Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across San Lorenzo
If your gate is sagging, scraping, or the keypad just quit, you want a straight answer and a technician who knows San Lorenzo’s older homes. We’re the Gate Repair team at Latch & Post, part of the Cedarwell family, and we’ve been fixing gates in this community since 2009. Most San Lorenzo repairs get a same-day or next-day visit from us, with a written price in your hand before any tool comes out. Call (626) 649-4572 and a live person picks up, day or night.
Why Latch & Post Gate Repair Is San Lorenzo’s Preferred Gate Repair Company
San Lorenzo homeowners call our Electric Gate Repair in San Lorenzo because we understand the specific way gates fail here. Your house was likely built in the Kaiser Community Homes wave between 1944 and 1950, and the gate hanging on that original concrete footing has probably been swapped out once or twice since then. We know how those original footings settle, we know how the bay fog eats hardware, and we know the county permit path for automatic operators because unincorporated Alameda County has its own process. That’s local knowledge you won’t get from a general handyman app.
Our technicians are background-checked and uniformed, trained on the brands San Lorenzo families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Every visit follows the Cedarwell C.A.R.E. values: we explain the price before the work, we ask before moving anything, we respect quiet hours, and we clean up like it’s our own home. That means shoe covers on, drop cloths down, and a photo of the clean-up before we leave, every single time.
And if something isn’t right, the 365-Day Done Right Promise covers it. No fine print, no argument. A live person answers our phone 24/7, which matters when your gate won’t close at 9pm and the dog is eyeing the street.
Driveway Gate Repair in San Lorenzo
Driveway Gate Repair in San Lorenzo usually comes down to one of two problems: the wood or steel gate swinging on original footings that have cracked and shifted over 60-plus years, or a gate from the 1980s or 90s whose hinges, latch bolts, and operator control boards have simply hit the end of their service life. Most San Lorenzo driveway gate repairs run $180-$420 for hinge and latch work, and $320-$750 when we’re replacing an operator board or adjusting a racked frame. You’ll see your exact number in writing before we start.
Racking Frames and Settled Posts
When the original Kaiser-era concrete footing settles, the gate post leans. Then the gate sags. Then the latch doesn’t line up. We correct the post, reset the hinge alignment, and re-level the operator track if there is one, all without ripping out the original concrete unless it’s actually failed.
Obsolete Operator Boards
A gate installed in the 1980s on an original footing often has a control board that’s no longer supported. If the board is dead, we’ll give you a retrofit number and a replacement number, and tell you honestly which one is the cheaper answer over the next five years.
Gate Welding in San Lorenzo
Gate Welding in San Lorenzo is a service we handle directly, not something we sub out to a stranger. The salt-laden marine fog that rolls off the bay accelerates oxidation on steel hinges, latch bolts, and tubular gate frames faster than you’d see in Pleasanton or Livermore. When a hinge post has rusted thin or a frame member has cracked, welding restores the gate for a fraction of what a new hang would cost. Typical weld repairs in San Lorenzo run $150-$380 depending on the metal thickness and how much area we’re reinforcing.
Corroded Hinge and Latch Reinforcement
We grind back the rust, weld in reinforcement where the metal has thinned, and treat the area so the next marine-fog season doesn’t immediately undo the work. On steel-sleeve and tube gates we can match the original profile so the repair disappears.
Cracked Frame and Post Repairs
When a post has cracked at the base, welding a structural sleeve over the cracked section often buys another decade. We only weld on the house-side of the post face where the work is protected from rain splash, and we’ll tell you if the post is too far gone to save.
Trusted Brands We Service in San Lorenzo
Our technicians are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common FAAC and BFT boards, Linear remotes, and LiftMaster hydraulic arms in local inventory so a San Lorenzo gate operator often gets repaired the same day rather than shipped in. If your gate has a Viking or DoorKing operator that’s been on the house since the 1980s, we can still get most replacement parts, and we’ll tell you when a retrofit is the smarter spend.
Common Gate Repair Problems We See in San Lorenzo Homes
- Settled original footings causing racked frames. The concrete post footings poured during San Lorenzo’s 1944-1950 Kaiser build-out have shifted over decades. When the hinge post leans even half an inch, the gate binds, sags, and the latch misses. We correct this at the post, not by forcing the gate.
- Bay-driven hardware corrosion. Salt-laden fog from San Francisco Bay settles on steel hinges, latch bolts, and tubular frames. We regularly replace hardware that’s rusted through on the outside while looking brand new on the protected side.
- Obsolete 1970s and 80s operator boards. A wave of replacement gates installed during the 1970s and 80s on original footings are now aging out together. Dead control boards and worn hinge posts that no longer meet modern safety expectations are the most common call we take in San Lorenzo.
- County permit confusion on automatic operators. San Lorenzo has no city hall. Automatic gate operators must be permitted through Alameda County’s building department, which catches many homeowners off guard. We handle the county paperwork so you don’t have to guess at setback rules for gates fronting public streets.
Pricing for Gate Repair in San Lorenzo, CA
A standard gate-latch replacement in San Lorenzo runs $120-$220. A complete hinge and post realignment on a typical Kaiser-era driveway gate runs $280-$460. Weld repairs run $150-$380. Operator board replacement and reprogramming runs $320-$750 depending on the brand and whether a safety edge or photocell pair needs replacing. All of these are quoted in writing before any work begins, and nothing gets billed above that number unless you approve it first. Estimates are free, and we never pressure you to take the work.
We Also Serve Cities Near San Lorenzo
Our San Lorenzo crew regularly handles gate repair in Castro Valley, San Leandro, Union City, and Oakland. If you’re just outside the neighborhood boundary, call us anyway. Chances are we have a technician nearby during the week.
Serving San Lorenzo, CA - Our Local Coverage Area
We’re based in the San Lorenzo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in San Lorenzo
Because the concrete post footings poured during the 1944-1950 Kaiser Community Homes build-out have settled or cracked over decades, racking the gate frame even when the hinges and operator are relatively new. We see this every week across the ranch-style lots in Gate Repair in San Lorenzo work. The fix is to correct the sag at the hinge post and re-level the footing, not force the gate into alignment.
Yes. San Lorenzo is unincorporated Alameda County, so automatic gate operators must be permitted through the county building department, not a city hall. Most homeowners don’t expect this because San Lorenzo has no incorporated government. We handle the county workflow, including setback rules for gates fronting public streets, as part of the installation.
San Lorenzo sits close enough to San Francisco Bay that salt-laden marine fog settles on steel hinges, latch bolts, and tubular gate frames regularly. San Lorenzo Creek adds localized ground moisture across the lower-lying sections of the community. That combination accelerates oxidation faster than inland East Bay cities like Pleasanton or Livermore, which is why we recommend annual hardware inspection here, not as an upsell but as a real maintenance need.
Yes, in most cases. An older swing gate from the 1970s or 80s can usually take a photocell pair, a safety edge, and a modern operator board without ripping out the gate. We’ll give you a retrofit number and a replacement number honestly, and if the retrofit is the cheaper answer over five years, we’ll tell you that. Call (626) 649-4572 for a free on-site look.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators in San Lorenzo. We keep common FAAC and BFT boards and Linear remotes in local inventory, so a San Lorenzo gate operator often gets repaired the same day. If your yard has a Viking or DoorKing arm from the 1980s, we still get parts for most models and will tell you when retirement is the cheaper call.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving San Lorenzo since 2009.