Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across San Leandro
Gate repair in San Leandro usually costs between $185 and $520 depending on what’s failed, and most hinge, latch, and realignment jobs wrap up in a single visit. We’ve worked the flatlands, the Davis Street corridor, and the marina-side neighborhoods long enough to know exactly what the salt air does to hardware here. If your gate is dragging, seized, sagging, or the operator won’t respond, call (626) 649-4572 for our Electric Gate Repair in San Leandro and a live person picks up, day or night.
We’re Latch & Post Gate Repair, part of the Cedarwell family and operating since 2009. Every gate comes down to two parts, the latch that holds it and the post that carries it. That’s the job we focus on, and we do it with a written price before any work starts, shoe covers and drop cloths inside your home, and a photo of the cleanup before we leave.
Key Takeaways
- Typical gate repair in San Leandro runs $185-$520, with sliding gate work at the higher end due to track and roller wear.
- Homes west of I-880 need stainless or hot-dipped galvanized hardware. Standard zinc-plated hinges and latches corrode in roughly half the time they last inland.
- Same-day service is available for most repairs in San Leandro. Swing gates, latches, and operators are common single-visit fixes.
- We service the brands families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
- The 365-Day Done Right Promise covers every repair. If it’s not right, we make it right. No argument, no fine print.
Why Latch & Post Gate Repair Is San Leandro’s Preferred Gate Repair Company
San Leandro homeowners call us because we answer the phone, and because the technician who shows up knows the difference between a hinge that needs grease and a post that’s rotted below the soil line. Our crews live with this city’s specific problems: the marine layer that keeps wood damp from June through August, the salt air off San Leandro Bay, and the 1945-1965 tract homes whose original gate hardware turned 60 or 70 years old a long time ago.
We carry stainless and hot-dipped galvanized replacement hardware on the truck as standard for jobs west of I-880, because we know what plain zinc plating does here. Most San Leandro repair calls are answered the same day, and many are completed in a single visit with parts already on hand. The Gate Repair in San Leandro team works under the Cedarwell C.A.R.E. values: Clean up like it’s our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work. Cody Beckman leads our crews, and every technician is background-checked and uniformed.
Sliding Gate Repair in San Leandro
Sliding gate repair in San Leandro is a different animal than what you’d call for in the hills; here the flatlands put long, heavy gates on rollers and tracks that eat bearings and collect salt grit. The repair usually means replacing worn rollers, cleaning or rebuilding the track run, addressing rack-and-pinion wear, or diagnosing an operator that’s lost its limit setting. A typical roller-and-track service runs $220-$420, and full operator replacement on a sliding gate lands between $480 and $950 depending on the motor and control board spec.
Track and Roller Wear
Sliding gates in San Leandro’s flatland neighborhoods fail most often at the ground level: rollers flatten, brackets crack, and the track fills with a salty paste of dust and marine moisture. We clean the entire track run, check every roller, and replace only what’s actually worn. Most jobs take about two hours and the gate rolls better than it has in years.
Industrial Slide Gate Service
The logistics yards and food-processing facilities along Davis Street and the I-880 corridor put slide gates through more cycles in a week than a residential gate sees in a year. Rack-and-pinion assemblies wear, V-belts stretch, and operators overheat. We stock high-cycle parts and can schedule maintenance windows around shift changes so the gate is never down when the trucks are moving.
Wrought Iron Gate Repair in San Leandro
Wrought iron gate repair in San Leandro usually starts with a sag: the latch no longer lines up, the gate drags a crescent mark across the concrete, and the operator’s safety photocell keeps tripping. The fix is rarely the panel itself. More often it’s a rotted hinge post footing, seized barrel hinges, or rusted pickets that have weakened the lower rail. Repair work like this typically runs $185-$460, and if we’re rebuilding a post footing or welding in new sections, you’ll see the exact number in writing before we touch anything.
Hinge Post Rot and Gate Sag
On mid-century homes near the bay, the real problem is usually hidden below the grass line: the wood post soaks up marine moisture, rots at the ground, and leans. That leans pulls the top hinge out of line and the gate sags. Repairing only the panel leaves the root cause in place. We reset the post in a galvanized-reinforced footing, then correct the gate’s alignment so the latch works and the operator’s safety beam stays steady.
Rust and Weld Repair
Salt air off San Leandro Bay works its way into paint chips and hairline cracks, and once bare steel is exposed, it starts flaking. We grind out the rust, weld in fresh steel where sections have thinned, and treat the surface before paint. When we’re done, the repair is invisible, and the gate is structurally sound again.
Trusted Brands We Service in San Leandro
Our techs are factory-trained on the boards and motors homeowners around here actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, and DoorKing. San Leandro’s mix of older residential operators and newer smart systems means we stock control boards, remote receivers, photo eyes, and keypads locally so we’re not waiting on a parts truck. If your Gate Repair needs a DoorKing board on a Davis Street warehouse or a Ghost Controls module on a gated driveway near Bayfair, we can usually handle it the first visit.
Common Gate Repair Problems We See in San Leandro Homes
- Seized zinc-plated hinges on bay-facing gates. Salt air strips the plating, the steel underneath rusts and swells, and the gate starts to grind instead of swing. Stainless or hot-dipped galvanized hinges solve this permanently.
- Rotted wood post footings under older swing gates. The flatlands’ persistent marine moisture keeps the ground damp long enough to rot the post at the soil line, which shifts the footing and the gate sags. A deeper galvanized-reinforced footing addresses the cause, not just the symptom.
- Corroded operator control boards on the industrial corridor. Facilities along I-880 and Davis Street see salt-laden grit pack into control enclosures and boards. Components fail early, and entrapment-protection faults trip constantly until the board is replaced and sealed properly.
- Misaligned safety photo eyes from wind shift or post lean. When the gate moves even a quarter inch out of plane, the beam breaks and the gate refuses to close or reverses mid-cycle. We realign the gate, secure the post, and re-aim the eyes so everything keeps working.
Pricing for Gate Repair in San Leandro, CA
Here are honest numbers for San Leandro. Hinge and latch repairs run $185-$320. Gate realignment and sag correction runs $260-$460, depending on whether we’re resetting a post or just adjusting hinges. Sliding gate roller and track work runs $220-$420. Electric gate diagnostics and minor board repairs run $195-$385; full operator replacement on a sliding or swing gate lands between $480 and $950. Every job gets a written price before any work starts, and that number doesn’t change unless we find something structural and you approve the revision first. Call (626) 649-4572 for a free estimate; we’ll tell you over the phone what you’re likely looking at.
We sent our tech out to a 1958 tract home near Davis Street where the original wrought-iron side-yard swing gate had started dragging on the concrete. The panel had been repaired twice before, but we found the hinge post footing crumbling from years of marine-layer damp. We reset the post in a deeper, galvanized-reinforced footing, replaced the zinc-plated hinges with stainless units, and corrected the sag with an adjustable hinge set; now the gate swings clear and the operator’s safety photocell stays aligned. A second call that week took us to an industrial yard off the I-880 corridor where a LiftMaster slide gate operator had a corroded control board and a rack-and-pinion assembly packed with salt grit; we swapped the board, cleaned the rack, and mounted a new loop detector so the heavy-duty slide gate could keep up with logistics traffic. Both jobs stayed dry and functional through the next marine layer.
We Also Serve Cities Near San Leandro
Our San Leandro crews regularly take calls in San Leandro‘s neighboring communities, including San Lorenzo, Castro Valley, Oakland, and Alameda. If you’re just over the city line and your gate has stopped operating, call us and we’ll get you on the schedule the same way we would for a San Leandro neighbor.
Serving San Leandro, CA - Our Local Coverage Area
We’re based in the San Leandro area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in San Leandro
Salt-laden marine air off San Leandro Bay strips zinc plating quickly and exposes bare steel to corrosion, so hardware that lasts 10-12 years in San Ramon or Livermore can fail here in 5-7. The fix is hardware that matches the environment: stainless steel or hot-dipped galvanized hinges, latches, and brackets. Call (626) 649-4572 and ask for a quote with the marine-grade spec; estimates are free.
Start by checking whether the safety photo eyes are aligned and clean; salt haze and dust from dry summer months build up fast here. If the eyes look okay, the issue is usually the operator’s force-sensing circuit or a failing control board. Don’t continue operating a gate that won’t reverse; that entrapment protection is there to keep your kids and pets safe. Call us and a live person will schedule a service visit.
Yes, in almost every case. Most of these gates are well-built steel that outlasts their hardware. We reset the rotted hinge post footing, replace the hinges with stainless or hot-dipped galvanized units, and realign the gate so the latch engages and the operator works cleanly. A typical repair runs $260-$460, far less than a new gate, and you’ll get that number in writing before we start.
Monthly or twice-monthly cleaning of the track run and rack assembly, plus quarterly checks on the operator’s control board and photo eyes. The salt grit along Davis Street and I-880 packs into everything and accelerates wear, so scheduled maintenance is cheaper than emergency calls. We offer maintenance plans for San Leandro commercial properties; ask for the sliding gate maintenance schedule when you call (626) 649-4572.
It depends on your exposure. The marine layer socks in the west side of San Leandro for weeks at a time in summer, and a gate that only sees diffuse light won’t keep a solar battery charged through daily cycles. On the eastern side of the city, solar openers from Ghost Controls or Mighty Mule can work well with a properly sized panel. We’ll evaluate your specific gate, sun exposure, and cycle count before recommending anything, and the recommendation is included in the free estimate.
What Actually Lasts on a San Leandro Gate
The honest truth of living near the bay is that standard zinc-plated gate hardware is the wrong spec for most of this city. Salt-laden air off San Leandro Bay corrodes standard plated hinges, latches, and operator control boards in roughly half the time they last in inland East Bay cities like San Ramon or Livermore. Hot-dipped galvanized or stainless components are the working baseline west of I-880, and we stock those as standard on the truck for any job in the lower flatlands. The city’s marina-district damp also keeps wood fence posts swelling and rotting, which shifts footings and causes gate sag that reappears even after panel-level repair.
Every job gets a written price before any work starts. We lay drop cloths on the floor and put on shoe covers before we step inside; your floors stay clean. We choose pet-safe lubricants where there’s a choice, and we can schedule around nap time if quiet matters. The 365-Day Done Right Promise covers every repair and installation we perform in San Leandro. If it’s not done right, Latch & Post makes it right.
Call (626) 649-4572 for a free estimate, or to schedule a gate repair visit in San Leandro. A live person answers 24 hours a day, 7 days a week.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving San Leandro since 2009.