Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Kingston, WA
Latch & Post Gate Repair is Kingston’s local gate specialist, part of the Cedarwell family of independently owned and operated gate companies. Homes here sit on large, forested lots with long gravel driveways, and the salt air off Puget Sound works on metal hardware year-round. Whether you need a gate fixed, a new driveway gate installed, or an electric operator repaired, call (626) 649-4572 and a live person answers, day or night.
Why Kingston Homes Are Different
Kingston isn’t the kind of town where gates are decorative. This is the western end of the Kingston-Edmonds ferry route, and many residents commute to Seattle by boat on fixed early-morning and evening schedules. That leaves a lot of homes with driveway gates that open and close twice a day, every day, often on rural wooded properties with gravel drives. Automated gate operators here log some of the heaviest cycle counts in Kitsap County. Actuator motors and limit switches wear out ahead of manufacturer estimates, and when a gate won’t open at 5:40 a.m. with a ferry to catch, it’s a real problem.
Salt-laden marine air from the Sound accelerates oxidation on steel hinges, latches, and automatic operators noticeably faster than in inland towns like Silverdale. Add 55-plus inches of annual rainfall, and cedar gate frames swell and bind seasonally, placing extra mechanical load on operators and posts with every wet-season cycle. A gate that worked fine in August can start straining its motor by November. Kingston’s housing stock, from mid-century cottages originally built as summer retreats to commuter-era construction from the 1980s and 2000s, means we see a lot of swing-arm and slide driveway gates rather than small ornamental pedestrian gates. These are working gates on working properties.
Our Main Kingston Services
Most Kingston homeowners call us for one of two things: a gate that stopped working, or a gate they don’t have yet. Here’s what each involves, with links to the full Kingston pages.
Gate Repair in Kingston
When a gate stops latching, sags on its hinges, or drags across gravel, the fix usually comes down to that two-part system every gate shares: the latch that holds it and the post that carries it. In Kingston, salt air corrodes steel hinges and latches faster than inland, and wet-season swelling of cedar frames is a common culprit in fall and winter. We stock parts for FAAC, BFT, and Linear operators on our trucks so many repairs happen in one visit. You’ll get a written price before any work starts, and a photo of the cleanup before we leave. See the full breakdown on our Gate Repair in Kingston page.
Gate Installation in Kingston
A new driveway gate in Kingston has to handle long gravel approaches, heavy use by ferry commuters, and damp, salty air. We build swing-arm and slide gates sized for the property, set posts deep enough for Kitsap County’s wet soil, and match the operator to the gate’s expected daily cycles, not just its width. Every installation includes shoe covers and drop cloths if we step inside, quiet tools when kids are asleep, and a written quote before the crew arrives. The full scope, from site measure to final walkthrough, is on our Gate Installation in Kingston page.
Electric Gate Repair in Kingston
Electric gate problems in Kingston usually fall into a few patterns: a motor worn out by twice-daily ferry commutes, limit switches that lost their setting after a power blip, or wet-season frame swelling that makes the operator strain against its own gate. We work on FAAC, BFT, and Viking operators daily, and we diagnose the whole system, the motor, the board, the sensors, and the gate itself, before quoting anything. Sometimes the fix is a $40 part and a half hour of adjustment. You’ll know the number before we touch a tool. Details are on our Electric Gate Repair in Kingston page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Kingston
We’re factory-trained on the brands families actually own, including FAAC, BFT, Linear, and Viking. Our trucks carry common boards, limit switches, and hardware for these systems, which means many Kingston repairs are completed same-visit. See our brands for the full list.
Pricing for Gate Company in Kingston, WA
| Service | Typical range in Kingston |
|---|---|
| Gate latch or hinge replacement | $180-$340 |
| Automatic gate opener repair | $240-$500 |
| Gate opener installation | $750-$1,400 |
| Full swing gate installation (single) | $2,500-$5,000 |
| Full swing gate installation (double) | $4,000-$8,000 |
| Sensor or safety loop replacement | $220-$450 |
| Gate frame straightening or reinforcement | $300-$700 |
Kingston’s salt air and heavy operator cycles push prices toward the upper end of these ranges: corrosion means more parts replacement than adjustment, and commuter gates need operators rated for higher cycle counts. Whatever the number, it’s written down and agreed to before we begin. No surprises at the end of the job.
Neighborhoods We Serve in Kingston
We cover all of Kingston, from the waterfront homes near the ferry terminal to the large wooded lots off Miller Bay Road, West Kingston Road, and South Kingston Road. Rural properties with long gravel drives are a specialty, since gates there work harder and see less service attention. We typically schedule Kingston visits within 24 to 48 hours for non-emergency work, and our Seattle office dispatches crews locally.
- Kingston waterfront
- Miller Bay Road corridor
- West Kingston
- South Kingston
- Eglon
Service Area – Cities Near Kingston
Our Kingston crews also serve nearby communities across Kitsap County and the north end of the Sound. If you’re in Poulsbo, WA, Edmonds, WA, Mountlake Terrace, WA, or Lynnwood, WA, we can schedule a visit the same way we do for Kingston, with the same written price and cleanup promise.
Serving Kingston, WA - Our Local Coverage Area
We’re based in the Kingston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Kingston
For non-emergency gate repairs and installations, we typically schedule Kingston visits within 24 to 48 hours. If a gate is stuck open or won’t close and you need it secured, tell us when you call, and we’ll prioritize it. Call (626) 649-4572 any time; a live person answers.
Most standard driveway gate installations in unincorporated Kitsap County don’t require a building permit, but if your property is in a shoreline zone or a community with HOA covenants, there may be additional requirements. We can tell you what applies to your property during the free site visit.
Salt air on Kingston’s waterfront will always accelerate corrosion, but you can slow it. We recommend marine-grade stainless hardware where possible and annual cleaning and lubrication of hinges and latches. We’ll show you exactly what to wipe down and what to watch for, so small problems don’t become stuck gates. Call (626) 649-4572 for an appointment.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kingston Customers Say
"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon