Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across San Jose
Gate installation in San Jose usually costs between $2,800 and $9,500 depending on whether you need a basic pedestrian gate, a heavy sliding driveway gate, or full automation with a commercial-duty operator. That’s the honest range you’ll see on any written quote from us before work begins. We work across San Jose, from the flatland tracts of Berryessa to the steep drives of Silver Creek Hills, and we know this city’s gates better than anyone. Call (626) 649-4572 for a free on-site estimate with a written price, no pressure, no surprises.
San Jose’s housing mix means we see two very different installation jobs. The 1980s and 90s tracts in Almaden Valley, Blossom Hill, and Evergreen hold thousands of homes with original ornamental iron and aluminum gates now 30 to 40 years old. Those need full replacement rather than repair. The older East Side neighborhoods around Alum Rock and Berryessa have smaller 1950s-through-70s lots where a simple driveway gate or pedestrian gate often makes the most sense. Either way, the process starts with a site visit to measure the opening, check the post footings, and confirm where power will come from.
Why Latch & Post Gate Repair Is San Jose’s Preferred Gate Installation Company
We’re part of the Cedarwell family of independently owned gate specialists, and we’ve focused on gates only since 2009. Nothing else. Not fences, not general carpentry, not handyman work. That focus is why we stock more gate motors, hinges, and controller parts than a San Jose homeowner would expect, and why our technicians are factory-trained on the brands families actually own, including FAAC, BFT, Linear, Viking, and more. When we show up in San Jose, we’re not learning on your gate. We’ve seen it before.
San Jose homeowners call us after a builder-grade setup fails or a previous owner’s DIY automation quits. They want a crew that cleans up, explains the price in writing, and treats the house with care. That’s the Gate Installation standard we work to on every job. Technicians arrive in uniform, background-checked, with shoe covers and drop cloths. They ask before moving anything and they photograph the cleanup before they leave. If you have kids napping or a dog that gets anxious, we can run quiet tools and schedule around the family’s rhythm.
When you call, a live person answers. That’s true at 2pm on a Tuesday and 2am on a holiday. No voicemail tree, no callback queue. You tell us what’s going on with your gate in San Jose, and we get you on the schedule with a firm written price before any work starts.
Gate Installation Services in San Jose
Gate Installation Services in San Jose covers everything from a single pedestrian gate on the side of a home to a full double driveway gate with automation. The job starts with measuring the opening and checking what’s under the ground. In San Jose, what’s under the ground matters more than people expect. Footings move. Grades change. A gate that looks simple from the curb can be a real project on a hillside lot. We handle the concrete work, the post setting, the hinges, the latch, the panel alignment, and the finish so the gate swings or slides cleanly for years.
Driveway and Security Gates
A standard driveway gate in San Jose runs $2,800 to $6,500 installed, depending on width, material, and whether you want a single swing or a double gate. Security gates with steel framing and ornamental infill run higher, usually $5,000 to $9,500, because the post footings need to be deeper and the panel heavier. We quote the exact number in writing before anything gets built.
Pedestrian and Walk Gates
A pedestrian gate on a San Jose side yard typically runs $1,200 to $3,200, including new posts set in concrete. If you’re replacing a rotting wooden gate on an older Alum Rock or Cambrian Park property, that’s the simple version. If you want it automated with a keypad for deliveries or a dog run, we’ll spec a small FAAC or BFT operator matched to the panel weight.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in San Jose
Electric Gate Installation in San Jose means more than bolting a motor onto an existing gate. It means a dedicated 110V power run, conduit, a properly sized operator, safety edges or photoeyes, and often a loop detector or keypad. We do the electrical work, the controller mounting, and the calibration. When we finish, the gate opens and closes on its own with the limits set correctly and the safety features tested. Typical electric gate installation in San Jose runs $3,500 to $9,000, with the higher end covering commercial-duty operators for steep grades and heavy steel panels.
Automating an Existing Manual Gate
If your San Jose home was built with a manual gate, adding an opener usually costs $2,400 to $5,500 on top of any hinge or post work. The catch is that manual gates often sit on posts and footings that were never meant for powered cycling. We inspect those first. If the footing has shifted from Calaveras Fault settling or years of ground movement, we may need to pour a new one before we mount the operator. That’s the difference between a gate that works for a season and one that works for a decade.
New Builds and Retrofit Power Runs
Developers in San Jose’s 80s and 90s tracts ran power for lights and outlets but rarely pulled a dedicated circuit to the hinge post area for a gate operator. If your Evergreen or Silver Creek Hills home falls in that category, we trench a new conduit run from the panel, usually along the driveway edge or under a planter bed, and pull a dedicated 110V line. That run is part of the written quote, not a surprise add-on.
Trusted Brands We Service in San Jose
Our San Jose technicians are factory-trained on FAAC, BFT, Linear, and Viking equipment, along with LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule. We keep common FAAC and BFT boards, arms, and limit switches in our Bay Area service stock, which means faster turnaround for San Jose repairs and installs. When a gate loses its limits after a small quake, we’re not waiting a week for a part to ship. We show up with what we need.
Common Gate Installation Problems We See in San Jose Homes
- Builder-grade operators on steep driveways. Silver Creek Hills and Evergreen Hills driveways often run 10 to 15 percent grade. A standard residential operator can’t hold that load, so it stalls mid-travel and burns out motors. We default to commercial-duty units on any uphill slide install in the eastern foothills.
- No dedicated power run for the gate. Many 1980s and 90s homes in Almaden Valley and Blossom Hill have lights and outlets on the driveway but no circuit for a gate operator. Retrofit trenching is the most common unplanned cost we see.
- Manual gates retrofitted with big-box openers. We regularly pull off solar operators that were never rated for the panel weight or the grade. A lot of San Jose homeowners learn this the hard way after the first winter rain.
- Seismic settling knocks limits out of alignment. The Calaveras Fault runs through the eastern foothills. A minor micro-event shifts concrete footings by fractions of an inch, and suddenly the gate binds or the operator over-torques and throws its limit switches.
Pricing for Gate Installation in San Jose, CA
Here are the honest numbers for gate installation in San Jose. A pedestrian gate runs $1,200 to $3,200. A single driveway swing gate runs $2,800 to $6,500. A double driveway gate runs $4,500 to $8,500. Full electric automation on flat ground runs $3,500 to $6,000, and on steep eastern foothill driveways with commercial-duty operators it runs $6,000 to $9,500. What moves the number is the panel material and weight, the post footing depth, the power run distance, and whether we’re automating an existing gate or building new. We write the exact price before any work starts, and that number doesn’t change unless you change the scope. Call (626) 649-4572 for a free on-site estimate.
We Also Serve Cities Near San Jose
We work in San Jose and the surrounding cities, including Milpitas, Santa Clara, Sunnyvale, and Campbell. If you’re just outside San Jose proper in one of those communities, the same crew covers your area. Our dispatch and scheduling is coordinated from the brand’s San Francisco Bay Area office, and crews serve San Jose locally. For more on our full service area, see Gate Installation in San Jose.
Serving San Jose, CA - Our Local Coverage Area
We’re based in the San Jose area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in San Jose
No, and we’d advise against trying. Driveways in Silver Creek Hills, Evergreen Hills, and parts of Almaden Valley often run 10 to 15 percent grade, and a standard residential operator rated for flat ground will stall or burn out under that torque load. You need a commercial-duty motor sized for the panel weight and the slope. We had one Silver Creek Hills job where a big-box solar unit failed every winter until we pulled it and set a commercial FAAC slide operator on new rack and pinion. It has held calibration through two wet seasons since. Call (626) 649-4572 and we’ll measure the grade and tune the operator to it.
It takes four things: a dedicated 110V power run, a properly pour post footing if the existing one was never built for powered cycling, an operator sized for the panel, and safety edges or photoeyes. Most 90s San Jose tracts never had a gate circuit pulled, so you’ll likely need trenching from the panel to the hinge post. That power run is part of your written quote, not an add-on. The whole job usually lands between $3,500 and $7,000 depending on panel weight and gate width.
The Calaveras Fault runs through the eastern San Jose foothills, and even micro-seismic events shift concrete footings by fractions of an inch. That’s enough to knock a gate out of alignment so it binds against the post and throws its limit switches. The fix is usually a new footing pour plus a controller recalibration, and in many cases a commercial-duty operator better matched to the panel and grade. We see this pattern all over Silver Creek Hills and Evergreen Hills, and it’s far less common in flatland cities like Santa Clara or Sunnyvale.
Yes. We install loop detectors in the driveway approach, keypad entry with one-time codes for deliveries, intercom options, and smartphone controls. On HOA-governed communities in Almaden Valley where guest access matters, we’ll set up a keypad or app-based entry so you don’t have to walk to the gate. These are quoted line by line in your written estimate.
It’s usually the weather, but the blame belongs to the original install. San Jose’s dry summers hit the mid-to-upper 90s, and the winter rains bring moisture back into the soil. That expand-and-contract cycle moves the post footings and the gate binds. On hillside Almaden Valley lots the compacted soil also settles unevenly between wet and dry months. The fix starts with footing assessment rather than just greasing hinges. Call (626) 649-4572 and we’ll check the alignment before recommending work.
Every gate comes down to two parts. The latch that holds it and the post that carries it. That’s the job we focus on in San Jose. If your gate is sagging, binding, or simply too old to trust, call us at (626) 649-4572 for a free written estimate. We’ll show up on time, leave your driveway cleaner than we found it, and stand behind the work with a 365-Day Done Right Promise.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving San Jose since 2009.