Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Felida, WA
Latch & Post Gate Repair is a gate company built around one part of the home, and we take care of it in Felida the way the terrain here demands. Felida’s semi-rural lots, long sloped driveways, and heavy cedar and wrought-iron swing gates mean most jobs are not a quick flat-suburb adjustment, they are a measured fix on a hillside post that has moved over the winter. We work on the latch and the post, the automation, and the steel that holds it all together. If a gate is sagging, drifting, or refusing to open after a Clark County rain, call (626) 649-4572 and we’ll give you a straight answer and a written price.
Why Felida Homes Are Different
Felida is not a typical suburban grid. The lots are large, the driveways drop away from the road, and the conifer canopy keeps the ground damp through most of the year. That combination changes how gates fail. A swing gate set on a cross-slope will close fine in August, then gap badly at the latch by February because rain-saturated soil and frost-heave tilt the hinge post outward. Operators on those same slopes work against gravity every cycle, which shortens the life of the gearbox and trips the safety obstruction sensors more often than a flat-lot install ever would.
The housing stock compounds it. Most Felida homes are custom or semi-custom builds from the 1990s through the 2010s, and a large share of owners automated their gates at the time of construction. That hardware is now 15 to 25 years old, which means we are regularly replacing original FAAC, Viking, and DoorKing control boards that have spent two decades in damp, needle-heavy air. Add the annual 42 to 45 inches of rain and the occasional Gorge wind event pushing lateral load through the gate arm, and you get a failure pattern that is distinctly Felida: corrosion at the pivot pins, warped cedar boards, and operators that drift out of level every spring.
Our Main Felida Services
The three calls we take most often from Felida homeowners are for repairs that have become unsafe or inconvenient, new gate installations that fit a sloped driveway, and electric operators that have stopped responding. Each has its own Felida page, because the details matter differently for each one.
Gate Repair in Felida
Most repair jobs in Felida start with a hinge post that has moved, a latch that no longer catches, or a cedar gate that has warped enough to scrape the driveway. The hillside lots and wet winters mean we check the post footing and the gate’s rack before we touch the hardware, because adjusting a sagging gate on a cross-slope without correcting the lean just sets the problem up to return. Gate Repair in Felida covers welded steel frame fixes, post re-setting, and latch and hinge replacement with a written price before any work starts.
Gate Installation in Felida
New gate installations in Felida almost always involve a sloped driveway, which means the post footings, hinge geometry, and operator placement have to be planned around drainage as much as swing arc. We measure the cross-slope, account for how much the soil moves in a wet winter, and build the post set so a new cedar or steel gate closes true in February as well as July. Gate Installation in Felida walks through what a full install includes and what a written, upfront price looks like for your driveway.
Electric Gate Repair in Felida
When an electric gate stops opening in Felida, the cause is often moisture in the control board, a safety sensor that keeps tripping from wind or debris, or an operator gearbox that has been working uphill for too many years. We diagnose the specific failure before quoting anything, and we carry the factory parts for the brands Felida homes actually run. Electric Gate Repair in Felida explains what we check on an operator call and how we handle urgent failures.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Felida
We service and stock parts for the gate operators and hardware Felida homes came with, including Viking, Ghost Controls, DoorKing, and Elite. Because these operators are common in Clark County, we keep board and gear kits close by and can often complete a repair in a single visit. You can see the full list on our brands page.
Pricing for Gate Company in Felida, WA
| Service | Typical range in Felida |
|---|---|
| Gate repair / service call assessment | $79-$149 |
| Hinge repair or replacement (standard steel) | $120-$300 |
| Latch or lock replacement | $90-$250 |
| Cedar or wood gate board replacement (per board) | $40-$90 |
| Adjustment and alignment | $95-$220 |
| Operator or control board replacement (labor only) | $200-$450 |
| Safety sensor replacement or realignment | $110-$280 |
| Full standard gate installation (labor and basic hardware) | $1,800-$4,500 |
| Full electric gate automation installation | $3,200-$7,000 |
Felida’s sloped driveways and heavier custom gates tend to push a job toward the upper end of these ranges, simply because more shimming, longer post work, and a stronger operator are needed to hold a gate level on a cross-slope. Every quote is written down and agreed to before we touch anything, and the price you see is the price you pay.
Neighborhoods We Serve in Felida
We work throughout Felida and the surrounding Clark County hillsides, including communities along NW Lakeshore Avenue, NW 36th Avenue, and the wooded lots near Felida Community Park. Most Felida calls can be scheduled within one to two business days, and urgent repairs are handled as quickly as the schedule permits.
- NW Lakeshore Avenue area
- NW 36th Avenue corridor
- Felida Community Park vicinity
- Salmon Creek hillside lots
- Ridgefield west slope
Service Area – Cities Near Felida
While our crews work locally in Felida, we also serve nearby communities throughout Clark County and the broader metro. You can find gate service in Seattle, WA, Spokane, WA, Tacoma, WA, and Vancouver, WA. Scheduling is coordinated from our Seattle office, and the same Cedarwell Care Promise applies on every job.
Serving Felida, WA - Our Local Coverage Area
We’re based in the Felida area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Felida
Most Felida repairs are scheduled within one to two business days, and we prioritize urgent jobs where a gate is stuck open or a driveway is blocked. Call (626) 649-4572 and a live person will give you a realistic arrival window, not a callback.
Most standard driveway gate installations in unincorporated Clark County do not require a separate gate permit, but some homeowner associations in Felida’s planned communities have their own approval rules for gate style and height. We will flag HOA requirements during the estimate so you do not get a notice after the gate goes in.
We cover all of Felida and nearby Clark County communities, including the Salmon Creek hillsides and the west slope toward Ridgefield. If your gate is outside that immediate zone, call and we will confirm whether our local crews can schedule it or point you to the right nearby service page.
If you have a gate question we have not answered here, call (626) 649-4572. A live person answers around the clock, and we will tell you honestly whether the job is urgent, what it will cost, and when we can be there.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Felida Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco