Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across New York City
Gate repair in New York City has to account for what most suburbs never see: LPC landmark rules, hundred-year-old ironwork, shared driveways with almost no clearance, and winters that crack welds. At Latch & Post Gate Repair, we come to your block ready for all of it. The price is written before we start, the crew wears shoe covers and lays drop cloths, and you’ll get a photo of the cleanup before we leave. Cody Beckman leads our team, and every job is backed by the 365-Day Done Right Promise. Call (626) 649-4572 for a free estimate, 24/7.
Why Latch & Post Gate Repair Is New York City’s Preferred Gate Repair Company
We focus on one thing: gates. Latch and post, hinge and weld, operator and safety edge. That narrow focus means we know the difference between a brownstone areaway gate in Carroll Gardens and a shared-driveway slide gate in Queens. Our Gate Repair team arrives in uniform, background-checked and factory-trained on the gate brands most New York City homes actually have: Viking, Ghost Controls, DoorKing, and Elite. We have been part of the Cedarwell family since 2009, and the same care routine follows every visit: written price first, shoe covers on, drop cloths under the work, and quiet tools when the baby is asleep.
New York City customers call us because the roads and the rules are specific here. Parking is tight, gates are old, and the LPC is watching. We plan every job around what the block allows, not what a generic service manual assumes.
Driveway Gate Repair in New York City
Driveway gate repair in New York City often comes down to clearance. Most driveways here are shared, narrow, and cut through rows of brick and brownstone. There is not enough swing radius for a wide gate, and not enough street space to stage a full work van. We arrive with the tools and parts loaded for the job described, and we work within the footprint you actually have. A typical driveway gate repair in New York City runs $280-$620 depending on whether we are resetting a post, re-hanging a panel, replacing hinges, or re-aligning a slide track. The exact number is in writing before we touch a single bolt.
Shared driveway and slide gate work in the boroughs
We regularly repair slide gates on shared driveways in Brooklyn and Queens where a swing gate was never an option. The most common trouble is a spring heave in the track after a freeze-thaw cycle, throwing the gate off its rollers. We reset the track bed, re-level the rollers, and check the safety photocells. If the post footing itself has shifted, we pour and pack a new base so the gate does not drag again next winter.
Brownstone areaway gates
Areaway gates below stoops are the original entry gates in most brownstone neighborhoods. The iron is thin, old, and often rusted through at the hinge. We repair, weld, and re-hang these gates rather than replacing them when the hardware is original, especially in historic districts where replacement requires LPC sign-off.
Gate Welding in New York City
Gate welding in New York City is as much about matching old iron as it is about laying a clean bead. A lot of our welding work comes from the freeze-thaw cycle: water gets into a weld seam, freezes, expands, and cracks it. The gate still hangs, but the joint flexes and eventually fails. We weld-repair on site where access allows, or unbolt the panel and take it to the truck if the sidewalk can’t accommodate sparks. A typical gate welding repair runs $180-$450, with full gate post weld repairs running higher. The written price comes before the first arc.
Cast iron and period-profile welding in LPC districts
In neighborhoods like Park Slope and Greenwich Village, a cracked cast iron gate is not just a welding job. If the block is inside one of New York City’s roughly 150 LPC historic districts, the replacement piece or the repair has to stay period-consistent. We work with ornamental iron shops that can replicate scroll and picket profiles in cast iron, then weld or pin the new work into the original gate. It is slower than a modern mild-steel patch, but it is the right fix and it keeps the LPC off your door.
Roll-down gate weld repairs for storefronts
We also weld-repair motorized roll-down security gates on storefronts in Flushing, Flatbush, and the South Bronx. The failure is usually at the hinge post or the operator mount, not in the panel itself. Road salt and constant cycling eat the welds where the panel connects to the barrel. We repair those joints and check the operator limits so the gate doesn’t tear its own weld again.
Trusted Brands We Service in New York City
Our techs are trained on the brands New York City gate owners actually run: Viking, Ghost Controls, DoorKing, and Elite. We carry common replacement parts, safety photocells, loop detectors, and operator boards for these brands in our local stock, which means fewer return trips and no waiting a week for a distributor in New Jersey. When your gate opens by phone app or keypad, the brain is usually one of these brands. We know their power runs, their limit switches, and their failure patterns in a salt-heavy, freeze-thaw environment.
Common Gate Repair Problems We See in New York City Homes
- Freeze-thaw damage to post footings: water seeps into the concrete around the post, freezes, expands, and heaves the post out of level. The gate starts dragging or the latch stops catching. We see this by late February every year.
- Rusted areaway gate hinges: brownstone and limestone row house areaway gates are often original to the building. The hinge barrels rust through, the gate drops, and the leaf scrapes the bluestone. We weld or replace the hinge and reset the leaf.
- Shared driveway slide gates off their track: a spring heave or a cracked roller throws a slide gate off its rail. The motor keeps pushing and bends the rack. We level the track and re-set the gate before the operator burns out.
- Roll-down security gates that jam halfway: on commercial storefronts, a failed limit switch or a bent curtain slat stops the gate mid-roll, leaving a store half-open all night. We fix the switch, straighten the guide, and reset the operator limits.
Pricing for Gate Repair in New York City, NY
You will get a written price before any work starts on every single visit. No pressure and no surprise line items at the end. Here is what most New York City gate repairs run:
- Hinge replacement and gate re-hang: $160-$380
- Latch and lock repair: $140-$320
- Gate welding, on-site: $180-$450
- Post reset and concrete footing: $350-$800
- Slide gate re-alignment and roller replacement: $280-$650
- Operator or safety photocell repair: $220-$540
Parking, the age of the iron, and LPC coordination can shift the final figure, but the quote you approve is the price you pay. Call (626) 649-4572 for an exact quote. Estimates are free.
We Also Serve Cities Near New York City
Beyond our work across Gate Repair in New York City, we make regular runs to Brooklyn, Queens, Manhattan, and Staten Island. If you’re on the edge of a borough or right over a bridge, call anyway. We will tell you straight whether we can get there today.
Serving New York City, NY - Our Local Coverage Area
We’re based in the New York City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in New York City
No, not in an LPC district. If your block sits inside one of New York City’s roughly 150 historic districts, you need Commission approval before altering or replacing original gate hardware. We can repair and reinforce the existing iron, and if replacement is required, we source period-consistent cast iron that matches the original profile. Call (626) 649-4572 and we’ll tell you whether your address falls in a district before you spend a dollar.
Usually it is not the gate itself. Freeze-thaw cycles push water into the post footing, the ground heaves, and the gate drops. Or a roller cracked and the slide gate rides its rail edge. We check the footing, the rollers, and the track bed before recommending any repair. That way you are not paying to re-hang a gate that will drag again in March.
Yes. We repair motorized roll-down gates on storefronts all over Flushing, Flatbush, and the South Bronx. The failure is usually the operator, limit switch, or hinge post weld, not the panel. We fix the mechanics and leave the curtain rolling straight.
We plan for it. On tight blocks we park the van out of the way and carry in the tools and parts we need for the job described. No lift, no trailer, no taking down a neighbor’s gate to get to yours. That is why we ask good questions on the phone before we arrive.
Often, yes. We can weld cracks and gussets in place when the joint is accessible and the sidewalk allows safe spark control. If the crack is in a hinge or the panel needs repositioning to weld correctly, we unbolt it, weld on the ground, and re-hang it the same day. You will see the price before we strike the first arc.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving New York City since 2009.
If your gate is dragging, rusted, off its track, or locked shut, call (626) 649-4572. A live person answers, 24/7, every day of the year. We will talk through what you are seeing, give you a straight answer on price, and schedule a visit that respects your floors, your kids, and your gate.