Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Tiburon
Gate repair in Tiburon means dealing with salt air before it deals with your gate. Most driveway gate failures we see here trace back to the bay: pitted weld seams, seized hinges, fog-shorted operator boards. We respond to Tiburon homes within the day in most cases, and every job starts with a written price before any work begins. Call (626) 649-4572 to schedule a visit. A live person answers around the clock.
Why Latch & Post Gate Repair Is Tiburon’s Preferred Gate Repair Company
Tiburon homeowners don’t call the first gate company they find. They call the one that knows what the bay does to a gate. Latch & Post Gate Repair has been part of the Cedarwell family since 2009, and our crews spend their days on hillside driveways in Paradise Cay, Point Tiburon, Belveron, and the ridge streets above downtown. We know which operators hold up to fog and which hinges corrode fastest on the water-adjacent blocks. Our Gate Repair team carries stainless fasteners, marine-grade hinge assemblies, and sealed board enclosures as standard kit, not special order.
Every technician is background-checked, uniformed, and trained on the brands families here actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The 365-Day Done Right Promise covers every repair, every install. If it isn’t right, we make it right. No fine print.
Driveway Gate Repair in Tiburon
Driveway Gate Repair in Tiburon comes down to two things: the gate has to swing or slide true, and the operator has to move it without strain. On a flat lot in San Rafael a misaligned gate might limp along for months. On a Tiburon hillside, gravity pulls constantly on the hinges and the operator, so a small sag becomes a dead gate within weeks. We reset hinge geometry, replace worn or seized pivots, re-level the gate panel, and re-tune the operator so it isn’t fighting the grade. Most standard driveway gate repairs in Tiburon run $220 to $680, depending on parts and gate weight. You’ll see the exact number in writing before we touch anything.
Hinge-Post Reset and Slope Correction
Tiburon’s steep driveways put steady lateral force on hinge posts. Concrete footings crack, posts lean, and the gate starts dragging at the latch side. We cut out the shifted footing, reset the post with stainless through-bolts, and re-hang the gate so the operator isn’t working against a leaning post. On water-adjacent blocks we use galvanized or powder-coated posts instead of bare painted steel.
Operator Strain Repairs
When a gate drags, the operator burns through gears and boards faster. We find the drag first, fix it, then assess the operator. Often the motor is fine and just needs the load taken off it. That’s a $140 to $260 repair in Tiburon, versus the $900 to $1,800 a full operator replacement might cost if the drag stays uncorrected.
Gate Welding in Tiburon
Gate Welding in Tiburon is where salt air does its worst work. Weld seams on ornamental iron gates are the first place the bay eats through: hairline cracks open at the joints, moisture sits in them, and pitting spreads from the inside. On Point Tiburon and Paradise Cay-adjacent streets we routinely see ‘weather-resistant’ hinges and pitted welds three to five years after install, a corrosion cycle that inland San Rafael or Novato gates on identical hardware don’t hit for a decade. We grind back the failed weld, repair the joint, and re-coat with a marine-grade zinc-rich primer before finish paint. Most weld repairs in Tiburon run $180 to $420 per joint, or $350 to $900 when multiple points need work.
Weld Seam Reconstruction on Ornamental Iron
We don’t just lay another bead over rust. The pitted section gets cut out, the joint gets cleaned to bright metal, and the new weld ties into solid material on both sides. The repair gets the same marine-grade coating sequence as new marine hardware, which is the only spec that lasts here.
Post-Top and Hinge Weld Repair
Hinge barrels welded to the post or gate frame are the most common failure point on Tiburon gates. Stress from wind off the bay and the constant slope load crack those welds open. We re-weld the hinge barrel, gusset the connection where the gate is heavy, and set the hinge so it isn’t carrying the entire gate load on one point.
Trusted Brands We Service in Tiburon
We are factory-trained on the operator brands most Tiburon homeowners already have, including FAAC, BFT, Linear, and Viking, alongside LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we see the same marine-environment failures across every hillside street, we stock the parts that fail most on Tiburon gates: sealed enclosure kits for control boards, corrosion-resistant limit switches, stainless hinge assemblies, and marine-grade fasteners. That means most repairs happen same visit, not after a parts run to a supplier across the county.
Common Gate Repair Problems We See in Tiburon Homes
- Seized swing-gate hinges and pitted weld seams on ornamental iron within three to five years on streets closest to the water, where salt air reaches the pivot points directly. This is a Tiburon-specific corrosion pattern, not a general wear issue, and requires stainless or sealed-bearing hinges to break the cycle.
- Gate operator control boards and motor housings shorting from repeated bay-fog moisture intrusion, especially on hillside lots where the unit sits exposed to afternoon wind off the bay. Sealed enclosures and corrosion-inhibiting maintenance stop the board from failing again in the next fog cycle.
- Hinge-post movement and footing drift on steep Tiburon driveways, where constant gravity load on a swing or slide gate accelerates sag correction demands and throws rack-and-pinion alignment off. Posts need through-bolted stainless anchors, not just concrete set into old fill.
- Rack-and-pinion misalignment on slide gates where the grade has settled and the rack no longer lines up with the pinion gear. We re-shim the track, re-space the rack, and re-set travel limits so the operator doesn’t grind itself apart.
Pricing for Gate Repair in Tiburon, CA
Here are honest numbers for the Tiburon market. A seized hinge repair runs $120 to $240 per hinge. Gate realignment with operator re-tune runs $220 to $480. Weld repair on a single joint runs $180 to $420. Operator board replacement runs $280 to $650 depending on brand and board type. Full operator replacement on a Tiburon driveway gate runs $900 to $1,800 installed. What moves the price: gate weight, how steep the grade is, and whether the hardware is standard steel or marine-spec. The quote you get is the price you pay, written before work starts, and the 365-Day Done Right Promise covers it. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Tiburon
While this page speaks to Tiburon homeowners, our crews also work throughout the Bay Area. We take on gate repair jobs in Tiburon, plus San Francisco, San Jose, and the broader Bay Area. If you live outside Tiburon, call us and we’ll tell you straight whether we can get a crew to your property.
Serving Tiburon, CA - Our Local Coverage Area
We’re based in the Tiburon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tiburon
Plan on three to five years before standard ‘weather-resistant’ hinges, weld seams, and fasteners show serious pitting and seizure on water-adjacent Tiburon properties. On blocks within reach of the bay, salt-laden air reaches the pivot points directly. The fix is marine-grade hardware, stainless fasteners, and sealed-bearing hinges from the start. Call (626) 649-4572 and we’ll walk your gate and tell you what’s ageing and what still has life.
On a steep Tiburon driveway it’s almost always the gate first. Hinge-post shift and hinge wear create drag, and the operator is the part that suffers. We find the drag, fix the gate geometry, then assess the operator. Often the motor is fine once the load is off it. Estimates are free, and the written price covers the whole job before we begin.
Yes. Bay fog and salt air on a three-sided peninsula reach every exposed gate component. Stainless fasteners, sealed-bearing hinges, marine-grade coatings, and sealed operator enclosures are functional requirements here, not upgrades. Standard painted steel hardware fails in three to five years on waterfront blocks. Call (626) 649-4572 to find out which components on your gate are already compromised.
We are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We carry the sealed enclosure kits and corrosion-resistant parts that keep these operators running through Tiburon’s fog season, and we don’t push a replacement when a board swap will do. Estimates are free and the written price is delivered before work starts.
Yes, and Tiburon is one of the few residential markets where this is a straightforward sell, not a sales tactic. An annual visit covers hinge lubrication with corrosion-inhibiting compound, board diagnostics, seal checks on the operator enclosure, and weld inspection. That visit costs less than one seized-hinge emergency call, and it catches the pitting before it becomes a full weld repair. Call (626) 649-4572 for pricing on a maintenance visit.
On a Paradise Cay-adjacent hillside driveway, a LiftMaster operator on a custom ornamental iron swing gate had stopped mid-travel because fog moisture had reached the control board and the hinge-post footing had shifted on the slope. We cut out the pitted weld at the top hinge, reset the gate on a new hinge post with stainless through-bolts, and swapped the operator board into a sealed enclosure. The gate now runs smooth through the full cycle even on a foggy morning.
Every gate comes down to two parts, the latch that holds it and the post that carries it. That’s the job we focus on. And on every visit we lay drop cloths on the floor, put on shoe covers before stepping inside, choose pet-safe lubricants where there’s a choice, and schedule around nap time if quiet matters. We clean up like it’s our own home, ask before we move or touch anything, respect the family’s time and quiet hours, explain the price before the work, and send a photo of the clean-up before we leave.
For gate repair in Tiburon, call (626) 649-4572. The price is written before work starts, a live person answers day or night, and the job is covered by the 365-Day Done Right Promise.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, part of the Cedarwell family of independently owned and operated gate specialists since 2009.