Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Bremerton, WA
Gate repair in Bremerton means working on hardware that’s been fighting Puget Sound salt air for years, often decades. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we handle gate repair, gate installation, and electric gate repair for homes across the peninsula. Most of the gates we see in Bremerton were installed around shipyard-era houses from the 1940s through 1960s, and the marine environment here is unforgiving on metal. Call (626) 649-4572 and a live person answers, any hour.
Why Bremerton Homes Are Different
Bremerton sits on a peninsula with saltwater inlets on three sides. That’s not a scenic detail for us; it’s the working condition every gate in the city lives with. Iron and steel hardware here is exposed to year-round salt fog, not occasional coastal spray, which means hinges, latches, and automatic operators corrode faster than anything you’d find a few miles inland in Silverdale. We regularly open operator boxes in Manette and find internal corrosion on circuit boards that have never seen direct rain. The salt gets in through breathable enclosures and does its work slowly.
The housing stock makes it worse. Much of Bremerton was built during the 1940s to 1960s shipyard boom: Cape Cods, bungalows, and modest ranchers in Manette, Charleston, and the blocks near the naval shipyard corridor. Many original chain-link and wrought-iron gates are now 60 to 80 years old. We find post bases rotted or rusted completely through at the concrete footing line, invisible from above, because salt-saturated ground moisture wicks up into both wood and hollow steel posts. A gate that looks fine sags because the post failed underground. That changes the repair from a hinge replacement to a full post reset, and we quote that difference in writing before any work starts.
Our Main Bremerton Services
Most Bremerton homeowners call us for one of two reasons: a gate that won’t latch or swing correctly, or an electric operator that stopped responding. Installation jobs come third, usually when a homeowner is done fighting a gate that’s past saving. Each service has its own Bremerton page with full pricing and details.
Gate Repair in Bremerton
Most repair calls here start as a sagging gate or a latch that won’t catch. In Bremerton, what looks like a hinge problem is often a post that’s rotted or rusted through below ground level, especially in Manette and the older blocks near the water. We assess the post before we do anything else, because replacing hardware on a failed post just repeats the failure. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we carry common parts so most repairs finish in one visit. Full details are on the Gate Repair in Bremerton page.
Gate Installation in Bremerton
Installation in Bremerton means choosing materials that survive salt fog and 50-plus inches of annual rain. We specify powder-coated steel, stainless hardware, and pressure-treated or rot-resistant wood when a new gate goes in near the water. We also set posts below the frost line and seal the concrete joint so salt moisture can’t wick up into the post. A new gate here has to be planned for marine conditions or it’ll need serious work within a few seasons. The full process and pricing are on the Gate Installation in Bremerton page.
Electric Gate Repair in Bremerton
Electric gate operators in Bremerton fail from moisture intrusion more often than mechanical wear. Rain and salt air work their way into control boards, limit switches, and wiring terminals. We open the enclosure, dry and clean the board, test the battery and transformer, and replace only what’s actually failed. We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we keep replacement boards for the most common Bremerton operators on the truck. See typical repair prices and troubleshooting on the Electric Gate Repair in Bremerton page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Bremerton
We’re factory-trained on the gate brands most Bremerton homes actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common boards and hardware for these brands locally, which is why many repairs finish on the first visit. See our brands for the full list and what we do for each one.
Pricing for Gate Company in Bremerton, WA
| Service | Typical range in Bremerton |
|---|---|
| Gate latch replacement | $95-$180 |
| Hinge replacement (per hinge) | $45-$120 |
| Gate post reset or replacement | $250-$550 |
| Chain-link gate frame repair | $80-$200 |
| Wrought-iron rust repair or weld | $120-$350 |
| Automatic gate opener diagnostic | $89-$150 |
| Limit switch replacement | $120-$220 |
| Control board replacement | $200-$400 |
| Safety sensor alignment or replacement | $90-$180 |
| Privacy gate installation (standard wood or vinyl, 4-6 ft wide) | $1,200-$2,800 |
| Wrought-iron driveway gate installation | $2,200-$5,500 |
| Electric gate opener installation | $1,500-$4,000 |
Salt-air corrosion and failed underground posts push Bremerton repair prices toward the higher end of these ranges more often than in inland Kitsap. You’ll get a written price before we start anything, every time, and that price includes our shoe covers, drop cloths, and cleanup photo. No surprise invoice after the fact.
Neighborhoods We Serve in Bremerton
We work throughout Bremerton and respond to most calls within the same day or next morning, depending on the schedule. These are some of the neighborhoods we’re in regularly:
- Manette
- Charleston
- East Bremerton
- West Bremerton
- Union Hill
Service Area – Cities Near Bremerton
We also serve the smaller communities around Bremerton. If your gate is in Manchester, WA, Tracyton, WA, or Port Orchard, WA, we’ll come to you. Gates on Bainbridge Island, WA get the same marine-salt attention as Bremerton gates do, because the island has the same salt-air problem on all sides.
Serving Bremerton, WA - Our Local Coverage Area
We’re based in the Bremerton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Bremerton
We aim for same-day or next-morning response for most Bremerton repair calls. A live person answers the phone around the clock at (626) 649-4572, so you’ll know exactly when we can be there before you hang up. Installation and new operator work are scheduled with a free measure first.
Most gate repairs and like-for-like replacements don’t need a permit in Bremerton, but new driveway gate installations with electrical runs may. We check current city requirements before quoting an installation, and we’ll tell you if a permit is needed and what it costs. The written price covers everything we know about before work starts.
Yes, and that’s why material selection matters so much near the water. Powder-coated steel, stainless hinges and latches, sealed post footings, and marine-rated electrical enclosures all add years to a gate in Bremerton. We recommend the right materials based on how close your gate sits to the water and prevailing wind, not a generic spec sheet.
If your gate is sagging, sticking, or the operator’s stopped working, call (626) 649-4572. Cody Beckman and the team at Latch & Post Gate Repair answer live 24/7, give you a written price before any work begins, and stand behind every job with the 365-Day Done Right Promise. You keep your floors clean, your kids and pets safe, and your gate working through Bremerton’s worst weather.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bremerton Customers Say
"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs