Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Woodside, CA
Gate work in Woodside is different from anywhere else on the Peninsula. Most homes here sit on acre-plus lots behind long driveways, and the gates are built to a scale you simply don’t see in neighboring cities – 14 to 20-foot dual-leaf iron gates, heavy wood-and-steel ranch gates, and slide gates on V-track systems that carry horse trailers and farm equipment, not just the family SUV. The fog and redwood canopy keep everything damp year-round, which means rust, swelling, and sensor trouble show up faster here than almost anywhere in the Bay Area. We’re Latch & Post Gate Repair, part of the Cedarwell family of gate specialists, and we work on the hardware Woodside actually has. Call (626) 649-4572 any hour – a live person answers.
Why Woodside Homes Are Different
Woodside’s housing stock spans two distinct eras. The 1940s through 1960s horse ranches still have their original post-and-board or tubular steel gates, many of them swung on hinges that predate modern bearing designs. The newer estates lean the other direction: custom ornamental iron on long, oak-shaded drives, often 14 to 20 feet wide and built as dual-leaf or bi-parting slide systems. Both types share one thing – they’re heavy. A Woodside gate post carries more load than a standard residential post in Redwood City or Menlo Park, and when a post shifts in saturated clay soil, the whole gate racks and binds.
The climate does the rest. Woodside sits in the fog belt at the base of the Santa Cruz Mountains, where marine moisture pushes through the gaps in the hills and the dense oak and redwood canopy keeps gate hardware in near-constant shade. Mild-steel hinges rust faster here. Hollow-tube ironwork collects moisture from inside. Wood gates swell in winter, rack in the wet-dry cycle, and bind against their frames every spring. We quote for these conditions the first time – not after we’ve already been out twice.
There’s also the acorn factor. Coast live oaks drop acorns, bark, and duff onto Woodside driveways from September through November, and it all ends up packed into V-track grooves, throwing photo-eye sensors off and tripping the automation. A technician who knows Woodside carries compressed air on every call and quotes a sensor-cleaning and track-clearing step as standard in the fall. It’s a small thing, but it’s the difference between a gate that works after one visit and a gate that faults again in a week.
Our Main Woodside Services
Woodside homeowners call us most about three things: a gate that won’t close or latch, a full replacement on an estate-scale driveway, and electric gate systems that have stopped responding. Each service has its own Woodside page with pricing and details.
Gate Repair in Woodside
A sagging 18-foot iron gate in Woodside usually isn’t a hinge problem – it’s a post problem. The clay soil here holds water through the winter, posts lean under the weight of heavy leafs, and the gate grinds or refuses to latch. We set posts in concrete, rebuild hinge mounts, straighten racked frames, and replace latches on ranch gates built for horses and trailers, not just people. See Gate Repair in Woodside for the full breakdown of what a typical repair costs and how we work around your driveway.
Gate Installation in Woodside
A new gate on a Woodside estate means something all together different from a standard suburban install. The opening is wider, the gate is heavier, and the finish needs to hold up under fog, shade, and decades of acorn duff. We handle custom iron and wood-and-steel builds, dual-leaf and slide systems, and we measure, order, and schedule with a written price before anything is fabricated. Gate Installation in Woodside covers the full process and what to expect for timing on custom work.
Electric Gate Repair in Woodside
Electric gates in Woodside run on commercial-grade operators – FAAC, Viking, LiftMaster – and they fail most often from moisture in the control box, a tripped photo-eye packed with oak debris, or a limit switch that’s drifted out of adjustment. We arrive with the parts truck stocked, run the diagnostic, and fix the issue on the first visit whenever the part is on the shelf. Electric Gate Repair in Woodside has the full rundown – operator brands, common faults, and what a service call includes.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Woodside
We’re factory-trained on the brands families in Woodside actually run: FAAC, BFT, Linear, and Viking show up on most of the estate driveways we see, along with LiftMaster and Ghost Controls on the ranch properties. The parts truck carries common boards, remotes, photo-eyes, and hinges, so most repairs turn around same-day. See our brands for the full list and what we stock.
Pricing for Gate Company in Woodside, CA
| Service | Typical range in Woodside |
|---|---|
| Gate latch replacement (standard) | $180 – $340 |
| Hinge replacement (weld-on, single hinge) | $150 – $300 |
| Gate post reset (single post in concrete) | $400 – $900 |
| Sagging gate repair (frame straightening + hardware) | $350 – $800 |
| Gate opener motor replacement | $650 – $1,400 |
| Control board replacement | $300 – $700 |
| Photo-eye sensor replacement | $150 – $350 |
| Full gate installation (single swing gate) | $2,500 – $6,000 |
| Full gate installation (dual-leaf or slide) | $6,000 – $15,000+ |
Woodside pricing runs toward the upper end of these ranges because the gates are heavier, the posts are deeper, and the hardware is commercial-grade. The written price you get before we start is the price you pay – no surprises, no add-ons, no fine print.
Neighborhoods We Serve in Woodside
We work driveways across Woodside, from the flats near Canada Road up into the hills off Kings Mountain and Skyline. Most jobs we reach within 24 to 48 hours of the call, and emergency calls get same-day scheduling when a gate is stuck open or a post has failed.
- Central Woodside – the original horse ranches and oldest gate hardware in town
- Woodside Hills – estate drives with custom iron and slide gates
- Kings Mountain Road corridor – steep lots, fog-heavy, wood gates that swell seasonally
- Canada Road area – equestrian properties with wide trailer gates and long posts
- Skyline corridor – redwood-shaded drives where moisture never fully dries
Service Area – Cities Near Woodside
Latch & Post Gate Repair coordinates scheduling from our San Francisco Bay Area office, and crews serve Woodside locally. If you own property elsewhere in the state, we also have pages for Los Angeles, CA, San Diego, CA, San Jose, CA, and San Francisco, CA.
Serving Woodside, CA - Our Local Coverage Area
We’re based in the Woodside area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Woodside
For a gate stuck open, a post that’s failed, or an electric gate that won’t open at all, most Woodside calls get same-day or next-day scheduling. Standard repairs are usually on-site within 24 to 48 hours. Call (626) 649-4572 and a live person will give you a straight answer on timing – no voicemail, no callback queue.
In most cases, replacing a gate on existing posts doesn’t trigger a permit in Woodside, but new posts, new footings, or changes to the driveway approach can. We handle the legwork on our end – if a permit is needed, we’ll tell you before any work starts and build it into the written price. Nothing gets fabricated until you know the full picture.
Yes, and we treat that as part of the job, not an afterthought. We knock before entering any fenced area, keep tools and materials staged away from animal paths, and use pet-safe lubricants where there’s a choice. If you need us to work around feeding times or a nervous horse, tell the person who answers the phone and we’ll schedule around it. We also lay shoe covers and drop cloths inside the house so floors stay clean.
The written price covers everything we’re going to do – parts, labor, the track-clearing and sensor-cleaning step on slide gates if yours is a V-track or a photo-eye issue, and the clean-up. You approve it before we touch anything. If the job turns out to need something we didn’t see during the quote, we stop, explain it, and get a new written price before continuing. Call (626) 649-4572 for a free estimate – the quote is always free, and there’s no pressure to accept.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Woodside Customers Say
"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick