Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Felida
Gate repair in Felida usually costs between $180 and $2,400 depending on what failed, and most jobs are finished the same day our technician arrives. The wide range is honest: a bent hinge pin on a cedar gate runs on the low end, while a dead 20-year-old slide operator on a hillside driveway lands higher. We serve Felida with a live person answering calls around the clock at (626) 649-4572, and every repair starts with a written price before we touch a single bolt.
Felida is different from the rest of the Vancouver metro, and we learned that the hard way over years of service calls here. Gates in this community fail differently than gates in flat suburban subdivisions, and the fix is rarely what the phone book version of gate repair would suggest. We know the driveways, the soil, the tree cover, and the hardware that’s lived on these properties since the 1990s.
Why Latch & Post Gate Repair Is Felida’s Preferred Gate Repair Company
We’re part of the Cedarwell family of independently owned and operated gate specialists, founded in 2009, and our focus is narrow: gate repair, gate installation, and our Electric Gate Repair in Felida. That’s the whole job. We’re not squeezing gate calls between fence builds and deck projects. When a Felida homeowner calls us about a swing gate that won’t latch or a slide operator that stalls halfway, the person who answers the phone knows the difference between a Viking control board and a Ghost Controls arm because he works on them every week.
Our technicians are background-checked and uniformed, and we operate under Cedarwell’s C.A.R.E. values on every visit: Clean up like it’s our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, and Explain the price before the work. When we step inside a Felida garage to check a gate operator, we put shoe covers on at the door and lay drop cloths before setting down tools. Your floors stay clean. If kids are napping, we bring quiet tools and move carefully.
We’re also consistent in a way gate repair shops rarely are. The 365-Day Done Right Promise covers every repair and installation we perform. If the gate isn’t right a month from now, we make it right. No argument, no fine print, no “that’s outside the warranty window.” We don’t offer that because it sounds good in an ad; we offer it because a gate that works in August and fails in February is a Felida problem we see every single year, and we want our fixes to hold through the wet season.
Metal Gate Repair in Felida
Metal gate repair in Felida is often about the post and the hinge rather than the gate itself, because the heavy wrought-iron and ornamental steel gates this community favors are heavy enough to punish any slight movement in the ground they hang from. Our Gate Repair team handles hinge replacement, post re-seating, weld and rust repair, lock replacement, and full gate realignment on custom metal gates throughout the Felida area. Most hinge pin replacements run $180 to $420, while a post that needs pulling and re-setting on a deeper concrete footing lands between $600 and $1,800 depending on access and how far out of plumb the post has wandered.
When we weld or grind on a metal gate, we protect what’s underneath and around it. Sparks don’t belong on your paver driveway or against your cedar fence line. We lay welding blankets and grind shields before we start, and we take a photo of the clean-up before we leave. That’s part of the Cedarwell Care Promise, and we don’t charge extra for it.
Hinge and Post Repair
Metal gates on Felida’s sloped driveways put enormous lateral load on the hinge post, especially when the gate is six feet tall and fabricated from quarter-inch steel. When the soil saturates in November and freezes in January, the post tilts outward. The gate starts gapping at the latch, then drags on the driveway apron, then the operator arm starts fighting the geometry. We pull the post, bore deeper, set it on compacted base and concrete, and re-hang the gate so the reveal is even top to bottom.
Weld and Rust Repair
Clark County’s 42 to 45 inches of annual rain combined with Felida’s dense tree canopy means steel gate frames hold moisture longer than they would in open sun. We see rust bloom at the bottom rails and at welds where the finish was broken during installation. We grind back to clean metal, repair or reinforce the joint, and prime and paint so the repair blends. A typical crack weld and repaint runs $200 to $500; a bottom rail that needs replacement steel runs higher.
Wood Gate Repair in Felida
Wood gate repair in Felida usually means the gate has absorbed water, warped, and pulled itself out of square against its own hinges. Heavy cedar and douglas fir gates on these large wooded lots swell in the wet months and shrink in summer, and a gate that swung cleanly in July can bind against the post by December. We rebuild and re-hang wood gates, replace rotted stiles and rails, correct sag with heavier hardware or steel frames, and re-set posts that the saturated Felida soil has pushed out of line. Straightforward sag correction and hinge replacement runs $220 to $600; a full gate rebuild with new cedar boards and a steel inner frame lands between $1,200 and $2,400.
We sand and seal cut edges, use galvanized or stainless fasteners, and choose pet-safe lubricants for hinges where there’s a choice. If your dog noses the gate bottom or your kids swing on it, the parts we install are sized for abuse, not just appearance.
Gate Realignment
A wood gate in Felida that drags or gaps at the top is usually a post issue hiding behind a wood issue. We check the post with a level first, because on a cross-slope driveway the downhill post is often the culprit. If the post is sound, we correct the gate with a turnbuckle and steel frame or re-hang on larger hinges. If the post is soft, that’s a re-set, not a band-aid.
Rotted Rail and Stile Replacement
Felida’s canopy shade means the bottom six inches of a wood gate never fully dries between November and April. We replace the rotted members, scarf in new material where possible, and often inlay a steel flat bar into the bottom rail so the same repair doesn’t come back next spring. You’ll see the written price for the whole job before we begin.
Trusted Brands We Service in Felida
We’re factory-trained on the equipment Felida homeowners actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common Viking and DoorKing control boards, photocells, and loop detector parts on our trucks that serve Felida, so a repair doesn’t stretch into a week waiting for a UPS box. When you call about a Ghost Controls arm that’s lost its limits or an Elite slide operator that shorts on a wet morning, we know the wiring from memory and we’re not learning it on your driveway.
Common Gate Repair Problems We See in Felida Homes
- Cross-slope swing gates that gap by February. Felida driveways run downhill away from the road, so the gate post sits on a slope. Rain-saturated soil and frost-heave tilt the post outward every winter, and the gate that closed dead-level in August suddenly won’t reach the latch. We fix it by re-setting the post on a deeper base, not by adjusting the latch plate and calling it done.
- Slide tracks packed with conifer needles. Felida’s tree canopy drops year-round debris onto driveway gate tracks. Needles pack into the operator’s path, the gate stalls mid-travel, and the motor overheats. We clear the track, repair the damaged rollers and sprocket, and often add a track shield so it drains instead of collecting.
- Corroded pivot pins and control boards from trapped moisture. The same canopy that drops needles also holds humidity against steel pivot pins and circuit boards. We see control boards shorted by condensation and photocells that fail because the wiring behind them has corroded. We replace with sealed connectors and dielectric grease where the location calls for it.
- Operators aged 15 to 25 years reaching end-of-life. Most of Felida’s homes were built between the 1990s and 2010s, and a large share of the gate automation was installed at construction. That hardware is now old enough to vote. We repair what’s repairable and tell you straight when replacement is the better financial call.
Pricing for Gate Repair in Felida, WA
A typical gate repair in Felida runs between $180 and $2,400, with most common jobs falling into the $350 to $900 band. Here’s the honest breakdown: hinge replacement runs $180 to $420, sag correction and realignment $220 to $600, gate operator diagnosis and repair $250 to $850 depending on the brand and the failed part, post re-setting $600 to $1,800, and full gate rebuilds $1,200 to $2,400. The biggest variable is usually the post, not the gate, because Felida’s hillside soil moves and anything that moves needs a deeper footing.
You’ll always see the written price before we start. No pressure to accept, no surprise line items at the end. The quote is the price. Call (626) 649-4572 for a free estimate on any gate repair in Felida.
We Also Serve Cities Near Felida
Our Gate Repair in Felida team works daily in this community, and we also take calls from nearby Felida neighbors in Vancouver, Salmon Creek, Hazel Dell, and Ridgefield. If you’re just over the city line, call us and we’ll tell you honestly whether we can get to you this week.
Serving Felida, WA - Our Local Coverage Area
We’re based in the Felida area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Felida
The gap is almost always the hinge post tilting outward with the soil, not the gate warping. Felida’s driveways run downhill away from the road, so the downhill post sits on ground that saturates every rainy season and heaves with frost. A gate that closed flush in August can gap two inches by February. We re-set the post on a deeper concrete base and the problem stops recurring. Call (626) 649-4572 if yours is doing this.
Yes, and it’s usually the trees. Felida’s conifer canopy drops needles and small branches directly onto slide tracks year-round, and the debris packs into the operator’s path until the motor stalls against the resistance. We clear the track and repair any damaged rollers or sprocket teeth, then often install a track shield. If your gate is stalling, call us and we’ll find the obstruction.
We use a simple test: if the motor runs but the gate doesn’t move, it’s likely mechanical and repairable. If the motor hums, smells burnt, or trips the breaker, the operator is usually done, especially on 15- to 25-year-old units common in Felida’s 1990s and 2000s homes. We’ll tell you honestly which one you have. If replacement makes sense, we’ll show you the numbers side by side before you decide.
At minimum, your automatic gate needs working obstruction sensors like photocells or contact edges that reverse the gate if something or someone is in the path, plus a manual release so the gate can be pushed open if the power fails. Felida’s sloped driveways add a layer of risk because a heavy gate rolling downhill has more momentum. We test entrapment protection on every electric gate repair visit and flag it in writing if a sensor is missing or failed.
Yes, both. Wrought-iron and ornamental steel gates, heavy cedar swing gates, and every mix in between are what we see on Felida’s custom-built properties. Our team works on metal and wood in the same week, often the same day on neighboring streets. Call (626) 649-4572 and describe your gate, and we’ll tell you what it needs.
We were called to a custom home off NW 36th Ave where a 15-year-old LiftMaster swing operator had been tripping its safety photocell all winter. The gate was closing clean but gapping badly by mid-season; our tech found the downhill hinge post had tilted nearly an inch out of plumb from saturated soil, so we pulled the post footing, reset it on a deeper concrete base, and re-leveled the operator arm. After rack and pinion reset and a sag correction on the heavy cedar panel, the gate has closed silently through two full wet seasons since. That’s the kind of fix this page is written around, because that’s the repair Felida actually needs.
If your automatic gate in Felida is stuck, gapping, grinding, or refusing to open at all, call (626) 649-4572 now. A live person answers, day or night. We’ll give you a free estimate and a written price before any work starts.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Felida since 2009.