Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Tiburon
Tiburon gate installation projects carry a specific weight here, and we mean that literally: the bay wraps this peninsula on three sides, so salt-laden air works on gate hardware year-round, while steep hillside driveways put constant torque stress on hinges and operators. Most Tiburon homeowners need a gate built for both conditions, not one or the other. We coordinate dispatch and scheduling from our San Francisco Bay Area office, and crews serve Tiburon every week. For a free written estimate on a new driveway gate, pedestrian gate, or full electric gate installation in Tiburon, call (626) 649-4572.
Key Takeaways
- Salt air from the bay corrodes standard gate hardware in Tiburon three to five years faster than inland Marin
- Steep hillside lots on Paradise Cay and Point Tiburon demand higher-torque operators and reinforced hinge posts
- We spec 316 stainless fasteners and sealed operators as baseline, not upgrade, on every Tiburon job
- Written price before any work starts; shoe covers, drop cloths, and cleanup photo on every visit
- Live person answers 24/7; call (626) 649-4572 for a free estimate
Why Latch & Post Gate Repair Is Tiburon’s Preferred Gate Installation Company
We’re part of the Cedarwell family of independently owned and operated gate specialists, founded in 2009, and our Gate Installation team works exclusively on gates: driveway gates, pedestrian gates, electric gates, and the automation that runs them. Cody Beckman leads our crews, and every technician who comes to a Tiburon home is background-checked, uniformed, and factory-trained on the brands families here actually run: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. No general handyman work, no big-box subcontracting.
Tiburon homeowners call us for Gate Repair - Tiburon because we say the specific thing, not the vague thing. We’ll tell you that a galvanized hinge post on a Paradise Cay hillside driveway typically fails at the footing before the gate panel ever sags mid-panel. We’ll tell you that morning fog off the bay gets into operator control boards through unsealed seams, and that a DoorKing or Viking board can die from moisture intrusion within two wet winters. We’ll name the fastener grade that actually survives on Point Tiburon blocks: 316 stainless, not zinc-plated, not painted steel. That specificity, plus a written price before any work starts, is why homeowners here keep our number.
Gate Installation Services in Tiburon
Gate Installation Services in Tiburon cover the full job: setting posts, hanging the gate panel, mounting the operator if the gate is automated, aligning hinges and latch, and making sure the gate swings or slides true the day it goes in and the year after. We also handle the parts most crews rush: concrete footings that hold a hillside post against gravity, corrosion-inhibiting lubrication on every pivot point before final tightening, and cleanup so thorough we photograph it before we leave. A standard single swing driveway gate in Tiburon typically runs $1,800-$4,200, while a sliding gate with operator runs $3,500-$7,500 depending on panel material and grade.
Driveway and double gates on steep lots
Many Tiburon driveways climb at grades that would stall a standard operator. We size the torque to the actual load: the grade, the panel weight, and the wind that comes off the bay in the afternoon. For double gates, we align both leaves to meet cleanly with no gap at the latch, and we set the hinge post footings deeper than code minimums because here, the post gives way before the panel does.
Pedestrian and security gates with marine-grade hardware
Pedestrian gates on Tiburon side yards and walk-throughs need the same salt-air resistance as the big driveway gates. We use 316 stainless hinges, latches, and fasteners on every pedestrian gate install, and we offer panel materials that hold up in bay air: powder-coated aluminum, marine-grade cedar, or steel with a two-coat epoxy primer under the finish. Security gates get the same treatment plus a deadbolt-rated latch.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Tiburon
Electric Gate Installation in Tiburon means more than mounting an operator. Here it means sealing wiring penetrations against fog, installing control boards in weatherproof housings with desiccant packs where useful, and routing low-voltage cabling so it never sits in standing saltwater runoff. We install LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, and we program photo-eyes, edge sensors, and keypads on site. A typical swing gate automation retrofit in Tiburon runs $2,200-$5,000; a full new automated gate with operator usually lands between $4,500 and $9,000.
Automation for marine air and fog
The operator we install on a Point Tiburon property is not the same spec we’d put on a driveway in Novato. Sealed control boards, conformal-coated circuit boards, and stainless mounting hardware are standard here. We also set programming so the gate doesn’t fight the afternoon wind: soft-start and soft-stop settings reduce the torque load that burns out motors on exposed hillsides.
Safety edges, photo-eyes, and code compliance
Tiburon requires automated gates to meet current UL 325 safety standards, which means photo-eyes at the drive and non-contact edge sensors where the gate could trap a person or pet. We pull permits when required, coordinate with Marin County inspectors, and leave the homeowner with a written test log showing every safety device was triggered and verified. Your kids and dogs are the reason we test twice. We mention this because it matters, not because it’s an upsell.
Trusted Brands We Service in Tiburon
We stock local parts for Tiburon customers in our Bay Area service vehicles, so a failed Viking arm or a Ghost Controls limit switch doesn’t mean a two-week backorder. Our techs are factory-trained on DoorKing and Elite alongside LiftMaster, FAAC, BFT, Linear, and Mighty Mule. That means when your DoorKing 9150 board dies from fog intrusion, we have the replacement and the programming knowledge on hand, often the same visit. When your Viking swing arm pits from salt air, we swap in a sealed or stainless-reinforced equivalent rather than bolting on the same part that just failed. Tiburon homes run these brands disproportionately, so we keep the common failure parts stocked and the uncommon ones locatable within a day.
Common Gate Installation Problems We See in Tiburon Homes
- Pitted weld seams and seized hinges. Salt-laden marine air off the bay attacks welds first: the heat-affected zone around a weld is metallurgically more reactive. On Point Tiburon and Paradise Cay-adjacent blocks, standard galvanized or painted steel shows pitting within three to five years. We now spec 316 stainless fixings and marine-grade coated steel for every coastal install.
- Moisture-intruded operator control boards. Morning bay fog deposits water inside motor housings and control boards. We see intermittent faults, random opener reversals, and premature board death on LiftMaster, FAAC, and BFT units exposed to fog for two winters. Sealed housings and conformal-coated boards stop it.
- Hinge post sag before panel sag. On steep Tiburon hillside driveways, the hinge post footing gives way under constant gravity and torque load before the gate panel ever visibly sags. We re-set footings deeper and wider than typical Marin specs, then re-hang the panel so it clears the grade.
- Operator burnout from wind and grade. Afternoon wind off the bay plus a 12% driveway grade means a standard residential swing operator works harder every cycle. The motor runs hot, the arm wears, the board stresses. We size higher-torque units with soft-start programming so the same operator survives here the way it would inland.
Pricing for Gate Installation in Tiburon, CA
Most Tiburon gate installation projects land in clear ranges, and you’ll see the exact written price before any work begins. Standard single swing driveway gate: $1,800-$4,200. Sliding gate with operator: $3,500-$7,500. Electric gate automation retrofit on an existing gate: $2,200-$5,000. Full new automated gate with operator: $4,500-$9,000. Marine-grade hardware and 316 stainless fasteners add material cost, but on the coast they’re the difference between a five-year gate and a thirty-year gate. We always quote the price before any work starts, in writing, with no pressure to accept. Call (626) 649-4572 for a free estimate on your specific gate.
We Also Serve Cities Near Tiburon
Our crews serve Tiburon every week, and we also handle gate installation work for homeowners down the peninsula and across the bay: Los Angeles, San Diego, San Jose, and San Francisco. If you live in a nearby city and need a coach or gate specialist, call us at (626) 649-4572 and we’ll get you the same written-price, cleanup-photo service we bring to Gate Installation in Tiburon.
Serving Tiburon, CA - Our Local Coverage Area
We’re based in the Tiburon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Tiburon
Because Tiburon sits on a three-sided peninsula, so salt-laden marine air reaches your gate from nearly every direction. San Rafael sits inland enough that the same hardware lasts years longer. On Tiburon’s Point Tiburon and Paradise Cay waterfront blocks, even hardware sold as weather-resistant shows seized hinges and pitted weld joints within three to five years. The fix is spec: 316 stainless fasteners, marine-grade coated steel or powder-coated aluminum panels, and sealed operator housings. Call (626) 649-4572 and we’ll assess your current gate and tell you exactly what’s corroding and what replacement spec will actually hold up.
Most likely yes. Driveways on Tiburon’s hillside lots often run 10-15% grade, which puts constant gravity load on the hinge post and continuous torque strain on the operator. A standard residential swing operator rated for flat run will burn out early. We size higher-torque units with soft-start and soft-stop programming so the motor isn’t shocked on every cycle. We test the load at site with the actual gate panel weight, the grade, and the wind exposure off the bay. Call (626) 649-4572 for a load calculation on your driveway.
Install 316 stainless hinges, latches, and fasteners; a panel material that doesn’t pit, like powder-coated aluminum or marine-grade cedar; a sealed operator with conformal-coated control boards; and wiring penetrations sealed against fog and rain. Skip zinc-plated fasteners entirely. Skip painted steel unless it has a two-coat epoxy primer under the finish. We spec these as baseline on every Tiburon job, not as an upgrade. They cost more up front and pay back by not failing at year four. Call (626) 649-4572 for a written line-item quote on the spec that works here.
Yes. Every automated gate installed in Tiburon must meet current UL 325 safety standards, which require photo-eyes at the drive and non-contact edge sensors where the gate could trap a person or pet. We install both, test them in front of you, and leave a written test log. On a Paradise Cay waterfront estate we recently replaced a seized LiftMaster swing gate operator, re-set the hinge post footing because the panel had been sagging against a failing post, and swapped every zinc-plated fastener for 316 stainless. The safety devices were part of the same install, tested and documented. Call (626) 649-4572 to schedule.
On the Tiburon coast, we recommend a corrosion-inhibiting lubrication and inspection service every 12 months. The bay fog and salt air work on pivot points, hinges, and control boards year-round, so annual service here is what semi-annual service would be inland. We apply corrosion-inhibiting lubricant to every moving part, check torque settings, test photo-eyes and edge sensors, and inspect the board for moisture intrusion. Most Tiburon homeowners who take this schedule get decades from their gates. Call (626) 649-4572 to book your annual service or a free estimate.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Tiburon since 2009.