things most Puget Sound towns don’t deal with at the same time: salt air off Liberty Bay and more than 55 inches of annual rainfall saturating clay-heavy glacial soil. Wood posts rot from the ground up while steel hinges and latches corrode from the outside in, and many 1990s-era cedar gates around town are hitting that failure window right now. We’re Latch & Post Gate Repair, part of the Cedarwell family of gate specialists, and we focus on the latch and the post so your gate closes square and stays that way. Call (626) 649-4572 any hour, and a live person answers.
Why Poulsbo Homes Are Different
Poulsbo’s housing stock splits into three rough bands, and each one fails differently. The older craftsman and mid-century homes near the historic downtown waterfront sit on small lots where gates have been repaired and re-hung for generations, often with whatever hardware was on hand at the time. A few blocks from Liberty Bay, galvanized hinges and post brackets that would last 20 years in a dry inland town can corrode through in under a decade. We’ve switched to stainless or powder-coated aluminum hardware on every bayside job because standard galvanized simply doesn’t hold up to salt-laden air.
The 1990s and 2000s subdivisions built as Poulsbo grew into a Seattle commuter town via the Kitsap Fast Ferry corridor are a different story. Those developments installed cedar-framed driveway and yard gates in large numbers, and those gates are now 20 to 30 years old. The wood looks fine from the top but the in-ground section of the post has been sitting in saturated clay the whole time, and that’s where the rot starts. Rural-acreage lots on the outskirts add another variable: long wooded driveways with farm-style swing gates under constant canopy drip from Douglas fir and western red cedar, where posts never fully dry out between storms.
The clay-heavy Kitsap Peninsula soils also heave and shift through frost-and-saturation cycles, moving posts out of plumb even when the wood itself is still sound. A gate that dragged in January may bind differently by March. That’s normal here, and it changes how we approach a repair: we check the post before we assume the hinge is the problem.
Our Main Poulsbo Services
Most Poulsbo calls to us fall into one of these three areas, and each has its own dedicated page with full pricing and detail.
Gate Repair in Poulsbo
When a gate in Poulsbo stops latching, sags on its hinges, or drags against the ground, we start by asking the question this marine climate forces: has the post itself failed in the saturated soil, or just the hardware? Swollen cedar, rusted hinge pins, and shifted posts are the most common culprits we see, especially within a few blocks of the waterfront where salt air accelerates everything metal. We carry hardware rated for this environment, and we’ll give you a written price before any work begins. Learn more on our Gate Repair in Poulsbo page.
Gate Installation in Poulsbo
A new gate in Poulsbo should be built for wet clay soil and salt exposure, not for a dry inland yard. That starts with the post: proper depth, drainage gravel, and hardware that won’t rust through in eight years on a bayside property. We install wood, steel, aluminum, and vinyl gates sized to the opening and the way your family actually uses the space, and every installation includes a written price, shoe covers, drop cloths, and a cleanup photo before we leave. See what’s involved on our Gate Installation in Poulsbo page.
Electric Gate Repair in Poulsbo
Automatic gates near Liberty Bay take a beating from salt air on motor mounts, chains, springs, and control boards, while out on rural acreage the constant canopy drip keeps everything damp. When an electric gate in Poulsbo won’t open, closes partway, or trips its breaker, we diagnose the operator, the limit switches, and the safety edges methodically. The brands families actually own here are names like LiftMaster, FAAC, BFT, Viking, DoorKing, and Mighty Mule, and our technicians are factory-trained on all of them. Details and common faults are on the Electric Gate Repair in Poulsbo page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Poulsbo
We’re factory-trained on the operators and accessories Poulsbo homeowners actually have: Linear, Viking, Ghost Controls, and DoorKing, among others. Because we stock common parts for these brands, most repair visits are completed on the first trip rather than waiting on a second appointment after parts arrive. See our full line card on our brands page.
Pricing for Gate Company in Poulsbo, WA
Here are the typical ranges we quote for common Poulsbo gate jobs. Your exact price is written down and agreed before we start, every single visit.
| Service | Typical Range in Poulsbo |
|---|---|
| Standard gate-latch replacement | $140 - $260 |
| Hinge replacement (pair) | $180 - $340 |
| Gate post reset (single) | $320 - $520 |
| Gate post replacement (single) | $475 - $725 |
| Full wood gate installation | $900 - $2,200 |
| Full steel or aluminum gate installation | $1,450 - $3,100 |
| Chain-drive operator replacement | $800 - $1,400 |
| Electric gate opener installation | $1,500 - $2,800 |
| Control board replacement | $350 - $650 |
| Safety edge or photo-eye repair | $190 - $380 |
What pushes a Poulsbo quote toward the top of a range is usually the post condition beneath the soil line and how close the gate sits to salt air off Liberty Bay. A post that’s rotted at grade means full replacement rather than a reset, and bayside hardware should be stainless or powder-coated aluminum rather than galvanized. You’ll see the exact number in writing before we touch anything, and the price never changes once agreed.
Neighborhoods We Serve in Poulsbo
We work across Poulsbo and the surrounding unincorporated areas, from the waterfront streets near the historic downtown to the newer subdivisions east of Highway 305 and the rural driveway gates out toward the tree line. Most Poulsbo calls can be scheduled within the same week, and we’ll always confirm a time window before the technician heads your way.
- Historic downtown waterfront and Liberty Bay shoreline
- Finn Hill and the neighborhoods above the bay
- The 1990s-2000s subdivisions around Lincoln Hill
- Rural acreage along Big Valley Road and Lofall
- Lemolo and the Highway 305 corridor
Service Area – Cities Near Poulsbo
While this page focuses on Poulsbo, our crews also cover the surrounding Kitsap communities. If you’re in Silverdale, WA, Kingston, WA, Bainbridge Island, WA, or Tracyton, WA, you’ll get the same written-price promise, the same shoe covers and drop cloths, and the same 365-Day Done Right Promise on every repair and installation.
Serving Poulsbo, WA - Our Local Coverage Area
We’re based in the Poulsbo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Poulsbo
Most Poulsbo gate repairs are scheduled within a few days, and many can be handled the same week you call. We don’t promise a city-specific dispatch time, but we do answer the phone live 24/7, so you can reach a real person at (626) 649-4572 any hour to get on the schedule.
In most cases, replacing or repairing an existing gate on residential property does not need a permit in Poulsbo. New automated gate installations can sometimes trigger review if they affect driveway access or right-of-way, and HOA-governed subdivisions may have their own rules, so we’ll help you sort out what applies to your specific property before any work is quoted.
We cover the full city and the unincorporated areas around it, including the waterfront, Finn Hill, Lemolo, the rural lots north of town, and everything in between. Our technicians are background-checked, uniformed, and guided by the Cedarwell C.A.R.E. values: they clean up like it’s their own home, ask before moving or touching anything, respect your quiet hours, and explain the price before the work.
If your gate is sagging, stuck, or won’t stay latched in Poulsbo, call (626) 649-4572 for a free estimate. A live person answers, the price is in writing before we start, and the work is covered by the 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Poulsbo Customers Say
"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs