Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Vancouver, WA
Gate repair in Vancouver means dealing with wind. The city sits at the western mouth of the Columbia River Gorge, and the same geography that gives us beautiful river views also channels easterly Gorge winds straight into residential streets at 50 to 70 mph. Those gusts rack wood gates, pull hinge screws, and drop unlatched panels onto cars and fences. Latch & Post Gate Repair handles gate repair, gate installation, and electric gate repair throughout Vancouver, and we start every job with a written price before any work begins. Call (626) 649-4572 any time, day or night, and a live person answers.
Why Vancouver Homes Are Different
Vancouver’s housing stock tells a specific story. The growth wave from the 1990s through the mid-2000s produced dense tracts of similar suburban homes in Salmon Creek, Hazel Dell, Orchards, and Cascade Park. Most were built with cedar board-on-board privacy fences and matching swing gates, and those gates are now 20 to 30 years old. That means a lot of Vancouver gate work isn’t a one-off fix, it’s a neighborhood-wide aging cycle happening at the same time.
HOA covenants in many of these planned communities mandate specific gate styles. When a cedar picket rots or a vinyl panel cracks, the replacement has to match the existing profile, and some of those profiles have been discontinued for years. Matching what’s already there is part of the job in a way it isn’t in cities with looser design rules. We carry trim stock and salvage matching profiles where we can, and we’ll tell you straight when a gate has reached the point where replacement makes more sense.
The weather compounds it. Vancouver gets roughly 42 inches of rain a year, with moisture hanging around from October through May. Post bases stay wet, ferrous hardware rusts faster than most people expect in the Pacific Northwest, and freeze-thaw cycles each winter crack rails and seize operator gears. In Orchards and Hazel Dell especially, clay-heavy soil holds water against the post footings, so seasonal heaving throws gates out of plumb every few years. The recurring fix there is shimming and re-plumbing the post, not just swapping a latch.
Our Main Vancouver Services
These are the three services Vancouver homeowners call about most. Each has its own detailed page, but here’s what they involve in this city specifically.
Gate Repair in Vancouver
Most Vancouver gate repairs start with either wind damage or a hinge that’s pulled loose from a waterlogged post. We’ll reset the hinges, shim the post back to plumb if it’s heaved, and replace latches and hardware that have rusted through. Cedar gates from the 1990s housing boom often have rot at the post base and bottom rail, and we’ll show you exactly what’s salvageable before we cut anything. On every visit we lay drop cloths and put on shoe covers before stepping onto your property, and we use pet-safe lubricants where there’s a choice. See the full breakdown on our Gate Repair in Vancouver page.

Gate Installation in Vancouver
A new gate in Vancouver has to be built for wind and wet. We set posts deeper than the standard spec where clay holds water, use galvanized or stainless hardware so hinges don’t rust out in three winters, and match the existing fence profile whether it’s cedar board-on-board or vinyl. HOA communities often require a specific style and setback, and we’ll review your covenant before we order anything. You’ll get a written price before the first hole is dug, and the 365-Day Done Right Promise covers the finished gate for a full year. Details are on our Gate Installation in Vancouver page.

Electric Gate Repair in Vancouver
Gorge winds push against the full face of a closed gate, which loads the operator, the hinges, and the limit switches. Vancouver’s wet winters add another layer: moisture gets into control boards, corrodes terminal contacts, and seizes gears on operators that were never rated for constant rain. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, and we’ll tell you whether the fix is a board swap, a sensor realignment, or a full operator replacement before we order a single part. The full story is on our Electric Gate Repair in Vancouver page.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Vancouver
Our technicians are factory-trained on the operator brands Vancouver homes actually have installed: FAAC, BFT, Linear, and Viking are common here, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common boards, remotes, and safety-edge parts stocked for fast turnaround. The full list is on our brands page.
Pricing for Gate Company in Vancouver, WA
| Service | Typical range in Vancouver |
|---|---|
| Gate latch replacement | $120 - $240 |
| Hinge repair or replacement (pair) | $140 - $260 |
| Wood gate repair (pickets, rails, realignment) | $180 - $400 |
| Post re-plumb or shim (single post) | $180 - $350 |
| Vinyl gate crack or panel repair | $115 - $225 |
| Gate wheel or drop rod replacement | $90 - $180 |
| Electric gate operator troubleshooting | $95 - $240 |
| Safety sensor alignment or replacement | $110 - $220 |
| Limit switch adjustment or replacement | $125 - $245 |
| Gate operator gear replacement | $180 - $340 |
Wind and wet push Vancouver pricing toward the upper end of those ranges more often than in drier cities east of the Cascades. Post footings that have heaved in clay soil take longer to re-plumb than a simple hardware swap, and rusted hardware sometimes means drilling old screws out before new ones go in. Whatever the job, you’ll see the exact number in writing before we touch anything, and that number doesn’t change without your okay.
Neighborhoods We Serve in Vancouver
We work across Vancouver every week, from established neighborhoods with 30-year-old cedar gates to newer subdivisions with vinyl and automated systems. Most repairs are scheduled within a few days, and wind-damage calls during the storm season get prioritized where a gate is no longer closing.
- Salmon Creek
- Hazel Dell
- Orchards
- Cascade Park
- Fisher’s Landing
Service Area – Cities Near Vancouver
In addition to Vancouver itself, our crews regularly serve the surrounding Clark County communities. The clay-heavy soil and wind-exposed lots that shape gate work in Vancouver continue into Ridgefield, WA and Battle Ground, WA, while Camas, WA and Washougal, WA sit even closer to the Gorge and get the same easterly wind events, often stronger.
Serving Vancouver, WA - Our Local Coverage Area
We’re based in the Vancouver area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Vancouver
Yes. When Gorge winds hit, we prioritize calls where a gate is hanging from one hinge, lying on the ground, or no longer securing a yard with kids or pets. Call (626) 649-4572 and a live person answers 24/7, nights and weekends included. We’ll get you on the schedule and give you a written price before any repair work starts.
Many Vancouver planned communities, especially around Salmon Creek and Cascade Park, have HOA covenants that specify gate style, material, and sometimes color. If you’re in an HOA, we’ll review the relevant section of your covenant before ordering materials and help you match the required profile. The written price you get before work starts covers that matching work.
Most non-emergency repairs in Vancouver are scheduled within a few days. Wind-damage calls where a gate won’t close are handled as priority, and our scheduling is coordinated from the brand’s Seattle office with crews serving Vancouver locally. When you call (626) 649-4572, a live person answers around the clock and can get you dated on the calendar right then.
If your gate is racked from wind, sagging on a heaved post, or its operator has stopped responding, call (626) 649-4572 for a free estimate. You’ll get a written price from a background-checked, uniformed technician who lays drop cloths, wears shoe covers inside, and leaves you a photo of the clean-up before departing. The 365-Day Done Right Promise covers every repair and installation for a full year.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Vancouver Customers Say
"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick





Before
After
Before
After
Before
After