Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Woodside
A new gate installation in Woodside typically runs $4,800-$18,500 depending on size, material, and automation, and most custom estate gates take 3-6 weeks from measure to final walkthrough. We’re Latch & Post Gate Repair - Woodside, part of the Cedarwell family, and we’ve been building and hanging gates on Woodside’s long private driveways since 2009. If you’re off Canada Road, Mountain Home Road, or up in the hills above Portola Valley Road, call (626) 649-4572 and a real person answers, any hour.
Why Latch & Post Gate Repair Is Woodside’s Preferred Gate Installation Company
Woodside homeowners don’t call a generalist for a 16-foot custom iron gate. They call someone who understands that a gate on a one-acre oak-shaded lot behaves differently than one in a sunny Redwood City cul-de-sac. Our technicians see the same thing on nearly every Woodside job: fog-belt dampness has eaten through mild-steel hinge pins, redwood duff has packed into V-track grooves, and a horse trailer clearance requirement means the gate has to swing wide and true. That’s local knowledge, not guesswork.
We work to the Cedarwell Care Promise on every visit. Written price before any work starts. Shoe covers and drop cloths before we step inside your home or garage. A photo of the clean-up before we leave. Background-checked, uniformed technicians who knock before touching anything and ask before moving a planter or a bike. The 365-Day Done Right Promise backs every installation: if it isn’t right, we make it right. No argument, no fine print.
Our Gate Installation team coordinates dispatch and scheduling from our San Francisco Bay Area office, and crews serve Woodside locally with parts stocked for the brands families actually own here: FAAC, Viking, and LiftMaster among them.
Gate Installation Services in Woodside
Gate Installation Services in Woodside mean something specific: heavy custom ironwork, wide clearances, and hardware rated for decades of fog and oak duff. When a Woodside homeowner needs a new driveway gate, it’s rarely a stock panel from a catalog. It’s a bi-parting slide gate on a poured concrete footing, a dual-leaf ornamental swing gate with a matched pedestrian door, or a heavy ranch gate built to clear a horse trailer. A basic single-leaf steel driveway gate starts around $4,800. A custom ornamental iron estate gate with automation runs $9,000-$18,500 in this market.
Driveway and Estate Gates
Woodside driveway gates run 14-20 feet wide, often dual-leaf or bi-parting slide, because the driveway has to handle a truck pulling a two-horse trailer, not just a Prius. We set posts on poured concrete footings below the clay line, use heavy-duty hinges rated for the panel weight plus wind load, and confirm the gate clears the grade at full swing before we ever mount an operator.
Pedestrian and Ranch Gates
Older Woodside ranches from the 1940s-60s still have original post-and-board or tubular steel ranch gates, and when those finally fail it’s usually at the hinge post, not the panel. We match the look where it matters and upgrade the hardware where it counts, so a pedestrian gate doesn’t look like an afterthought next to a custom driveway gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Woodside
Electric Gate Installation in Woodside usually means pairing a heavy custom gate with an underground operator, loop detector, and matched intercom, because the driveway is long and the privacy expectation is absolute. A new automation package with operator, safety photocells, keypad, and one remote starts around $3,200 and goes up from there based on gate weight and access control needs. We install and program the operator, bury the power run, set the safety edges and photocells, and test the full cycle before we leave. A technician walks you through the controls and the manual release, and you get the written price before any of it starts.
Underground Operators
On a 16-foot ornamental iron swing gate, the operator has to live somewhere. Underground operators hide below grade at the hinge post and deliver a cleaner look than a visible arm, and they hold up better in Woodside’s damp soil when the housing is sealed and the weep holes are clear. We pair them with loop detectors for exit automation so the gate opens as you roll up, no button press needed.
Intercom and Camera Entry
Most Woodside installs include a matched intercom or camera entry system, because the gate is often the only visual confirmation of who’s at the property line. We wire the call station at the gate, connect it to your in-home monitor or phone app, and confirm audio and video work before we finish. If you have an existing LiftMaster or FAAC system, we’ll match the new equipment to it rather than rip it out and start over.
Trusted Brands We Service in Woodside
We’re factory-trained on the brands Woodside homeowners actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Woodside specifically, we stock FAAC and Viking replacement boards, LiftMaster operator arms, and Linear remote transmitters so we aren’t waiting on a distributor when your gate is down. If you have a commercial-grade FAAC on a ranch gate or a Viking operator on an estate slide gate, the tech who shows up already knows the wiring. You get the right fix on the first visit, not a parts guess.
Common Gate Installation Problems We See in Woodside Homes
- Rusted mild-steel hinge posts. The fog belt pushes marine moisture through the Santa Cruz Mountain gaps, and the oak canopy keeps gate hardware in near-constant shade. Mild-steel hinges and hollow-tube ironwork rust faster here than on sun-exposed lots in Menlo Park, and a rusted hinge post causes the gate to sag before the panel shows any wear.
- Oak acorns and redwood duff packing V-track grooves. Every October, coast live oaks drop acorns by the thousands, and within days they’ve packed into the track of an automatic slide gate. The operator strains, the gate stops halfway, and the photo-eye sensor trips. We clear the track and set sensor-cleaning as a standard step on every Woodside service call.
- Wood gates swelling and racking seasonally. Marine moisture makes wooden ranch gates swell in winter and shrink in summer. The gate binds on its frame, the latch misses the strike, and the loop detector and keypad post go out of alignment. A properly set post and a sealed, painted or stained panel reduces this, but it never fully stops it on a western-facing gate.
- Undersized operators on heavy custom gates. Some Woodside gates weigh 800 pounds or more, and an operator sized for a lightweight suburban gate will burn out in two seasons. We calculate gate weight and wind load before recommending an operator, because a too-small motor is the most common cause of a dead gate we replace.
Pricing for Gate Installation in Woodside, CA
A standard single-leaf steel driveway gate in Woodside runs $4,800-$7,200 installed. A custom ornamental iron dual-leaf swing gate, 14-16 feet wide with automation, typically runs $9,000-$18,500 depending on ironwork detail, site prep, and access control. Electric operator-only installs start around $3,200 with two remotes and a keypad. What moves the number: gate size and weight, whether the driveway slopes, soil conditions at the post footings, and how much trenching the power run needs. You’ll see the exact price in writing before any work starts. Call (626) 649-4572 and we’ll schedule a free measure and written quote.
We Also Serve Cities Near Woodside
Our Gate Installation crews cover Woodside and the surrounding Peninsula, and we regularly work in Los Angeles, San Diego, San Jose, and San Francisco for homeowners who want the same written-price, clean-up-photo standard on a second property or a rental.
Serving Woodside, CA - Our Local Coverage Area
We’re based in the Woodside area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Woodside
We use sealed bearing hinges instead of open mild-steel pins, powder-coat or zinc-prime the ironwork before hanging, and set the operator on a poured concrete footing with clear weep drainage. The rust comes from constant fog and shade under the oak canopy, so the fix is in the hardware selection, not extra grease. Call (626) 649-4572 and we’ll look at what’s on your gate now.
Falling coast live oak acorns and redwood duff pack into the V-track groove and trip the safety photocell or overload the operator’s current sensor. We blow out the track, clear the sensor lenses, and show you where the debris collects so you can spot it early. If it’s been happening for a few Octobers, we’ll quote a track guard or a taller rail to reduce the build-up.
Yes. We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we can pair new equipment with your existing boards and remotes where the wiring and power supply allow. You’ll know before we start whether it’s a re-use or a replacement, with the written price attached.
For a 16-foot dual-leaf gate on Woodside’s clay-and-loam soil, we dig the hinge post footing to at least 36 inches and pour the concrete below the frost and shrink-swell line. On a sloped driveway we go deeper and add rebar. The panel is heavy and the wind load through the hills is real, so the post has to be set like it’s holding a fence line, not a mailbox.
Yes. Automatic gates in California require entrapment protection: safety photocells, safety edges, or both, plus a manual release. We install and test the sensors on every new electric gate, and we show you how to test them monthly. The inspector will check them, and so will we, before we call the job done.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Woodside since 2009.