Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Alameda
Most gate repairs in Alameda run between $180 and $850, with common fixes like latch replacement on the lower end and full post resets or welded frame repairs at the top. We get to Alameda neighborhoods like the East End, Bay Farm Island, and the Gold Coast quickly because our crews know the island’s streets, its alleys, and its tight Victorian-era driveways. Every repair starts with a written price before we touch a single bolt, and every job is covered by our 365-Day Done Right Promise. If a gate is hanging, seized, or dragging on the concrete off Park Street or Fernside Boulevard, call (626) 649-4572 and a live person answers, any hour, any day.
What sets Alameda apart for gate work is the salt air. This is a true island city, ringed entirely by San Francisco Bay, so even a gate three blocks from the water on a quiet street near Lincoln Middle School sees the same corrosion environment as a pier railing. We treat every gate here as a coastal gate. That changes what hardware we use, how we seal it, and how long the repair actually lasts. A big-box galvanized latch that might hold up fine in Oakland can seize solid here within two wet seasons.
Why Latch & Post Gate Repair Is Alameda’s Preferred Gate Repair Company
We are not a general handyman service that happens to do gates. Latch & Post is part of the Cedarwell family of independently owned and operated gate specialists, and gates are the only thing we work on. Since 2009 we’ve focused on the three jobs that keep a family’s gate working: gate repair, gate installation, and electric gate repair. That focus means we carry the right parts, the right sealants, and the right marine-grade hardware instead of improvising with whatever the nearest hardware store stocks.
Alameda homeowners call us for a specific reason: they want a crew that leaves the house the way they found it. Our technicians are background-checked and uniformed, and they work to the Cedarwell C.A.R.E. values on every visit. We lay drop cloths on the floor and put on shoe covers before we step inside your side yard or garage. We ask before we move anything near the gate. We explain the price before the work. And before we leave, we take a photo of the clean-up and show you. If your kids are napping or your dog is anxious, we can schedule around quiet hours and use quiet tools.
Every call to (626) 649-4572 is answered by a human being. Not a queue, not a voicemail. Nights, weekends, holidays. If a gate has come off its track and your driveway is exposed to the street, you should not have to leave a message.
Commercial Gate Repair in Alameda
Commercial Gate Repair in Alameda most often means sliding gates, cantilever gates, or heavy swing gates on apartment buildings, parking lots, and the small industrial yards along Clement Avenue and the northern waterfront. These gates cycle hundreds of times a day, and in Alameda’s salt fog, the rollers, tracks, and operator arms take a beating that inland commercial gates never see. A typical commercial gate repair on the island runs $450 to $1,400 depending on the operator, the track condition, and whether we are rebuilding the opener or replacing worn hardware.
Track and Roller Overhauls
When a sliding gate starts shuddering or binding, the problem is usually the track, not the panel. Salt air here pits steel rollers and corrodes the track bed, and once a roller seizes, the gate drags and eventually burns out the operator motor. We replace rollers and realign tracks while the gate stays in service, staging the work so employees and tenants still get in and out.
Operator and Safety Edge Work
Automatic commercial gates need working photo eyes and safety edges, and those components fail faster in Alameda’s damp, salty environment. We service operators from DoorKing, LiftMaster, and Viking, and we test every safety circuit before we call the job done. If the gate is not reversing on obstruction, we say so and fix it rather than walking away.
Iron Gate Repair in Alameda
Iron Gate Repair in Alameda is less about the iron panel and more about the hinge posts, the weld points, and the latch hardware that salt air eats through year after year. Most iron gates on the island were built to match the Victorian and Craftsman homes they front, and the good ones are worth repairing even when the bottom rail is pitted. A typical iron gate repair here runs $280 to $700. A full rehang with new powder-coated hardware and rust treatment on a large drive gate can push toward $1,100.
Weld and Rust Repair
The Bay-facing blocks of the Gold Coast and the older streets around Franklin Park see the worst of it. We grind out rust blooms at weld joints, treat the steel, and re-weld before priming and painting to match the original finish. When the corrosion has thinned a hinge barrel, we replace the hinge entirely with a powder-coated stainless unit rather than trying to weld over rust.
Latch and Lock Upgrades
A lot of Alameda iron gates still carry their original or early-replacement latches, and many are now little more than rust inside a housing. We replace them with marine-grade stainless latches that hold up to the island’s fog. For gates with keyed locks, we can match the cylinder to your existing house key so you are not carrying another key around.
Trusted Brands We Service in Alameda
Our technicians are factory-trained on the gate operators Alameda families and businesses actually run, including Linear, Viking, Ghost Controls, and DoorKing. We keep common boards, remotes, photo eyes, and receiver components in our vans, which means a lot of automatic gate repairs on the island get finished in one visit instead of two. If your Ghost Controls opener is beeping and won’t move, or your Viking operator is dead at the keypad, we arrive with the parts to diagnose and usually repair it on the spot. Parts we do not carry arrive within a day or two, and we tell you the timeline before we order anything.
Common Gate Repair Problems We See in Alameda Homes
- Seized latches and hinge pins. Standard galvanized hardware oxidizes within one or two wet seasons in Alameda’s salt fog, even on blocks well inland from the water. The latch freezes, the hinge pin binds, and the gate won’t close or won’t stay closed.
- Hinge posts that settle and rot. On narrow Victorian-era lots, many hinge posts are old and shallow-set, and the post footing shifts over decades of Bay clay and winter rain. The panel looks fine but the gate drags and sags because the post moved.
- Gate frames pitting at the bottom rail. Moisture wicks upward from the concrete or soil, and the salt accelerates it. Bottom rails rust through from the inside out, especially on iron and steel gates that were never sealed at the base.
- Shared driveway access conflicts. Many Alameda homes share a driveway or gate with a neighbor, so the gate has to keep working during the repair. We stage work in halves, keeping one lane open for vehicles and foot traffic the entire time.
Pricing for Gate Repair in Alameda, CA
A standard latch replacement in Alameda runs $180 to $340, and you will see the exact number in writing before we start. Gate realignment runs $220 to $450. Hinge post resets start around $400 and rise if the footing needs new concrete. Iron gate weld and rust repair runs $280 to $700, and full electric gate operator repair runs $420 to $1,100 depending on the brand and the board condition. The island-wide salt exposure is why a $25 hardware-store latch fails fast here; we quote marine-grade parts as the default, and that spec is included in the written price, not added on later. Call (626) 649-4572 for a free estimate. The price is quoted and agreed before any work begins.
We Also Serve Cities Near Alameda
Our crews cover Alameda and the surrounding East Bay. We also handle Gate Repair jobs in Oakland, Piedmont, Emeryville, and Berkeley. If you live just off the island or your business is across the Park Street Bridge, we can still get to you. And if you are reading this from Alameda proper, you can see the rest of our local coverage at Gate Repair in Alameda.
Serving Alameda, CA - Our Local Coverage Area
We’re based in the Alameda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Alameda
Alameda is an island, entirely surrounded by San Francisco Bay, so the salt-laden marine air comes from every direction at once. Neighboring cities only face this exposure on their shoreline blocks; on Alameda, every block is a shoreline block. We spec powder-coated or marine-grade stainless hardware as the default here, the same upgrade usually reserved for oceanfront Marin or Santa Cruz properties. Call (626) 649-4572 and we will quote the right hardware for your gate’s location.
The hinge post has likely settled or rotted at the footing. This is the most common misdiagnosis we see on Alameda’s Victorian-era side lots: the panel is square and sound, but the post underneath has shifted in the Bay clay or rotted below grade. We reset the post and rehang the gate rather than planing down a panel that was never the problem. Most post resets in Alameda run $400 to $700, and the written quote includes everything before we dig.
Yes, as long as we can stage the work in halves. On tight shared driveways, we do not pull the gate off its hinges and block access. We work one side at a time, keeping a lane open for neighbors, delivery trucks, and foot traffic. On a tight shared driveway off Alameda’s Victorian-era side-lot grid, we rebuilt a sagging swing gate this way: reset the settled hinge post, upgraded to powder-coated stainless hardware and a marine-grade latch, and kept one lane open the whole time. Call (626) 649-4572 to schedule a repair that does not shut down your shared access.
Yes. Alameda has one of California’s densest intact concentrations of Victorian and Craftsman homes, and the city’s Historic Preservation Ordinance means street-facing gate replacements in designated historic districts often must match the original design character. We repair or match the existing style rather than swapping in a generic off-the-shelf panel. If a matching gate or hardware order is required, we include the timeline and the design-compliance note in your written estimate before any work starts.
We service Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, and Elite automatic gate operators. Our technicians are factory-trained on these brands, and our vans carry common control boards, remote receivers, and photo eyes so most electric gate repairs on Alameda finish in a single visit. Estimates are free, and the written price covers the parts, the labor, and the clean-up. Call (626) 649-4572 to get one.
Every gate comes down to two parts: the latch that holds it and the post that carries it. That is the job we focus on, and in Alameda, we do it with the salt air in mind every single time. If your gate is sagging, seized, or not closing, call (626) 649-4572 for a free estimate. A live person answers, the price comes in writing before we start, and the 365-Day Done Right Promise covers the work.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Alameda since 2009.